A method for Estimating the Degree of Uncertainty With Respect to Life Cycle Assessment During Design

Life cycle assessment (LCA) is used to estimate a product's environmental impact. Using LCA during the earlier stages of design may produce erroneous results since information available on the product's lifecycle is typically incomplete at these stages. The resulting uncertainty must be accounted for in the decision-making process. This paper proposes a method for estimating the environmental impact of a product's life cycle and the associated degree of uncertainty of that impact using information generated during the design process. Total impact is estimated based on aggregation of individual product life cycle processes impacts. Uncertainty estimation is based on assessing the mismatch between the information required and the information available about the product life cycle in each uncertainty category, as well as their integration. The method is evaluated using pre-defined scenarios with varying uncertainty. DOI: 10.1115/1.4002163]

[1]  Srikanth Devanathan,et al.  Integration of Sustainability Into Early Design Through the Function Impact Matrix , 2010 .

[2]  G. Brundtland,et al.  Our common future , 1987 .

[3]  N. F. M. Roozenburg,et al.  Product design: Fundamentals and methods , 1996 .

[4]  Stefanie Hellweg,et al.  Using Standard Statistics to Consider Uncertainty in Industry-Based Life Cycle Inventory Databases (7 pp) , 2005 .

[5]  R. Frischknecht,et al.  Representing Statistical Distributions for Uncertain Parameters in LCA. Relationships between mathematical forms, their representation in EcoSpold, and their representation in CMLCA (7 pp) , 2005 .

[6]  Steven R. Harper,et al.  Incorporating Environmental Impacts in Strategic Redesign of an Engineered System , 2008 .

[7]  Andreas Ciroth,et al.  Geographical and technological differences in life cycle inventories shown by the use of process models for waste incinerators part I. technological and geographical differences , 2002 .

[8]  David J. Brennan,et al.  Application of data quality assessment methods to an LCA of electricity generation , 2003 .

[9]  Enrico Benetto,et al.  Fuzzy-Sets Approach to Noise Impact Assessment (7 pp) , 2006 .

[10]  Sebastian Leibrecht,et al.  Fundamental Principles for CAD-based Ecological Assessments (9 pp) , 2005 .

[11]  William Mendenhall,et al.  Introduction to Probability and Statistics , 1961, The Mathematical Gazette.

[12]  Amaresh Chakrabarti,et al.  Identification and application of requirements and their impact on the design process: a protocol study , 2004 .

[13]  P. Billingsley,et al.  Probability and Measure , 1980 .

[14]  Scott Duncan,et al.  A survey of unresolved problems in life cycle assessment , 2008 .

[15]  David Evans,et al.  How LCA studies deal with uncertainty , 2002 .

[16]  Bengt Steen,et al.  On uncertainty and sensitivity of LCA-based priority setting , 1997 .

[17]  Anna Björklund,et al.  Survey of approaches to improve reliability in lca , 2002 .

[18]  Amaresh Chakrabarti,et al.  A Method for Evaluation of Product Lifecycle Alternatives under Uncertainty , 2009 .

[19]  Douglas C. Montgomery,et al.  Data quality , 1996 .

[20]  Enrico Benetto,et al.  Fuzzy-Sets Approach to Noise Impact Assessment , .

[21]  Stefanie Hellweg,et al.  Uncertainty Analysis in Life Cycle Assessment (LCA): Case Study on Plant-Protection Products and Implications for Decision Making (9 pp + 3 pp) , 2005 .

[22]  Glenn Shafer,et al.  A Mathematical Theory of Evidence , 2020, A Mathematical Theory of Evidence.

[23]  W. J. DeCoursey,et al.  Introduction: Probability and Statistics , 2003 .

[24]  Andreas Ciroth.  Uncertainties in life cycle assessment , 2004 .

[25]  Andreas Ciroth,et al.  Uncertainty calculation in life cycle assessments , 2004 .

[26]  Mark A. J. Huijbregts,et al.  Framework for modelling data uncertainty in life cycle inventories , 2001 .

[27]  C. Dujet,et al.  Possibility Theory: A New Approach to Uncertainty Analysis? (3 pp) , 2006 .

[28]  Ming-Lung Hung,et al.  Quantifying system uncertainty of life cycle assessment based on Monte Carlo simulation , 2008 .

[29]  K. Hungerbühler,et al.  Uncertainty Analysis in Life Cycle Assessment (LCA): Case Study on Plant - Protection Products and Implications for Decision Making (3 pp) , 2005 .

[30]  Amaresh Chakrabarti,et al.  Understanding the needs of designers for developing environmental friendly products , 2009 .

[31]  Wim Dewulf,et al.  Eco-pas - estimating the environmental performance of conceptual designs using parametric modelling , 2003 .

[32]  J. Browne,et al.  The development of a CAD integrated DFE Workbench software tool , 2001, Proceedings Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing.

[33]  K. Fichter,et al.  World Business Council for Sustainable Development - WBCSD , 1998 .

[34]  Andreas Ciroth,et al.  Geographical and technological differences in Life Cycle Inventories shown by the use of process models for waste incinerators , 2002 .