Process Flow-Sheet Synthesis: Systems-Level Design applied to Synthetic Crude Production

Abstract This paper showcases a novel approach for designing concepts for process flow-sheets at the “systems-level”. A graphical technique, called the “GH-space”, is used to analyze the flows of heat and work within a process to provide insight into the interactions of various process units within the process. Any unit process, which interacts with the surroundings by transferring heat and work, can be represented as a vector on the GH-space. By manipulating these vectors, a process can be designed to meet certain design criteria or constraints. While material and energy balances are normally performed on a flowsheet, this vectored approach allows the material and energy balances to be used to construct a flowsheet. This paper focuses on the design of a flow-sheet for the production of synthetic crude oil by way of Fischer-Tropsch hydrocarbons. It was shown that a process could be designed that not only produced the desired product but could also be thermodynamically reversible and carbon neutral. The goal of this work is not to present a final optimized design but rather to call attention to the possibilities that could lead to potential solutions to the most challenging problems facing the newest generation of design engineers. Perhaps the greatest strength of the GH-space technique is that it tends towards the “best” thermodynamic solution. It may not be possible to achieve this best solution, in a practical sense, but it is invaluable in providing a basis for comparison.

[1]  Christodoulos A. Floudas,et al.  Deterministic global optimization in isothermal reactor network synthesis , 2002, J. Glob. Optim..

[2]  L. Biegler,et al.  Convex attainable region projections for reactor network synthesis , 2000 .

[3]  Ignacio E. Grossmann,et al.  Simultaneous synthesis of distillation sequences in overall process schemes using an improved minlp approach , 1996 .

[4]  Mauro A.S.S. Ravagnani,et al.  Heat exchanger network synthesis and optimisation using genetic algorithm , 2005 .

[5]  Diane Hildebrandt,et al.  A graphical approach to process synthesis and its application to steam reforming , 2013 .

[6]  David L. Trimm,et al.  Coke formation and minimisation during steam reforming reactions , 1997 .

[7]  Corinne Le Quéré,et al.  Trends in the sources and sinks of carbon dioxide , 2009 .

[8]  R. L. Motard,et al.  Procedures for the initial design of chemical processing systems , 1977 .

[9]  Arthur Westerberg,et al.  A retrospective on design and process synthesis , 2004, Comput. Chem. Eng..

[10]  A. Brent,et al.  A review of carbon dioxide capture and sequestration and the Kyoto Protocol's clean development mechanism and prospects for Southern Africa , 2017 .

[11]  D. Glasser,et al.  A New Way to Look at Fischer−Tropsch Synthesis Using Flushing Experiments , 2011 .

[12]  Kenneth A. Williams,et al.  Methane catalytic partial oxidation on autothermal Rh and Pt foam catalysts: Oxidation and reforming zones, transport effects, and approach to thermodynamic equilibrium , 2007 .

[13]  Enrique Iglesia,et al.  Design, synthesis, and use of cobalt-based Fischer-Tropsch synthesis catalysts , 1997 .

[14]  Rafiqul Gani,et al.  Process synthesis, design and analysis using a process-group contribution method , 2015, Comput. Chem. Eng..

[15]  Brendon Hausberger,et al.  Systems approach to reducing energy usage and carbon dioxide emissions , 2009 .

[16]  Yaquan Wang,et al.  Thermodynamic analysis of autothermal steam and CO2 reforming of methane , 2008 .

[17]  Ignacio E. Grossmann,et al.  Improved optimization strategies for automated heat exchanger network synthesis through physical insights , 1990 .

[18]  Brendon Hausberger,et al.  Process flow sheet synthesis: Reaching targets for idealized coal gasification , 2014 .

[19]  O. Terasaki,et al.  Microstructural Optimization of a Zeolite Membrane for Organic Vapor Separation , 2003, Science.

[20]  C. Satterfield,et al.  Product distributions of the Fischer-Tropsch synthesis on precipitated iron catalysts , 1989 .

[21]  B. Rong On the synthesis of multicomponent distillation configurations with nonsharp splits , 2013 .

[22]  Rachid Chebbi,et al.  Chemical reactors sequencing , 2014, Comput. Appl. Eng. Educ..

[23]  Günter Wozny,et al.  Optimal Operation of a Membrane Reactor Network , 2012 .

[24]  Malcolm L. H. Green,et al.  Brief Overview of the Partial Oxidation of Methane to Synthesis Gas , 2003 .

[25]  Baraka Celestin Sempuga,et al.  Classification of Chemical Processes: A Graphical Approach to Process Synthesis To Improve Reactive Process Work Efficiency , 2010 .

[26]  G. Schaub,et al.  Fischer−Tropsch Synfuels from Biomass: Maximizing Carbon Efficiency and Hydrocarbon Yield , 2010 .

[27]  Yasuyuki Ishida,et al.  Production of hydrocarbons in Fischer–Tropsch synthesis with Fe-based catalyst: Investigations of primary kerosene yield and carbon mass balance , 2010 .