Preparation and Performance of Multilayer Si-B-C-N/Diamond-like Carbon Gradient Films

Si-B-C-N/diamond-like carbon (DLC) gradient films with different layers were prepared on a glass substrate by radio frequency magnetron sputtering, and the structure and surface morphology of the resulting films were analyzed by scanning electron microscopy, Raman spectrometry, and X-ray photoelectron spectroscopy. The mechanical and optical properties of the films were studied using a multifunctional material mechanical testing system, UV-Vis spectrophotometer, and micro-Vickers hardness tester. The gradient structure promotes the formation of sp3 bonds and improves the hardness and optical transmittance of the resulting films. Among the prepared films, the single-layer Si-B-C-N/DLC gradient film shows the highest optical transmittance (97%). Film–substrate adherence is strengthened by the introduction of the gradient structure. The best adhesion was obtained with a double-layer Si-B-C-N/DLC gradient film. Suitable anti-wear properties were exhibited in both dry (0.18) and wet (0.07) conditions. In this paper, evaluation of the microstructural, optical, and mechanical properties of the films could provide new insights into improvements in the bonding force of glass-based DLC films and enrich the experimental data of DLC multilayer film systems.

[1]  Zhenyin Hai,et al.  High-temperature electrical properties of polymer-derived ceramic SiBCN thin films fabricated by direct writing , 2022, Ceramics International.

[2]  Q. Song,et al.  Optimizing mechanical and tribological properties of DLC/Cr3C2-NiCr duplex coating via tailoring interlayer thickness , 2022, Surface and Coatings Technology.

[3]  Guifang Han,et al.  Additive manufacturing of nanocellulose/polyborosilazane derived CNFs-SiBCN ceramic metamaterials for ultra-broadband electromagnetic absorption , 2021, Chemical Engineering Journal.

[4]  Kai-feng Zhang,et al.  Effects of Ti interlayer on adhesion property of DLC films: A first principle study , 2021 .

[5]  Xue-Hua Ye,et al.  Microstructure, mechanical and tribological properties of multilayer Ti-DLC thick films on Al alloys by filtered cathodic vacuum arc technology , 2021 .

[6]  Lai-fei Cheng,et al.  A novel strategy to prepare BN interface and its effects on microstructure and properties of SiCw/BN/SiC composites , 2020 .

[7]  W. Gong,et al.  Construction of multiple heterogeneous interface and its effect on microwave absorption of SiBCN ceramics , 2020 .

[8]  R. Song,et al.  Microstructure and properties of DLC/CN films with different CN sublayer thicknesses , 2019, Surface and Coatings Technology.

[9]  V. Ivashchenko,et al.  Deposition and Characterization of Thin Si-B-C-N Films by DC Reactive Magnetron Sputtering of Composed Si/B4C Target , 2019, Journal of Superhard Materials.

[10]  R. S. Walia,et al.  A critical review of diamond like carbon coating for wear resistance applications , 2019, International Journal of Refractory Metals and Hard Materials.

[11]  N. Huang,et al.  The effect of hydrogen on the tribological behavior of diamond like carbon (DLC) coatings sliding against Al2O3 in water environment , 2017 .

[12]  S. Brühl,et al.  Mechanical and corrosion behavior of thick and soft DLC coatings , 2017 .

[13]  M. Ürgen,et al.  Raman spectroscopy of thin DLC film deposited by plasma electrolysis process , 2017 .

[14]  J. Vetter 60 years of DLC coatings: Historical highlights and technical review of cathodic arc processes to synthesize various DLC types, and their evolution for industrial applications , 2014 .

[15]  Dong Wook Kim,et al.  Effects of sliding velocity and ambient temperature on the friction and wear of a boundary-lubricated, multi-layered DLC coating , 2014 .

[16]  F. Yakuphanoglu,et al.  Optical properties of Al-CdO nano-clusters thin films , 2013 .

[17]  G. Limbert,et al.  The friction of diamond-like carbon coatings in a water environment , 2013 .

[18]  P. Zeman,et al.  Pulsed reactive magnetron sputtering of high-temperature Si–B–C–N films with high optical transparency , 2013 .

[19]  Kyung-Woong Kim,et al.  Effects of sliding velocity and normal load on friction and wear characteristics of multi-layered diamond-like carbon (DLC) coating prepared by reactive sputtering , 2013 .

[20]  N. Huang,et al.  The microstructure and mechanical properties of multilayer diamond-like carbon films with different modulation ratios , 2013 .

[21]  J. Colligon,et al.  Amorphous Boron containing silicon carbo-nitrides created by ion sputtering , 2011 .

[22]  P. Zeman,et al.  Thermal stability of magnetron sputtered Si―B―C―N materials at temperatures up to 1700 °C , 2010 .

[23]  Junho Choi,et al.  Effects of nitrogen gas ratio on composition and microstructure of BCN films prepared by RF magnetron sputtering , 2009 .

[24]  P. A. Radi,et al.  A tribological study of the hybrid lubrication of DLC films with oil and water , 2009 .

[25]  Kwang-Ryeol Lee,et al.  Effect of silver doping on optical property of diamond like carbon films , 2009 .

[26]  J. Robertson,et al.  Raman spectroscopy of hydrogenated amorphous carbons , 2005 .

[27]  J. Robertson,et al.  Protective diamond-like carbon coatings for future optical storage disks , 2005 .

[28]  F. Aldinger,et al.  Novel Silicon‐Boron‐Carbon‐Nitrogen Materials Thermally Stable up to 2200°C , 2004 .

[29]  L. Hultman,et al.  Fullerene-like BCN thin films: a computational and experimental study , 2004 .

[30]  J. Robertson Diamond-like amorphous carbon , 2002 .

[31]  John Robertson,et al.  Resonant Raman spectroscopy of disordered, amorphous, and diamondlike carbon , 2001 .

[32]  G. Favaro,et al.  The effect of intrinsic parameters on the critical load as measured with the scratch test method , 2001 .

[33]  A. Grill,et al.  The role of hydrogen on the friction mechanism of diamond-like carbon films , 2001 .

[34]  F. Cui,et al.  A review of investigations on biocompatibility of diamond-like carbon and carbon nitride films , 2000 .

[35]  Zhili Sun,et al.  Characterization of ta-C films prepared by a two-step filtered vacuum arc deposition technique , 2000 .

[36]  J. Robertson,et al.  Interpretation of Raman spectra of disordered and amorphous carbon , 2000 .

[37]  Da-yung Wang,et al.  Characterization of hydrogen-free diamond-like carbon films deposited by pulsed plasma technology , 1999 .