Design of a low-noise preamplifier for nerve cuff electrode recording

This paper discusses certain important issues involved in the design of a nerve signal preamplifier for implantable neuroprostheses. Since the electroneurogram signal measured from cuff electrodes is typically on the order of 1 /spl mu/V, a very low-noise interface is essential. We present the argument for the use of BiCMOS technology in this application and then describe the design and evaluation of a complete preamplifier fabricated in a 0.8-/spl mu/m double-metal double-poly process. The preamplifier has a nominal voltage gain of 100, a bandwidth of 15 kHz, and a measured equivalent input-referred noise voltage spectral density of 3.3 nV//spl radic/Hz at 1 kHz. The total input-referred rms noise voltage in a bandwidth 1 Hz-10 kHz is 290 nV, the power consumption is 1.3 mW from /spl plusmn/2.5-V power supplies, and the active area is 0.3 mm/sup 2/.

[1]  J.-C. Bertails.  Low-frequency noise considerations for MOS amplifiers design , 1979 .

[2]  W.M.C. Sansen,et al.  A micropower low-noise monolithic instrumentation amplifier for medical purposes , 1987 .

[3]  F. Callias,et al.  A set of four ICs in CMOS technology for a programmable hearing aid , 1989 .

[4]  Robert G. Meyer,et al.  Analysis and Design of Analog Integrated Circuits , 1993 .

[5]  Morten Kristian Haugland,et al.  Skin contact force information in sensory nerve signals recorded by implanted cuff electrodes , 1994 .

[6]  Mesut Sahin,et al.  Whole nerve recordings with the spiral nerve cuff electrode , 1994, Proceedings of 16th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[7]  Thomas Sinkjær,et al.  Cutaneous whole nerve recordings used for correction of footdrop in hemiplegic man , 1995 .

[8]  Ronald Raymond Riso,et al.  Performance of alternative amplifier configurations for tripolar nerve cuff recorded ENG , 1996, Proceedings of 18th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[9]  D. Durand,et al.  An interface for nerve recording and stimulation with cuff electrodes , 1997, Proceedings of the 19th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. 'Magnificent Milestones and Emerging Opportunities in Medical Engineering' (Cat. No.97CH36136).

[10]  T. Sinkjaer,et al.  Detecting sudden bladder pressure increases from the pelvic nerve afferent activity , 1998, Proceedings of the 20th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. Vol.20 Biomedical Engineering Towards the Year 2000 and Beyond (Cat. No.98CH36286).

[11]  T. Sinkjaer,et al.  Cuff electrodes for long-term recording of natural sensory information , 1999, IEEE Engineering in Medicine and Biology Magazine.

[12]  T. Sinkjaer,et al.  Control of FES thumb force using slip information obtained from the cutaneous electroneurogram in quadriplegic man. , 1999, IEEE transactions on rehabilitation engineering : a publication of the IEEE Engineering in Medicine and Biology Society.

[13]  Nick Donaldson,et al.  Adaptive interference reduction (AIR) in cuff electrode recordings , 1999, Proceedings of the First Joint BMES/EMBS Conference. 1999 IEEE Engineering in Medicine and Biology 21st Annual Conference and the 1999 Annual Fall Meeting of the Biomedical Engineering Society (Cat. N.

[14]  Torsten Lehmann,et al.  An implantable CMOS signal conditioning system for recording nerve signals with cuff electrodes , 2000, 2000 IEEE International Symposium on Circuits and Systems. Emerging Technologies for the 21st Century. Proceedings (IEEE Cat No.00CH36353).

[15]  Reid R. Harrison,et al.  A low-power, low-noise CMOS amplifier for neural recording applications , 2002, 2002 IEEE International Symposium on Circuits and Systems. Proceedings (Cat. No.02CH37353).

[16]  A. Demosthenous,et al.  A CMOS adaptive interference reduction system for nerve cuff recordings , 2002, Proceedings of the 28th European Solid-State Circuits Conference.

[17]  Khalil Najafi,et al.  A low power fully integrated bandpass operational amplifier for biomedical neural recording applications , 2002, Proceedings of the Second Joint 24th Annual Conference and the Annual Fall Meeting of the Biomedical Engineering Society] [Engineering in Medicine and Biology.

[18]  R. R. Harrison,et al.  A low-power low-noise CMOS amplifier for neural recording applications , 2003, IEEE J. Solid State Circuits.