A flexible technology for modified-release drugs: multiple-unit pellet system (MUPS).

Oral modified-release multiple-unit dosage forms have always been more effective therapeutic alternative to conventional or immediate release single-unit dosage forms. With regards to the final dosage form, the multiparticulates are usually formulated into single-unit dosage forms such as filling them into hard gelatin capsules or compressing them into tablets. There are many relevant articles and literature available on the preparation of pellets and coating technology. However, only few research articles discuss the issue of compaction of pellets into tablets. This review provides an update on this research area and discusses the phenomena and mechanisms involved during compaction of multiparticulate system and material and/or process-related parameters influencing tableting of multiparticulates to produce multiple-unit pellet system (MUPS) or pellet-containing tablets, which are expected to disintegrate rapidly into individual pellets and provide drug release profile similar to that obtained from uncoated pellets.

[1]  M. Celik,et al.  Compaction studies on pellets I. Uncoated pellets , 1993 .

[2]  M. Celik.  Compaction of multiparticulate oral dosage forms , 1994 .

[3]  T. Tabata,et al.  Formulation study for lansoprazole fast-disintegrating tablet. II. Effect of triethyl citrate on the quality of the products. , 2003, Chemical & pharmaceutical bulletin.

[4]  H. Nakagami,et al.  Development of controlled release matrix pellets by annealing with micronized water-insoluble or enteric polymers. , 2002, Journal of controlled release : official journal of the Controlled Release Society.

[5]  Jm Newton,et al.  Investigations of tablets prepared from pellets produced by extrusion and spheronisation. II. Modelling the properties of the tablets produced using regression analysis , 1997 .

[6]  J. Schwartz,et al.  Formulation and Compaction of Nonfracturing Deformable Coated Beads , 1996 .

[7]  G. Alderborn,et al.  Modulation of the tabletting behaviour of microcrystalline cellulose pellets by the incorporation of polyethylene glycol. , 1999, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[8]  M. Abbaspour,et al.  Preparation and characterization of ibuprofen pellets based on Eudragit RS PO and RL PO or their combination. , 2005, International journal of pharmaceutics.

[9]  J. Schwartz,et al.  The effect of wax on compaction of microcrystalline cellulose beads made by extrusion and spheronization. , 1998, Drug development and industrial pharmacy.

[10]  R. Bodmeier,et al.  The Effect of Curing on Drug Release and Morphological Properties of Ethylcellulose Pseudolatex-Coated Beads , 1994 .

[11]  J. Leroux,et al.  Coated pelletized dosage form: Effect of compaction on drug release , 1992 .

[12]  S. Hoag,et al.  Bead compacts. II. Evaluation of rapidly disintegrating nonsegregating compressed bead formulations. , 1999, Drug development and industrial pharmacy.

[13]  J. Sousa,et al.  Compaction, compression and drug release characteristics of xanthan gum pellets of different compositions. , 2004, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[14]  A. M. Dyer,et al.  THE STRENGTH AND COMPACTION OF MILLISPHERES The design of a controlled-release drug delivery system for ibuprofen in the form of a tablet comprising compacted polymer-coated millispheres. , 1994 .

[15]  P. Schmidt,et al.  Compression of enteric-coated pellets to disintegrating tablets : uniformity of dosage units , 1998 .

[16]  N. Sarisuta,et al.  In vitro properties of film-coated diltiazem hydrochloride pellets compressed into tablets , 1994 .

[17]  L. Delattre,et al.  A new enteric tablet of acetylsalicylic acid. II. Biopharmaceutical aspects , 1987 .

[18]  G. Alderborn,et al.  Effect of intragranular porosity on compression behaviour of and drug release from reservoir pellets. , 2003, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[19]  F Podczeck,et al.  Compaction of, and drug release from, coated drug pellets mixed with other pellets. , 1998, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[20]  P. Schmidt,et al.  Development of disintegrating multiple-unit tablets on a high-speed rotary tablet press. , 2000, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[21]  J. Krämer,et al.  Biopharmaceutical aspects of multiparticulates , 1994 .

[22]  Isaac Ghebre-Sellassie,et al.  Multiparticulate Oral Drug Delivery , 1994 .

[23]  K. Zuurman,et al.  THE EFFECT OF DRY GRANULATION ON THE CONSOLIDATION AND COMPACTION OF CRYSTALLINE LACTOSE , 1993 .

[24]  C Vervaet,et al.  Wax beads as cushioning agents during the compression of coated diltiazem pellets. , 2002, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[25]  P. York,et al.  The tensile strength and compression behaviour of lactose, four fatty acids, and their mixtures in relation to tableting. , 1973, The Journal of pharmacy and pharmacology.

[26]  G. Peck,et al.  The Effect of Agglomeration Methods on the Micromeritic Properties of a Maltodextrin Product, Maltrin 150™ , 1990 .

[27]  J. Remon,et al.  Enhancement of in vitro drug release by using polyethylene glycol 400 and PEG-40 hydrogenated castor oil in pellets made by extrusion/spheronisation , 1994 .

[28]  J. Haslam,et al.  Tableting of controlled release multiparticulates, the effect of millisphere size and protective overcoating , 1998 .

[29]  G. Alderborn,et al.  The effect of shape and porosity on the compression behaviour and tablet forming ability of granular materials formed from microcrystalline cellulose. , 2001, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[30]  M. Yoshida,et al.  Tableting of Coated Particles. II. Influence of Particle Size of Pharmaceutical Additives on Protection of Coating Membrane from Mechanical Damage during Compression Process. , 1998 .

[31]  Fridrun Podczeck,et al.  Influence of disintegrant type and proportion on the properties of tablets produced from mixtures of pellets , 1997 .

[32]  R. Bodmeier,et al.  Mechanical Properties of Dry and Wet Cellulosic and Acrylic Films Prepared from Aqueous Colloidal Polymer Dispersions Used in the Coating of Solid Dosage Forms , 1994, Pharmaceutical Research.

[33]  M. Abbaspour,et al.  Thermal treating as a tool to produce plastic pellets based on Eudragit RS PO and RL PO aimed for tableting. , 2007, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[34]  R. J. Roberts,et al.  The compaction of pharmaceutical and other model materials ― a pragmatic approach , 1987 .

[35]  Chris Vervaet,et al.  Compaction of enteric-coated pellets: influence of formulation and process parameters on tablet properties and in vivo evaluation. , 2004, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[36]  L. Augsburger,et al.  Compression Behavior of Acetylsalicylic Acid Pellets , 1993 .

[37]  T. Tabata,et al.  Formulation study for lansoprazole fast-disintegrating tablet. I. Effect of compression on dissolution behavior. , 2003, Chemical & pharmaceutical bulletin.

[38]  Jean Paul Remon,et al.  Development and in vitro evaluation of an enteric-coated multiparticulate drug delivery system for the administration of piroxicam to dogs. , 2002, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[39]  J. Schwartz,et al.  The Strength of Microcrystalline Cellulose Pellets: The Effect of Granulating with Water/Ethanol Mixtures , 1990 .

[40]  J. Mcginity,et al.  Properties of Tablets Containing Granulations of Ibuprofen and an Acrylic Copolymer Prepared by Thermal Processes , 2001, Pharmaceutical development and technology.

[41]  G. Ragnarsson,et al.  Development of A New Controlled Release Metoprolol Product , 1987 .

[42]  E. Rudnic,et al.  The effect of various polymeric coating systems on the dissolution and tableting properties of potassium chloride microcapsules , 1991 .

[43]  M. Aulton,et al.  Pharmaceutical Coating Technology , 1995 .

[44]  R. Bodmeier,et al.  PROCESS AND FONNULATION FACTORS AFFECTING THE DRUG RELEASE FROM PELLETS COATED WITH THE ETHYLCELLULOSE-PSEUDOLATEX AQUACOAT , 1997 .

[45]  Jpk Seville,et al.  Agglomerate strength measurement using a uniaxial confined compression test , 1994 .

[46]  F. Podczeck,et al.  The application of non-contact laser profilometry to the determination of permanent structural change induced by compaction of pellets II. Pellets dried by different techniques. , 2004, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[47]  H. Lieberman,et al.  Pharmaceutical dosage forms : tablets , 1980 .

[48]  W. Sawicki,et al.  Compressibility of floating pellets with verapamil hydrochloride coated with dispersion Kollicoat SR 30 D. , 2005, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[49]  J. Mcginity,et al.  Compaction properties of spheronized binary granular mixtures , 1995 .

[50]  G. Alderborn,et al.  Tabletting behaviour of pellets of a series of porosities--a comparisonbetween pellets of two different compositions. , 1999, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[51]  M. Rajaniemi,et al.  Effect of dosage form and formulation factors on the adherence of drugs to the esophagus. , 1983, Journal of pharmaceutical sciences.

[52]  S. Porter.  Controlled-Release Film Coatings Based on Ethylcellulose , 1989 .

[53]  H. Yuasa,et al.  Studies on internal structure of tablets. III. Manufacturing of tablets containing microcapsules. , 1990, Chemical & pharmaceutical bulletin.

[54]  G. Alderborn,et al.  Drug release from reservoir pellets compacted with some excipients of different physical properties. , 2003, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[55]  A. Nokhodchi,et al.  Thermal treating as a tool for sustained release of indomethacin from Eudragit RS and RL matrices. , 2002, International journal of pharmaceutics.

[56]  A. Sakr,et al.  Evaluation of the new polyvinylacetate/ povidone excipient for matrix sustained release dosage forms , 2001 .

[57]  F. Podczeck,et al.  Investigations into the deformability and tensile strength of pellets , 1998 .

[58]  G. Alderborn,et al.  Compression characteristics of granulated materials. II, Evaluation of granule fragmentation during compression by tablet permeability and porosity measurements , 1990 .

[59]  M. Adams,et al.  Micromechanical analyses of the pressure-volume relationship for powders under confined uniaxial compression , 1996 .

[60]  K. Yuen,et al.  Diclofenac release from eudragit-containing matrices and effects of thermal treatment. , 1998, Drug development and industrial pharmacy.

[61]  L. Augsburger,et al.  Effect of different excipients on the tableting of coated particles , 1994 .

[62]  P. Schmidt,et al.  Compression of enteric-coated pellets to disintegrating tablets , 1996 .

[63]  F. Podczeck,et al.  A study on the effect of drying techniques on the mechanical properties of pellets and compacted pellets. , 2004, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[64]  Fredrik Nicklasson,et al.  Effect of pellet size on degree of deformation and densification during compression and on compactability of microcrystalline cellulose pellets , 1998 .

[65]  P. Schmidt,et al.  Investigation of the pellet-distribution in single tablets via image analysis. , 1999, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[66]  G. Alderborn,et al.  Effect of drying rate on porosity and tabletting behaviour of cellulose pellets. , 2001, International journal of pharmaceutics.

[67]  B. Lippold,et al.  Film formation, reproducibility of production and curing with respect to release stability of functional coatings from aqueous polymer dispersions. , 2001, Die Pharmazie.

[68]  S. Hoag,et al.  Bead compacts. I. Effect of compression on maintenance of polymer coat integrity in multilayered bead formulations. , 1998, Drug development and industrial pharmacy.

[69]  G. Alderborn,et al.  Compression Shear Strength and Tableting Behavior of Microcrystalline Cellulose Agglomerates Modulated by a Solution Binder (Polyethylene Glycol) , 2001, Pharmaceutical Research.

[70]  R. Bodmeier,et al.  Compression of pellets coated with various aqueous polymer dispersions. , 2004, International journal of pharmaceutics.

[71]  I. Ghebre-Sellassie,et al.  The effect of product bed temperature on the microstructure of Aquacoat-based controlled-release coatings , 1990 .

[72]  S. Lin,et al.  Preparation of enteric-coated microcapsules for tableting by spray-drying technique and in vitro simulation of drug release from the tablet in GI tract. , 1980, Journal of pharmaceutical sciences.

[73]  G. Alderborn,et al.  Granule deformation and densification during compression of binary mixtures of granules. , 2001, International journal of pharmaceutics.

[74]  J. Remon,et al.  Bioavailability of ibuprofen from matrix pellets based on the combination of waxes and starch derivatives , 1998 .

[75]  P York,et al.  Studies of interaction phenomena in aqueous-based film coatings containing soluble additives using thermal analysis techniques. , 1988, Journal of pharmaceutical sciences.

[76]  R. Rowe.  The cracking of film coatings on film‐coated tablets—a theoretical approach with practical implications , 1981, The Journal of pharmacy and pharmacology.

[77]  J. Sousa,et al.  Compaction, compression and drug release properties of diclofenac sodium and ibuprofen pellets comprising xanthan gum as a sustained release agent. , 2005, International journal of pharmaceutics.

[78]  Ragnar Ek,et al.  Compression behaviour and compactability of microcrystalline cellulose pellets in relationship to their pore structure and mechanical properties , 1995 .

[79]  F. Podczeck,et al.  The application of non-contact laser profilometry to the determination of permanent structural changes induced by compaction of pellets. I. Pellets of different composition. , 2004, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[80]  G. Alderborn,et al.  Occurrence of fragmentation during compression of pellets prepared from a 4 to 1 mixture of dicalcium phosphate dihydrate and microcrystalline cellulose. , 1999, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[81]  A. M. Dyer,et al.  Effect of the Drying Method on the Mechanical and Drug Release Properties of Pellets Prepared by Extrusion-Spheronization , 1994 .

[82]  G. Alderborn,et al.  Degree of pellet deformation during compaction and its relationship to the tensile strength of tablets formed of microcrystalline cellulose pellets , 1996 .

[83]  Joseph B. Schwartz,et al.  Compaction Studies on Beads: Compression and Consolidation Parameters , 1994 .

[84]  P. Leterme,et al.  Development and industrial scale-up of tablets containing modified-release pellets , 1999 .

[85]  T. Tabata,et al.  Formulation study for lansoprazole fast-disintegrating tablet. III. Design of rapidly disintegrating tablets. , 2003, Chemical & pharmaceutical bulletin.