Propellant charring in pulsed plasma thrusters

The Teflon ablation in a micro-pulsed plasma thruster is studied with the aim of understanding the charring phenomenon. Microscopic analysis of the charred areas shows that it contains mainly carbon. It is concluded that the carbon char is formed as a result of carbon flux returned from the plasma. A simplified model of the current layer near the Teflon surface is developed. The current density and the Teflon surface temperature have peaks near the electrodes that explain preferential ablation of these areas, such as was observed experimentally. Comparison of the temperature field and the ablation rate distribution with photographs of the Teflon surface shows that the area with minimum surface temperature and ablation rate corresponds to the charring area. This finding suggests that the charring may be related to a temperature effect.

[1]  Michael Keidar,et al.  Vaporization of heated materials into discharge plasmas , 2001 .

[2]  M. Keidar,et al.  DEVICE AND PLUME MODEL OF AN ELECTROTHERMAL , 2000 .

[3]  Michael Keidar,et al.  Modeling of a Pulsed Plasma Thruster from Plasma Generation to Plume Far Field , 2000 .

[4]  P. Ajayan,et al.  Balance of graphite deposition and multishell carbon nanotube growth in the carbon arc discharge , 1997 .

[5]  Robert J. Vondra,et al.  A Flight Qualified Pulsed Electric Thruster for Satellite Control. , 1973 .

[6]  John M. Sankovic,et al.  NASA's electric propulsion program , 1998 .

[7]  Gregory G. Spanjers,et al.  Optimization issues for a micropulsed plasma thruster , 2006 .

[8]  Gregory G. Spanjers,et al.  Electromagnetic Effects in the Near Field Plume Exhaust of a Micro-Pulsed-Plasma Thruster , 2002 .

[9]  M. Keidar,et al.  On the model of Teflon ablation in an ablation-controlled discharge , 2001 .

[10]  Edgar Y. Choueiri.  System Optimization of Ablative Pulsed Plasma Thrusters for Stationkeeping , 1996 .

[12]  M. Keidar,et al.  Device and plume model of an electrothermal pulsed plasma thruster , 2000 .

[13]  P. Turchi,et al.  Pulsed Plasma Thruster , 1998 .

[14]  Paul Sanneman,et al.  On-Orbit Testing of the EO-1 Pulsed Plasma Thruster , 2002 .

[15]  M. Keidar,et al.  Electrical Discharge in the Teflon Cavity of a Coaxial , 2000 .

[16]  Michael Keidar,et al.  Electromagnetic effects in the near field plume exhaust of a pulsed plasma thruster , 2001 .

[17]  Iu. P. Raizer.  Gas Discharge Physics , 1991 .

[18]  Gregory G. Spanjers,et al.  AFRL MicroPPT Development for Small Spacecraft Propulsion , 2002 .

[19]  Michael Keidar,et al.  Model of an electrothermal pulsed plasma thruster , 2003 .

[20]  Gregory G. Spanjers,et al.  Effects of Postpulse Surface Temperature on Micropulsed Plasma Thruster Operation , 2005 .

[21]  Gregory G. Spanjers,et al.  Micropropulsion research at AFRL , 2000 .

[22]  Iain D. Boyd,et al.  Numerical modeling of spacecraft electric propulsion thrusters , 2005 .

[23]  Ronald A. Spores,et al.  The USAF Electric Propulsion Program , 1998 .