Model Predictive Control with Reduced Integration Step Size for Continuous Control of an IPM Motor

This paper presents an approach to continuous control set model predictive control, which uses reduced integration step size. The reduced integration step size allows to obtain a stream of finite control set, which can be filtered in order to obtain continuous control set. The Sinc-filter can be used to obtain improved accuracy of the voltage references. This approach is suitable for the motors with the high nonlinearity of the magnetization curve, which can be taken into account. The simulation results are presented in case of interior permanent magnet motor.

[1]  Zhixun Ma,et al.  Continuous set nonlinear model predictive control for PMSM drives , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[2]  Brian Pisani.  Digital Filter Types in Delta-Sigma ADCs , 2018 .

[3]  Pericle Zanchetta,et al.  FPGA Implementation of a Novel Oversampling Deadbeat Controller for PMSM Drives , 2019, IEEE Transactions on Industrial Electronics.

[4]  Marco Rivera,et al.  Model Predictive Control for Power Converters and Drives: Advances and Trends , 2017, IEEE Transactions on Industrial Electronics.

[5]  Toshihiko Noguchi,et al.  A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor , 1986, IEEE Transactions on Industry Applications.

[6]  Abdelsalam A. Ahmed,et al.  Torque Control of Induction Motors with Minimal Ripples Based on Continuous Control Set-MPC in a Wide Speed Range , 2017, 2017 IEEE Vehicle Power and Propulsion Conference (VPPC).

[7]  Marian P. Kazmierkowski,et al.  State of the Art of Finite Control Set Model Predictive Control in Power Electronics , 2013, IEEE Transactions on Industrial Informatics.

[8]  S. Bolognani,et al.  Comparison of direct and PWM model predictive control for power electronic and drive systems , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[9]  Alecksey Anuchin,et al.  Accuracy analysis of shunt current sensing by means of delta-sigma modulation in electric drives , 2018, 2018 17th International Ural Conference on AC Electric Drives (ACED).

[10]  Mihai Ciobotaru,et al.  Model predictive control for DC-DC boost converters with constant switching frequency , 2016, 2016 IEEE 2nd Annual Southern Power Electronics Conference (SPEC).

[11]  Alecksey Anuchin,et al.  Current Control of AC Drives Using Shunt Current Sensors and Delta-Sigma Modulation , 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society.

[12]  Toshihiko Noguchi,et al.  Take a look back upon the past decade of direct torque control [of induction motors] , 1997, Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066).