A SYNTHESIS APPROACH FOR RECONFIGURABLE REDUNDANT PARALLEL KINEMATIC MECHANISMS

The design of a variety of novel Parallel Kinematic Mechanisms (PKMs) in the past three decades, and research into redundancy and reconfigurability have presented researchers with an opportunity to...

[1]  Beno Benhabib,et al.  A Multi-Tier Design Methodology for Reconfigurable Milling Machines , 2014 .

[2]  Doina Pisla,et al.  Structural design and kinematics of a new parallel reconfigurable robot , 2013 .

[3]  E. Amezua,et al.  Characterizing the configuration space of the 3-SPS-S spatial orientation parallel manipulator , 2014 .

[4]  Beno Benhabib,et al.  Comparative analysis of a new 3×PPRS parallel kinematic mechanism , 2014 .

[5]  Wei Ye,et al.  A new family of reconfigurable parallel mechanisms with diamond kinematotropic chain , 2014 .

[6]  Frank Chongwoo Park,et al.  Design and analysis of a redundantly actuated parallel mechanism for rapid machining , 2001, IEEE Trans. Robotics Autom..

[7]  Fengfeng Xi,et al.  Reconfiguration Analysis of a Fully Reconfigurable Parallel Robot , 2013 .

[8]  Chun-Ta Chen.  Reconfiguration of a parallel kinematic manipulator for the maximum dynamic load-carrying capacity , 2012 .

[9]  Dan Zhang,et al.  Novel Design and Analysis of a Reconfigurable Parallel Manipulator Using Variable Geometry Approach , 2011 .

[10]  Xianwen Kong,et al.  Type Synthesis of 3-DOF Multi-Mode Translational/Spherical Parallel Mechanisms with Lockable Joints , 2016 .

[11]  Joseph Duffy,et al.  A forward and reverse displacement analysis of a 6-DOF in-parallel manipulator , 1994 .

[12]  J. Dai,et al.  Actuation schemes of a spatial 3-PPRR parallel mechanism , 2012 .

[13]  Moshe Shoham,et al.  Singularity condition of six-degree-of-freedom three-legged parallel robots based on grassmann-cayley algebra , 2006, IEEE Transactions on Robotics.

[14]  Marco Ceccarelli,et al.  A reconfigurable 5-DoF 5-SPU parallel platform , 2009, 2009 ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots.

[15]  Hongliang Qi,et al.  Topological design and genetic synthesis of the variable topology parallel mechanisms , 2009, 2009 ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots.

[16]  David Inkermann,et al.  Dynamic Reconfiguration of Parallel Mechanisms , 2010 .

[17]  Moshe Shoham,et al.  Connectivity in open and closed loop robotic mechanisms , 1997 .

[18]  Daniel Glozman,et al.  Novel 6-DOF parallel manipulator with large workspace , 2009, Robotica.

[19]  Byung-Ju Yi,et al.  Multi-task oriented design of an asymmetric 3T1R type 4-DOF parallel mechanism , 2013 .

[20]  M. Valášek,et al.  Hexasphere—Redundantly Actuated Parallel Spherical Mechanism asa New Concept of Agile Telescope , 2010 .

[21]  L. W. Tsai,et al.  Robot Analysis: The Mechanics of Serial and Parallel Ma-nipulators , 1999 .

[22]  Charles Pinto,et al.  A practical procedure to analyze singular configurations in closed kinematic chains , 2004, IEEE Transactions on Robotics.

[23]  Yuefa Fang,et al.  Structure Synthesis of a Class of 4-DoF and 5-DoF Parallel Manipulators with Identical Limb Structures , 2002, Int. J. Robotics Res..

[24]  Hyung Suck Cho,et al.  Analysis of a Novel 6-DOF, 3-PPSP Parallel Manipulator , 1997, Int. J. Robotics Res..

[25]  Marco Ceccarelli,et al.  Design and Kinematic Analysis of a Novel Metamorphic Mechanism for Lower Limb Rehabilitation , 2016 .

[26]  Wei-Hua Chieng,et al.  Workspace and Dexterity Analyses of the Delta Hexaglide Platform , 2008, J. Robotics Mechatronics.

[27]  Annika Raatz,et al.  Configuration Switching for Workspace Enlargement , 2011, Robotic Systems for Handling and Assembly.

[28]  S. Muruganandam,et al.  Selection of optimal machining parameters for hexapod machine tool , 2010 .

[29]  Tsu-Chin Tsao,et al.  Assessment of a Hexapod Surgical System for Robotic Micro-Macro Manipulations in Ocular Surgery , 2010, Ophthalmic Research.

[30]  Jian S. Dai,et al.  Constraint-Based Limb Synthesis and Mobility-Change-Aimed Mechanism Construction , 2011 .

[31]  Ilian A. Bonev,et al.  Development of a Five-Bar Parallel Robot With Large Workspace , 2010 .

[32]  Grigore Gogu.  Structural synthesis of parallel robots. , 2008 .

[33]  Massimo Callegari,et al.  The Kinematotropic 3-CPU Parallel Robot: Analysis of Mobility and Reconfigurability Aspects , 2012, ARK.

[34]  Raffaele Di Gregorio,et al.  Motion planning for a novel reconfigurable parallel manipulator with lockable revolute joints , 2010, 2010 IEEE International Conference on Robotics and Automation.

[35]  Beno Benhabib,et al.  Mechanical design of a modular robot for industrial applications , 1991 .

[36]  C. Gosselin,et al.  Type Synthesis of Parallel Mechanisms With Multiple Operation Modes , 2007 .