Cohesive zone modeling and calibration for mode I tearing of large ductile plates

[1]  Michael D. Shields,et al.  Simulations of Ductile Fracture in an Idealized Ship Grounding Scenario Using Phenomenological Damage and Cohesive Zone Models , 2013 .

[2]  K. L. Nielsen,et al.  Observations on Mode I ductile tearing in sheet metals , 2013 .

[3]  Nuno Dourado,et al.  Cohesive zone model and quasibrittle failure of wood: a new light on the adapted specimen geometries for fracture tests. , 2013 .

[4]  Robert S. Dow,et al.  Simulation of ship grounding damage using the finite element method , 2013 .

[5]  Pawel Woelke,et al.  Modeling fracture in large scale shell structures , 2012 .

[6]  K. L. Nielsen,et al.  Cohesive traction–separation laws for tearing of ductile metal plates , 2012 .

[7]  K. Ravi-Chandar,et al.  Ductile failure behavior of polycrystalline Al 6061-T6 , 2012, International Journal of Fracture.

[8]  N. Abboud,et al.  Stress resultant based elasto-viscoplastic thick shell model , 2012 .

[9]  G. Voyiadjis,et al.  Analysis of shear flexible layered isotropic and composite shells by 'EPSA' , 2012 .

[10]  John W. Hutchinson,et al.  Calibration procedures for a computational model of ductile fracture , 2010, Engineering Fracture Mechanics.

[11]  Tomasz Łodygowski,et al.  The Numerical Analysis of the Intrinsic Anisotropic Microdamage Evolution in Elasto-Viscoplastic Solids , 2009 .

[12]  Marie Lützen,et al.  A simplified grounding damage prediction method and its application in modern damage stability requirements , 2009 .

[13]  George Z. Voyiadjis,et al.  Elasto-Plastic and Damage Analysis of Plates and Shells , 2008 .

[14]  J. Hutchinson,et al.  Modification of the Gurson Model for shear failure , 2008 .

[15]  P. Perzyna,et al.  Elasto‐plastic finite element analysis of shells with damage due to microvoids , 2006 .

[16]  M. Anvari,et al.  Simulation of dynamic ductile crack growth using strain-rate and triaxiality-dependent cohesive elements , 2006 .

[17]  Wolfgang Brocks,et al.  Cohesive elements for thin-walled structures , 2006 .

[18]  George Z. Voyiadjis,et al.  General non-linear finite element analysis of thick plates and shells , 2006 .

[19]  Thomas Pardoen,et al.  Mode I fracture of sheet metal , 2004 .

[20]  Bo Cerup Simonsen,et al.  Experimental and numerical modelling of ductile crack propagation in large-scale shell structures , 2004 .

[21]  Thomas Siegmund,et al.  An analysis of crack growth in thin-sheet metal via a cohesive zone model , 2002 .

[22]  Viggo Tvergaard,et al.  Two mechanisms of ductile fracture: void by void growth versus multiple void interaction , 2002 .

[23]  Xiaopeng Xu,et al.  Numerical simulations of fast crack growth in brittle solids , 1994 .

[24]  J. Hutchinson,et al.  The relation between crack growth resistance and fracture process parameters in elastic-plastic solids , 1992 .

[25]  A. Needleman.  An analysis of decohesion along an imperfect interface , 1990 .

[26]  G. Rousselier,et al.  Ductile fracture models and their potential in local approach of fracture , 1987 .

[27]  A. Needleman.  A Continuum Model for Void Nucleation by Inclusion Debonding , 1987 .

[28]  P. Perzyna.  Constitutive Modeling of Dissipative Solids for Postcritical Behavior and Fracture , 1984 .

[29]  V. Tvergaard.  On localization in ductile materials containing spherical voids , 1982, International Journal of Fracture.

[30]  V. Tvergaard.  Influence of voids on shear band instabilities under plane strain conditions , 1981 .

[31]  A finite difference variational method for bending of plates , 1980 .

[32]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[33]  M. F. Kanninen,et al.  Inelastic Behavior of Solids , 1970, Science.

[34]  G. Irwin.  ANALYSIS OF STRESS AND STRAINS NEAR THE END OF A CRACK TRAVERSING A PLATE , 1957 .