CFD analysis for H-rotor Darrieus turbine as a low speed wind energy converter

Abstract Vertical axis wind turbines like the Darrieus turbine appear to be promising for the conditions of low wind speed, but suffer from a low efficiency compared to horizontal axis turbines. A fully detailed numerical analysis is introduced in this work to improve the global performance of this wind turbine. A comparison between ANSYS Workbench and Gambit meshing tools for the numerical modeling is performed to summarize a final numerical sequence for the Darrieus rotor performance. Then, this model sequence is applied for different blade airfoils to obtain the best performance. Unsteady simulations performed for different speed ratios and based on URANS turbulent calculations using sliding mesh approach. Results show that the accuracy of ANSYS Workbench meshing is improved by using SST K-omega model but it is not recommended for other turbulence models. Moreover, this CFD procedure is used in this paper to assess the turbine performance with different airfoil shapes (25 airfoils). The results introduced new shapes for this turbine with higher efficiency than the regular airfoils by 10%. In addition, blade pitch angle has been studied and the results indicated that the zero pitch angle gives best performance.

[1]  Fernando L. Ponta,et al.  On the aerodynamics of variable-geometry oval-trajectory Darrieus wind turbines , 2007 .

[2]  M. H. Mohamed.  Aero-acoustics noise evaluation of H-rotor Darrieus wind turbines , 2014 .

[3]  Patrick James,et al.  Urban energy generation: Influence of micro-wind turbine output on electricity consumption in buildings , 2007 .

[4]  Vimal Kumar,et al.  Low Reynolds Number Vertical Axis Wind Turbine for Mars , 2010 .

[5]  Payam Sabaeifard,et al.  Determination of Vertical Axis Wind Turbines Optimal Configuration through CFD Simulations , 2012 .

[6]  Gábor Janiga,et al.  Optimal blade shape of a modified Savonius turbine using an obstacle shielding the returning blade , 2011 .

[7]  Ernesto Benini,et al.  The Darrieus wind turbine: Proposal for a new performance prediction model based on CFD , 2011 .

[8]  H. Bijl,et al.  Simulating Dynamic Stall in a 2D VAWT: Modeling strategy, verification and validation with Particle Image Velocimetry data , 2007 .

[9]  Weiyong Chen,et al.  Application of numercal simulation to obtain the optimization pitch angle for VAWT , 2009, 2009 World Non-Grid-Connected Wind Power and Energy Conference.

[10]  I. Paraschivoiu.  Wind turbine design with emphasis on Darrieus concept [ressource électronique] / Ion Paraschivoiu , 2002 .

[11]  Ning Qin,et al.  Wind tunnel and numerical study of a small vertical axis wind turbine , 2008 .

[12]  A. Sakout,et al.  Simulations of the Fluid Flow around a Rotating Vertical Axis Wind Turbine , 2007 .

[13]  G.A.M. van Kuik,et al.  Wind Energy in the Built Environment , 2005 .

[14]  S Wang,et al.  Notice of RetractionNumerical investigations on dynamic stall associated with low Reynolds number flows over airfoils , 2010, 2010 2nd International Conference on Computer Engineering and Technology.

[15]  M. H. Mohamed.  Impacts of solidity and hybrid system in small wind turbines performance , 2013 .

[16]  Ernesto Benini,et al.  Modeling Strategy and Numerical Validation for a Darrieus Vertical Axis Micro-Wind Turbine , 2010 .

[17]  M. H. Mohamed,et al.  Performance investigation of H-rotor Darrieus turbine with new airfoil shapes , 2012 .

[18]  Ernesto Benini,et al.  Effect of Blade Inclination Angle on a Darrieus Wind Turbine , 2012 .