Strategic guidelines for street canyon geometry to achieve sustainable street air quality—part II: multiple canopies and canyons

Abstract The flow field and pollutant dispersion characteristics in a three-dimensional urban street canyon are investigated for various building array geometries. The street canyon in consideration is located in a multi-canopy building array that is similar to realistic estate situations. The pollutant dispersion characteristics are studied for various canopy aspect ratios, namely: the canyon height to width ratio, canyon length to height ratio, canyon breadth ratio and crossroad locations are studied. A three-dimensional field-size canyon has been analysed through numerical simulations using k − e turbulence model. As expected, the wind flow and mode of pollutant dispersion is strongly dependent on the various flow geometric configurations and that the results can be different from that of a single canyon system. For example, it is found that the pollutant retention value is minimum when the canyon height-to-width ratio is approximately 0.8, or that the building height ratio is 0.5. Various rules of thumbs on urban canyon geometry have been established for good pollutant dispersion.

[1]  J. Counehan,et al.  Wind tunnel determination of the roughness length as a function of the fetch and the roughness density of three-dimensional roughness elements , 1971 .

[2]  Jong-Jin Baik,et al.  Urban street-canyon flows with bottom heating , 2001 .

[3]  Marcel Bottema,et al.  Urban roughness modelling in relation to pollutant dispersion , 1997 .

[4]  Jong-Jin Baik,et al.  A Laboratory Model of Urban Street-Canyon Flows , 2000 .

[5]  Erich J. Plate,et al.  Wind-tunnel study of concentration fields in street canyons , 1999 .

[6]  H. Park,et al.  PARAMETERIZATION OF THE POLLUTANT TRANSPORT AND DISPERSION IN URBAN STREET CANYONS , 1994 .

[7]  Michael Schatzmann,et al.  Wind tunnel measurements of concentration fluctuations in an urban street canyon , 1999 .

[8]  W. Hung,et al.  Validation of a two-dimensional pollutant dispersion model in an isolated street canyon , 2002 .

[9]  G. T. Johnson,et al.  An investigation of three-dimensional characteristics of flow regimes within the urban canyon , 1992 .

[10]  Numerical Study on Flow over Buildings in Street Canyon , 2001 .

[11]  Jong-Jin Baik,et al.  A Numerical Study of Thermal Effects on Flow and Pollutant Dispersion in Urban Street Canyons , 1999 .

[12]  A. Chan.  Atmospheric turbulent boundary layer development due to a change in surface roughness , 2001 .

[13]  Sandrine Anquetin,et al.  Pollutant dispersion and thermal effects in urban street canyons , 1996 .

[14]  T. Oke.  Street design and urban canopy layer climate , 1988 .

[15]  Takashi Asaeda,et al.  Characteristics of wind field in a street canyon , 1995 .

[16]  Michael Schatzmann,et al.  Study of line source characteristics for 2-D physical modelling of pollutant dispersion in street canyons , 1996 .

[17]  Sang Jin Jeong,et al.  Application of the k–ε turbulence model to the high Reynolds number skimming flow field of an urban street canyon , 2002 .

[18]  Mitsuru Arai,et al.  A two-dimensional air quality model in an urban street canyon: evaluation and sensitivity analysis , 2000 .

[19]  W. Theurer.  TYPICAL BUILDING ARRANGEMENTS FOR URBAN AIR POLLUTION MODELLING , 1999 .