Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium–sulfur batteries
暂无分享,去创建一个
Yong Huang | Jinhua Sun | Yong Huang | Jinhuan Sun | J. Geng | Guoxing Li | Wenpeng Hou | Shi-dong Jiang | Guoxing Li | Jianxin Geng | Wenpeng Hou | Shidong Jiang
[1] Yang-Kook Sun,et al. Challenges facing lithium batteries and electrical double-layer capacitors. , 2012, Angewandte Chemie.
[2] Shaogang Wang,et al. A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries , 2014, Advanced materials.
[3] Yang Liu,et al. A highly ordered meso@microporous carbon-supported sulfur@smaller sulfur core-shell structured cathode for Li-S batteries. , 2014, ACS nano.
[4] Weidong Zhou,et al. Amylopectin wrapped graphene oxide/sulfur for improved cyclability of lithium-sulfur battery. , 2013, ACS nano.
[5] Yunhui Huang,et al. Macroporous free-standing nano-sulfur/reduced graphene oxide paper as stable cathode for lithium-sulfur battery , 2015 .
[6] Junhe Yang,et al. High Performance C/S Composite Cathodes with Conventional Carbonate-Based Electrolytes in Li-S Battery , 2014, Scientific Reports.
[7] X. Lou,et al. Glucose-Assisted One-Pot Synthesis of FeOOH Nanorods and Their Transformation to Fe3O4@Carbon Nanorods for Application in Lithium Ion Batteries , 2011 .
[8] Guochun Li,et al. Sulfur/polyacrylonitrile/carbon multi-composites as cathode materials for lithium/sulfur battery in the concentrated electrolyte , 2014 .
[9] Li-Jun Wan,et al. Encapsulation of Sulfur in a Hollow Porous Carbon Substrate for Superior Li‐S Batteries with Long Lifespan , 2013 .
[10] Jou-Hyeon Ahn,et al. Improvement of cycle property of sulfur electrode for lithium/sulfur battery , 2008 .
[11] Chunsheng Wang,et al. Sulfur-impregnated disordered carbon nanotubes cathode for lithium-sulfur batteries. , 2011, Nano letters.
[12] L. Archer,et al. Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries. , 2011, Angewandte Chemie.
[13] Yong Huang,et al. Fluorine-Doped SnO2@Graphene Porous Composite for High Capacity Lithium-Ion Batteries , 2015 .
[14] Yaqin Huang,et al. Improve Rate Capability of the Sulfur Cathode Using a Gelatin Binder , 2011 .
[15] Xueping Gao,et al. A Polyaniline‐Coated Sulfur/Carbon Composite with an Enhanced High‐Rate Capability as a Cathode Material for Lithium/Sulfur Batteries , 2012 .
[16] Feng Li,et al. A microporous-mesoporous carbon with graphitic structure for a high-rate stable sulfur cathode in carbonate solvent-based Li-S batteries. , 2012, Physical chemistry chemical physics : PCCP.
[17] Xiao Liang,et al. A highly efficient polysulfide mediator for lithium–sulfur batteries , 2015, Nature Communications.
[18] Changhong Wang,et al. Monodispersed sulfur nanoparticles for lithium-sulfur batteries with theoretical performance. , 2015, Nano letters.
[19] Guangyuan Zheng,et al. Sulphur–TiO2 yolk–shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteries , 2013, Nature Communications.
[20] Jean-Marie Tarascon,et al. Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.
[21] Sang-Cheol Han,et al. Effect of Multiwalled Carbon Nanotubes on Electrochemical Properties of Lithium/Sulfur Rechargeable Batteries , 2003 .
[22] Emanuel Peled,et al. Lithium Sulfur Battery Oxidation/Reduction Mechanisms of Polysulfides in THF Solutions , 1988 .
[23] X. Lou,et al. Confining sulfur in double-shelled hollow carbon spheres for lithium-sulfur batteries. , 2012, Angewandte Chemie.
[24] M. Buchmeiser,et al. Structure-Related Electrochemistry of Sulfur-Poly(acrylonitrile) Composite Cathode Materials for Rechargeable Lithium Batteries , 2011 .
[25] Hong‐Jie Peng,et al. Hierarchical Vine‐Tree‐Like Carbon Nanotube Architectures: In‐Situ CVD Self‐Assembly and Their Use as Robust Scaffolds for Lithium‐Sulfur Batteries , 2014, Advanced materials.
[26] Li-Jun Wan,et al. A High‐Energy Room‐Temperature Sodium‐Sulfur Battery , 2014, Advanced materials.
[27] Lei Wang,et al. Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells , 2011 .
[28] Jeong Jae Wie,et al. The use of elemental sulfur as an alternative feedstock for polymeric materials. , 2013, Nature chemistry.
[29] Arumugam Manthiram,et al. Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer , 2012, Nature Communications.
[30] L. Nazar,et al. High “C” rate Li-S cathodes: sulfur imbibed bimodal porous carbons , 2011 .
[31] Y. Li,et al. Stable-cycle and high-capacity conductive sulfur-containing cathode materials for rechargeable lithium batteries , 2005 .
[32] Zhiwei Zhang,et al. 3D Interconnected Porous Carbon Aerogels as Sulfur Immobilizers for Sulfur Impregnation for Lithium‐Sulfur Batteries with High Rate Capability and Cycling Stability , 2014 .
[33] C. Shi,et al. Graphene networks anchored with sn@graphene as lithium ion battery anode. , 2014, ACS nano.
[34] H. Dai,et al. Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur battery cathode material with high capacity and cycling stability. , 2011, Nano letters.
[35] Min-Kyu Song,et al. A long-life, high-rate lithium/sulfur cell: a multifaceted approach to enhancing cell performance. , 2013, Nano letters.
[36] Shubin Yang,et al. Vertically aligned sulfur-graphene nanowalls on substrates for ultrafast lithium-sulfur batteries. , 2015, Nano letters.
[37] Zhichuan J. Xu,et al. Encapsulating MWNTs into Hollow Porous Carbon Nanotubes: A Tube‐in‐Tube Carbon Nanostructure for High‐Performance Lithium‐Sulfur Batteries , 2014, Advanced materials.
[38] Qiang Zhang,et al. Entrapment of sulfur in hierarchical porous graphene for lithium-sulfur batteries with high rate per , 2013 .
[39] L. Nazar,et al. Graphene-enveloped sulfur in a one pot reaction: a cathode with good coulombic efficiency and high practical sulfur content. , 2012, Chemical communications.
[40] S. Ye,et al. Sulfur/activated-conductive carbon black composites as cathode materials for lithium/sulfur battery , 2013 .
[41] Lin Gu,et al. Smaller sulfur molecules promise better lithium-sulfur batteries. , 2012, Journal of the American Chemical Society.
[42] Jun Lu,et al. Strong lithium polysulfide chemisorption on electroactive sites of nitrogen-doped carbon composites for high-performance lithium-sulfur battery cathodes. , 2015, Angewandte Chemie.
[43] Shuru Chen,et al. Ordered mesoporous carbon/sulfur nanocomposite of high performances as cathode for lithium–sulfur battery , 2011 .
[44] L. Nazar,et al. A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries. , 2009, Nature materials.
[45] L. Nazar,et al. Spherical ordered mesoporous carbon nanoparticles with high porosity for lithium-sulfur batteries. , 2012, Angewandte Chemie.
[46] X. Lou,et al. Enhancing lithium–sulphur battery performance by strongly binding the discharge products on amino-functionalized reduced graphene oxide , 2014, Nature Communications.
[47] Hong‐Jie Peng,et al. Unstacked double-layer templated graphene for high-rate lithium–sulphur batteries , 2014, Nature Communications.
[48] Hal-Bon Gu,et al. Electrochemical properties of lithium–sulfur batteries , 2003 .
[49] Jinghua Guo,et al. Graphene oxide as a sulfur immobilizer in high performance lithium/sulfur cells. , 2011, Journal of the American Chemical Society.
[50] K. Char,et al. Kilogram scale inverse vulcanization of elemental sulfur to prepare high capacity polymer electrodes for Li‐S batteries , 2015 .
[51] Shengdi Zhang. Role of LiNO3 in rechargeable lithium/sulfur battery , 2012 .
[52] Xueping Gao,et al. Enhancement of long stability of sulfur cathode by encapsulating sulfur into micropores of carbon spheres , 2010 .
[53] S. Surampudi,et al. Electrochemical Impedance Spectroscopy of Lithium‐Titanium Disulfide Rechargeable Cells , 1993 .
[54] Guangyuan Zheng,et al. Hollow carbon nanofiber-encapsulated sulfur cathodes for high specific capacity rechargeable lithium batteries. , 2011, Nano letters.
[55] Jie Liu,et al. Significantly improved long-cycle stability in high-rate Li-S batteries enabled by coaxial graphene wrapping over sulfur-coated carbon nanofibers. , 2013, Nano letters.
[56] Yu-Guo Guo,et al. Tuning the porous structure of carbon hosts for loading sulfur toward long lifespan cathode materials for Li–S batteries , 2013 .
[57] C. Liang,et al. Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery , 2009 .
[58] A. Manthiram,et al. Challenges and prospects of lithium-sulfur batteries. , 2013, Accounts of chemical research.
[59] Yunhui Huang,et al. Slurryless Li2S/reduced graphene oxide cathode paper for high-performance lithium sulfur battery. , 2015, Nano letters.
[60] Shengbo Zhang. New insight into liquid electrolyte of rechargeable lithium/sulfur battery , 2013 .
[61] Li Li,et al. Graphene-based three-dimensional hierarchical sandwich-type architecture for high-performance Li/S batteries. , 2013, Nano letters.
[62] R. Steudel. Mechanism for the formation of elemental sulfur from aqueous sulfide in chemical and microbiological desulfurization processes , 1996 .
[63] Byung Gon Kim,et al. A Lithium‐Sulfur Battery with a High Areal Energy Density , 2014 .
[64] L. Nazar,et al. New approaches for high energy density lithium-sulfur battery cathodes. , 2013, Accounts of chemical research.
[65] L. Ionov,et al. Nanoporous Cathodes for High-Energy Li-S Batteries from Gyroid Block Copolymer Templates. , 2015, ACS nano.
[66] Shengbo Zhang,et al. Effect of Discharge Cutoff Voltage on Reversibility of Lithium/Sulfur Batteries with LiNO3-Contained Electrolyte , 2012 .
[67] A. Manthiram,et al. Hydroxylated Graphene–Sulfur Nanocomposites for High‐Rate Lithium–Sulfur Batteries , 2013 .
[68] E. Peled,et al. Lithium‐Sulfur Battery: Evaluation of Dioxolane‐Based Electrolytes , 1989 .
[69] Yingchao Yu,et al. Yolk-shell structure of polyaniline-coated sulfur for lithium-sulfur batteries. , 2013, Journal of the American Chemical Society.