Sensitivity analysis of a biomass gasification model in fixed bed downdraft reactors: Effect of model and process parameters on reaction front

Abstract A detailed sensitivity analysis is performed on a one-dimensional fixed bed downdraft biomass gasification model. The aim of this work is to analyze how the heat transfer mechanisms and rates are affected as reaction front progresses along the bed with its main reactive stages (drying, pyrolysis, combustion and reduction) under auto-thermal conditions. To this end, a batch type fixed-bed gasifier was simulated and used to study process propagation velocity of biomass gasification. The previously proposed model was validated with experimental data as a function of particle size. The model was capable of predicting coherently the physicochemical processes of gasification allowing an agreement between experimental and calculated data with an average error of 8%. Model sensitivity to parametric changes in several model and process parameters was evaluated by analyzing their effect on heat transfer mechanisms of reaction front (solid–gas, bed–wall and radiative in the solid phase) and key response variables (temperature field, maximum solid and gas temperatures inside the bed, flame front velocity, biomass consumption and fuel/air ratio). The model coefficients analyzed were the solid–gas heat transfer, radiation absorption, bed–wall heat transfer, pyrolysis kinetic rates and reactor-environment heat transfer. On the other hand, particle size, bed void fraction, air intake temperature, gasifying agent composition and gasifier wall material were analyzed as process parameters. The solid–gas heat transfer coefficient (0.02

[1]  Mathew J. Hagge,et al.  Numerical modelling of a fixed bed updraft long stick wood gasifier , 2011 .

[2]  Suzana Yusup,et al.  Mathematical and computational approaches for design of biomass gasification for hydrogen production: A review , 2012 .

[3]  Vida N. Sharifi,et al.  Substoichiometric conversion of biomass and solid wastes to energy in packed beds , 2006 .

[4]  Pinaki Bhattacharya,et al.  Modelling and simulation of an updraft moving bed gasifier using rice husk as a fuel material , 1991 .

[5]  Colomba Di Blasi,et al.  Dynamic behaviour of stratified downdraft gasifiers , 2000 .

[6]  Jim Swithenbank,et al.  Converting moving-grate incineration from combustion to gasification - numerical simulation of the burning characteristics. , 2007, Waste management.

[7]  S. Dasappa,et al.  Gasification of char particles in packed beds: analysis and results , 2001 .

[8]  Changkook Ryu,et al.  Effect of fuel properties on biomass combustion. Part II. Modelling approach—identification of the controlling factors , 2005 .

[9]  B. Leckner,et al.  Sensitivity Analysis of a Fixed Bed Combustion Model , 2007 .

[10]  G. Froment,et al.  Chemical Reactor Analysis and Design , 1979 .

[11]  Andrés Agudelo,et al.  Analysis of statistical repeatability of a fixed bed downdraft biomass gasification facility , 2013 .

[12]  Changkook Ryu,et al.  Effect of Model and Operating Parameters on Air Gasification of Char , 2006 .

[13]  Juan F. Pérez,et al.  Fixed Bed Gasification of Wood Species with Potential as Energy Crops in Colombia: The Effect of the Physicochemical Properties , 2013 .

[14]  J. Collazo,et al.  Numerical modeling of the combustion of densified wood under fixed-bed conditions , 2012 .

[15]  Juan F. Pérez,et al.  Effect of operating and design parameters on the gasification/combustion process of waste biomass in fixed bed downdraft reactors: An experimental study , 2012 .

[16]  Alvaro Sanz,et al.  Modeling circulating fluidized bed biomass gasifiers. Results from a pseudo-rigorous 1-dimensional model for stationary state , 2006 .

[17]  B. Babu,et al.  Modeling and simulation of reduction zone of downdraft biomass gasifier : Effect of char reactivity factor , 2006 .

[18]  J. Swithenbank,et al.  Effects of fuel devolatilisation on the combustion of wood chips and incineration of simulated municipal solid wastes in a packed bed , 2003 .

[19]  M. Modest.  Radiative heat transfer , 1993 .

[20]  D. Giltrap,et al.  A steady state model of gas-char reactions in a downdraft biomass gasifier , 2003 .

[21]  J. C. Moran,et al.  Study of a Fixed-Bed Biomass Combustor: Influential Parameters on Ignition Front Propagation Using Parametric Analysis , 2010 .

[22]  Juan F. Pérez,et al.  Thermochemical Equilibrium Model of Synthetic Natural Gas Production from Coal Gasification Using Aspen Plus , 2014 .

[23]  Andrea Corti,et al.  Biomass integrated gasification combined cycle with reduced CO2 emissions: Performance analysis and life cycle assessment (LCA) , 2004 .

[24]  Michael L. Hobbs,et al.  Modeling fixed‐bed coal gasifiers , 1992 .

[25]  K. W. Ragland,et al.  Modeling thermally thick pyrolysis of wood , 2002 .

[26]  C. Di Blasi,et al.  Modeling a stratified downdraft wood gasifier with primary and secondary air entry , 2013 .

[27]  Colomba Di Blasi,et al.  Modeling wood gasification in a countercurrent fixed‐bed reactor , 2004 .

[28]  Amitava Datta,et al.  Modelling of a downdraft biomass gasifier with finite rate kinetics in the reduction zone , 2009 .

[29]  Lei Dong,et al.  Effect of design and operating parameters on the gasification process of biomass in a downdraft fixed bed: An experimental study , 2014 .

[30]  Gilbert F. Froment,et al.  A two dimensional heterogeneous model for fixed bed catalytic reactors , 1971 .

[31]  S. Mahapatra,et al.  Influence of surface area to volume ratio of fuel particles on gasification process in a fixed bed , 2014 .

[32]  Roger Westerholm,et al.  State of the art of multi-fuel reformers for fuel cell vehicles: problem identification and research needs , 2001 .

[33]  Gilbert F. Froment,et al.  Heat transfer in packed beds , 1972 .

[34]  M. Hanna,et al.  Contemporary issues in thermal gasification of biomass and its application to electricity and fuel production. , 2008 .

[35]  L. Douglas Smoot,et al.  An improved model for fixed-bed coal combustion and gasification: sensitivity analysis and applications , 1996 .

[36]  M. Horttanainen,et al.  Propagation of the ignition front in beds of wood particles , 2000 .

[37]  Vida N. Sharifi,et al.  Effect of air flow rate and fuel moisture on the burning behaviours of biomass and simulated municipal solid wastes in packed beds , 2004 .

[38]  Dipal Baruah,et al.  Modeling of biomass gasification: A review , 2014 .

[39]  Alberto Coronas,et al.  Review and analysis of biomass gasification models , 2010 .

[40]  Donghoon Shin,et al.  The combustion of simulated waste particles in a fixed bed , 2000 .

[41]  Andrés Melgar,et al.  Modeling of fixed bed downdraft biomass gasification: Application on lab‐scale and industrial reactors , 2014 .

[42]  Juan F. Pérez,et al.  Effect of biomass particle size and air superficial velocity on the gasification process in a downdraft fixed bed gasifier. An experimental and modelling study , 2008 .

[43]  Mithiles Chakravarty,et al.  Modelling and simulation of a downdraft rice husk gasifier , 1994 .

[44]  Kenneth M. Bryden,et al.  Numerical Modeling of a Deep, Fixed Bed Combustor , 1996 .

[45]  Changkook Ryu,et al.  Effect of fuel properties on biomass combustion: Part I. Experiments—fuel type, equivalence ratio and particle size , 2006 .

[46]  L. D. Smoot,et al.  Combustion and gasification of coals in fixed-beds , 1993 .

[47]  A. Belghit,et al.  A downdraft high temperature steam-only solar gasifier of biomass char: A modelling study , 2011 .