Polarimetric persistent scatterer interferometry (PolPSI) takes advantage of polarimetric optimization algorithms that enhance interferograms’ phase quality by adequately combining the available polarization channels (e.g., HH, VV, HV, and VH) into an improved one. Amplitude dispersion (<inline-formula> <tex-math notation="LaTeX">$D_{A}$ </tex-math></inline-formula>) is one of the commonly used phase quality metrics for this optimization. The resolution of the images is supposed to have an impact on the performance of <inline-formula> <tex-math notation="LaTeX">$D_{A}$ </tex-math></inline-formula>-based PolPSI in terms of both pixel density and quality. In this research, this impact is investigated. Specifically, 30 quad-pol RADARSAT-2 images over Barcelona with a resolution around 5 m in both range and azimuth are employed to generate additional data sets with degraded resolutions, ranging from 7.5 to 20 m. The results confirm that, in all cases, the ability of <inline-formula> <tex-math notation="LaTeX">$D_{A}$ </tex-math></inline-formula> to select high-quality pixels, i.e., persistent scatterers, decreases when the spatial resolution worsens because the loss of resolution increases the number of scatterers present in a resolution cell. In addition, it would be expected that the performance of the polarimetric optimization of <inline-formula> <tex-math notation="LaTeX">$D_{A}$ </tex-math></inline-formula> would tend to decrease when the spatial resolution worsens. However, for all employed resolutions, the polarimetric optimization improves the density and quality of PSs with respect to that of any single polarimetric channel. Moreover, this improvement is more noticeable, in relative terms, as the image resolution degrades.