Properties of BaTiO3-Al2O3 composite oxide films prepared by sol-gel coating and anodization

[1]  L. Xiang,et al.  Preparation of titanium dioxide films on etched aluminum foil by vacuum infiltration and anodizing , 2016 .

[2]  Fei Chen,et al.  Formation Behavior of Multi-Layer Oxide Films on Etched Al Foil by Vacuum Infiltration and Anodization , 2015 .

[3]  Jianhua Liu,et al.  Effect of TiO2 nanostructures on specific capacitance of Al2O3–TiO2 composite film on etched aluminum foil formed by the sol–gel and anodizing , 2014 .

[4]  Zhishen Wang,et al.  Effects of polymer corrosion inhibitor on widening etch tunnels of aluminum foil for capacitor , 2014 .

[5]  G. Saint-Girons,et al.  Molecular beam epitaxy growth of BaTiO3 thin films and crucial impact of oxygen content conditions on the electrical characteristics , 2012 .

[6]  Wenxi Guo,et al.  Electrophoresis Deposition of TiO2 Nanoparticles on Etched Aluminum Foil for Enhanced Specific Capacitance , 2012 .

[7]  Jong‐Min Oh,et al.  Thickness limit of BaTiO3 thin film capacitors grown on SUS substrates using aerosol deposition method , 2010 .

[8]  Youlong Xu,et al.  Formation of Al2O3-BaTiO3 composite thin film to increase the specific capacitance of aluminum electrolytic capacitor , 2008 .

[9]  Jian Wang,et al.  Ba0.5Sr0.5)TiO3 modification on etched aluminum foil for electrolytic capacitor , 2008 .

[10]  Youlong Xu,et al.  Formation of Al2O3–BaTiO3 nanocomposite oxide films on etched aluminum foil by sol–gel coating and anodizing , 2008 .

[11]  Liqiu Wang,et al.  Wet routes of high purity BaTiO3 nanopowders , 2007 .

[12]  M. Sakairi,et al.  Dielectric properties of Al–Si composite oxide films formed on electropolished and DC-etched aluminum by electrophoretic sol-gel coating and anodizing , 2007 .

[13]  Jin-Ju Chen,et al.  The effect of anodizing voltage on the electrical properties of Al–Ti composite oxide film on aluminum , 2006 .

[14]  Zhesheng Feng,et al.  Al2O3-TiO2 composite oxide films on etched aluminum foil by hydrolysis precipitation and anodizing , 2006 .

[15]  Yang Bangchao.  Effect of Technological Parameters on Specific Capacitance of Al-Ti Composite Oxide Films , 2005 .

[16]  Byong-Taek Lee,et al.  Anodizing Properties of High Dielectric Oxide Films Coated on Aluminum by Sol-Gel Method , 2004 .

[17]  Jeng‐Kuei Chang,et al.  Effect of heat-treatment on characteristics of anodized aluminum oxide formed in ammonium adipate solution , 2004 .

[18]  G. Bruni,et al.  Effect of mechanical milling on solid state formation of BaTiO3 from BaCO3–TiO2 (rutile) mixtures , 2001 .

[19]  Keiji Watanabe,et al.  Formation of Al–Zr composite oxide films on aluminum by sol–gel coating and anodizing ☆ , 1999 .

[20]  Hideaki Takahashi,et al.  Formation of Al/(Ti, Nb, Ta)‐Composite Oxide Films on Aluminum by Pore Filling , 1997 .

[21]  K. Wada,et al.  Alkaline Corrosion Resistance of Aluminum Anodic Oxide Film Coated with Zirconium Oxide by a Sol-Gel Process , 1995 .

[22]  Hideaki Takahashi,et al.  Electron Microscopic Study of Anodic Oxide Films Formed on Aluminum with Thermal Oxidation , 1991 .

[23]  K. Kobayashi,et al.  Influence of γ‐Alumina on the Structure of Barrier Anodic Oxide Films on Aluminum , 1988 .

[24]  R. S. Alwitt,et al.  Cross-sections of hydrous and composite aluminum oxide films , 1978 .