Cooling of microprocessors with micro-evaporation: A novel two-phase cooling cycle

Three micro-evaporator cooling cycles, one with a pump, one with a compressor and a hybrid of the two together, are proposed for cooling a computer blade server. The hybrid cycle is characterized by the interchangeability between the first two cycles, where the decision on the cycle to operate is based on the season (necessity or economical benefit for heat recovery) or the maintenance of cycle's driver. The main characteristics of each cycle are presented as well as the details of the micro-evaporator cooler for the blade's CPU. Analysis of the cycle overall efficiency and the potential for heat recovery shows that the best cycle to use depends mainly on the end application of the heat recovered. Four refrigerants were evaluated as the possible working fluids for cooling the microprocessors. HFC134a and HFC245fa were found to be the best choices for the desired application. (c) 2010 Elsevier Ltd and IIR. All rights reserved.

[1]  S.V. Garimella,et al.  Experimental Investigation of a Miniature-Scale Refrigeration System for Electronics Cooling , 2006, IEEE Transactions on Components and Packaging Technologies.

[2]  Y. Joshi,et al.  Cryogenic/sub-ambient cooling of electronics: revisited , 2004, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).

[3]  Herman Chu,et al.  Analysis of Alternative Data Center Cooling Approaches , 2007 .

[4]  A. Heydari.  Miniature vapor compression refrigeration systems for active cooling of high performance computers , 2002, ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258).

[5]  J. Swanson,et al.  Designing a mesoscale vapor-compression refrigerator for cooling high-power microelectronics , 2004, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).

[6]  John R. Thome,et al.  Heat Transfer Model for Evaporation in Microchannels, Part II: Comparison with the Database , 2004 .

[7]  Allan W. Scott.  Cooling of electronic equipment , 1974 .

[8]  John R. Thome,et al.  Recent Advances in Thermal Modeling of Micro-Evaporators for Cooling of Microprocessors , 2007 .

[9]  Steve Greenberg,et al.  Best Practices for Data Centers: Lessons Learned from Benchmarking 22 Data Centers , 2006 .

[10]  John R. Thome,et al.  An analysis of experimental data and prediction methods for two-phase frictional pressure drop and flow boiling heat transfer in micro-scale channels , 2006 .

[11]  John R. Thome,et al.  A heat transfer model for evaporation of coalescing bubbles in micro-channel flow , 2010 .

[12]  J. Thome,et al.  Flow Boiling of R134a in a Multi-Microchannel Heat Sink With Hotspot Heaters for Energy-Efficient Microelectronic CPU Cooling Applications , 2011, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[13]  A. L. Phillips,et al.  The thermal bus opportunity : A quantum leap in data center cooling potential , 2005 .

[14]  John R. Thome,et al.  Unified macro-to-microscale method to predict two-phase frictional pressure drops of annular flows , 2009 .

[15]  John R. Thome,et al.  A theoretical model for the prediction of the critical heat flux in heated microchannels , 2008 .

[16]  W. B. Gosney.  Principles of Refrigeration , 1982 .

[17]  Roger R. Schmidt,et al.  High-end server low-temperature cooling , 2002, IBM J. Res. Dev..

[18]  Joseph Marsala,et al.  Pumped Liquid Multiphase Cooling , 2004 .

[19]  John R. Thome,et al.  Heat Transfer Model for Evaporation in Microchannels, Part I: Presentation of the Model , 2004 .

[20]  John R. Thome,et al.  Critical heat flux in multi-microchannel copper elements with low pressure refrigerants , 2010 .

[21]  Farrokh Mistree,et al.  The Thermal Design of a Next Generation Data Center: A Conceptual Exposition , 2008 .

[22]  B. Michel,et al.  High Heat Flux Two-Phase Cooling in Silicon Multimicrochannels , 2008, IEEE Transactions on Components and Packaging Technologies.

[23]  J. Thome,et al.  Saturated critical heat flux in a multi-microchannel heat sink fed by a split flow system , 2010 .

[24]  J. Thome,et al.  State of the Art of High Heat Flux Cooling Technologies , 2007 .

[25]  M. Mochizuki,et al.  Small scale refrigeration system for electronics cooling within a notebook computer , 2006, Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, 2006. ITHERM 2006..