Reliability-Based Decision Support Tool for Life Cycle Design and Management of Highway Bridge Decks

A considerable percentage of highway bridges in North America is in a structurally/functionally deficient state due to aging, aggressive environment and increased traffic load and volume. Reliable predictions of life cycle performance are critical to the optimization of their design and maintenance that will lead to reduced risks of failure and life cycle costs. This paper provides an overview of the reliability-based life cycle performance and life cycle cost analysis models developed at NRC-IRC. These models can be used to predict the service life and cost of highway bridge decks built in corrosive environments. The service life prediction models predict the time dependent probability of damage initiation and accumulation in bridge decks, from chloride ingress to spalling and/or delamination of the concrete cover. The life cycle cost analysis model provides predictions of the total costs incurred over the life cycles of bridge decks, which include the costs of design, construction, maintenance and repair activities, as well as user costs. These models have been integrated into a decision support software tool called "SLAB-D". This tool can be used to help bridge designers and managers quantify and visualize how changes to the bridge deck design and maintenance will affect its service life and life cycle cost.

[1]  L. Nilsson,et al.  Chloride diffusivity in high strength concrete at different ages , 1992 .

[2]  Paul Gutoskie,et al.  ROAD SAFETY IN CANADA , 2001 .

[3]  Stephen P. Timoshenko,et al.  Strength of Materials. , 1931, Nature.

[4]  Ki Yong Ann,et al.  Chloride threshold level for corrosion of steel in concrete , 2007 .

[5]  K Babaei,et al.  Performance of Rehabilitated/Protected Concrete Bridge Decks , 1992 .

[6]  L Daigle,et al.  Life cycle cost analysis of high performance concrete bridges considering their environmental impacts , 2006 .

[7]  B. T. Molloy,et al.  Prediction of long term chloride concentration in concrete , 1994 .

[8]  Harold E. Marshall,et al.  The economics of new-technology materials:: a case study of FRP bridge decking , 1996 .

[9]  G Wilson,et al.  GUIDE TO BENEFIT-COST ANALYSIS IN TRANSPORT CANADA , 1994 .

[10]  Richard E. Weyers,et al.  CONCRETE BRIDGE PROTECTION AND REHABILITATION: CHEMICAL AND PHYSICAL TECHNIQUES. SERVICE LIFE ESTIMATES , 1993 .

[11]  Zdenek P. Bazant,et al.  PHYSICAL MODEL FOR STEEL CORROSION IN CONCRETE SEA STRUCTURES­ THEORY , 1979 .

[12]  Samer Madanat,et al.  OPTIMAL REHABILITATION TIMES FOR CONCRETE BRIDGE DECKS , 1993 .

[13]  J Walls,et al.  Life-Cycle Cost Analysis in Pavement Design — Interim Technical Bulletin , 1998 .

[14]  John Crank,et al.  The Mathematics Of Diffusion , 1956 .

[15]  Hugh Hawk,et al.  Bridge Life-cycle Cost Analysis , 2003 .

[16]  Carmen Andrade,et al.  On-site measurements of corrosion rate of reinforcements , 2001 .

[17]  K. Tuutti.  Corrosion of steel in concrete , 1982 .

[18]  Osama Hunaidi,et al.  DECISION SUPPORT TOOLS FOR LIFE PREDICTION AND REHABILITATION OF CONCRETE BRIDGE DECKS , 2001 .

[19]  M Maage,et al.  SERVICE LIFE PREDICTION OF EXISTING CONCRETE STRUCTURES EXPOSED TO MARINE ENVIRONMENT , 1996 .