Investigation into eddy current pulsed thermography for rolling contact fatigue detection and characterization

Abstract This paper reports on the use of eddy current pulsed thermography (ECPT) for detection and characterization of rolling contact fatigue (RCF). Detection mechanisms with eddy currents and heat propagation effects were discussed with RCF modeled as a simple angled defect. Two different angled defects were studied through numerical simulations and experimentally by using uniform magnetic field (UMF) excited by Helmholtz coils. Finally, a rail sample with RCF defects was inspected using UMF excitation. It is shown that ECPT with UMF excitation provides an efficient and robust method to detect angled defects, compared with nonuniform magnetic field (NUMF) excitation.

[1]  Beate Oswald-Tranta,et al.  Localizing surface cracks with inductive thermographical inspection: from measurement to image processing , 2011 .

[2]  Udo Netzelmann,et al.  Induction Thermography as a Tool for Reliable Detection of Surface Defects in Forged Components , 2008 .

[3]  Leon M. Keer,et al.  The effect of service loading on shell growth in rails , 1987 .

[4]  Louis Hennet,et al.  Aerodynamic Levitation and Inductive Heating – A New Concept for Structural Investigations of Undercooled Melts , 2005 .

[5]  Gui Yun Tian,et al.  Quantitative evaluation of angular defects by pulsed eddy current thermography , 2010 .

[6]  Brian A. Shaw,et al.  Eddy current pulsed thermography for fatigue evaluation of gear , 2014 .

[7]  Clive Roberts,et al.  Ultrasonic detection of surface-breaking railhead defects , 2008 .

[8]  Dixiang Chen,et al.  An investigation into eddy current pulsed thermography for detection of corrosion blister , 2014 .

[9]  M Ph Papaelias,et al.  A review on non-destructive evaluation of rails: State-of-the-art and future development , 2008 .

[10]  G. Tian,et al.  Simulation of Edge Cracks Using Pulsed Eddy Current Stimulated Thermography , 2011 .

[11]  Gui Yun Tian,et al.  DEFECT CLASSIFICATION USING A NEW FEATURE FOR PULSED EDDY CURRENT SENSORS , 2005 .

[12]  Norbert Meyendorf,et al.  Surface crack detection in ferritic and austenitic steel components using inductive heated thermography , 2010, 33rd International Spring Seminar on Electronics Technology, ISSE 2010.

[13]  Wai Lok Woo,et al.  Impact Damage Detection and Identification Using Eddy Current Pulsed Thermography Through Integration of PCA and ICA , 2014, IEEE Sensors Journal.

[14]  Gemma Nicholson,et al.  Modelling of the response of an ACFM sensor to rail and rail wheel RCF cracks , 2012 .

[15]  Chen Guoming,et al.  Analysis of the lift-off effect of a U-shaped ACFM system , 2013 .

[16]  W. L. Woo,et al.  Physical interpretation and separation of eddy current pulsed thermography , 2013 .

[17]  Gemma Nicholson,et al.  Modelling and experimental measurements of idealised and light-moderate RCF cracks in rails using an ACFM sensor , 2011 .

[18]  E. Kabo,et al.  Fatigue of railway wheels and rails under rolling contact and thermal loading—an overview , 2005 .

[19]  Paul O'Leary,et al.  Motion deblurring of infrared images from a microbolometer camera , 2010 .

[20]  Stuart L. Grassie,et al.  Rolling contact fatigue on the British railway system: treatment , 2005 .

[21]  Gui Yun Tian,et al.  PEC thermography for imaging multiple cracks from rolling contact fatigue , 2011 .

[22]  Liang Cheng,et al.  State Detection of Bond Wires in IGBT Modules Using Eddy Current Pulsed Thermography , 2014, IEEE Transactions on Power Electronics.

[23]  Gui Yun Tian,et al.  Modelling and evaluation of eddy current stimulated thermography , 2010 .

[24]  Gui Yun Tian,et al.  Pulsed Eddy Current Thermography and Applications , 2011 .

[25]  Liang Cheng,et al.  Transient Thermal Behavior of Eddy-Current Pulsed Thermography for Nondestructive Evaluation of Composites , 2013, IEEE Transactions on Instrumentation and Measurement.

[26]  S. L. Grassie,et al.  Rail defects: an overview , 2003 .