Microchannel Fabrication on Glass Materials for Microfluidic Devices

Microchannels are the main features that characterize microfluidic devices. Also, glass is given priority in selecting a substrate material in the development of microfluidic devices due to its high degree of transparency, high chemical resistance, inertness to most substances, ability to sustain higher temperature, biological compatibility, and relatively low non-specific adsorption. However, the high cost and time-consuming labor for fabricating microchannels on glass limit the development of glass-based microfluidic devices, especially for point-of-care test devices. Therefore, it is important to have a capability for fabricating microchannels on glass more efficiently. In this context, the present paper reviews the processes applicable for fabricating microchannels on glass, which include chemical, mechanical, laser-based, and other processes. The state of the art for these processes, and their advantages and limits are also addressed, which will guide in selecting the processes suitable for constructing glass-based microfluidic devices.

[1]  S. Malkin,et al.  Grinding of Glass: Surface Structure and Fracture Strength , 1976 .

[2]  S. Malkin,et al.  Grinding of Glass: The Mechanics of the Process , 1976 .

[3]  J. Haisma,et al.  Transparent single-point turning of optical glass:: A phenomenological presentation , 1979 .

[4]  I. Finnie,et al.  On the machining of glass , 1980 .

[5]  A. Evans,et al.  Elastic/Plastic Indentation Damage in Ceramics: The Lateral Crack System , 1982 .

[6]  J. Melngailis.  Focused ion beam technology and applications , 1987 .

[7]  H. Ahmed,et al.  Scanning ion microscopy and microsectioning of electron beam recrystallized silicon on insulator devices , 1988 .

[8]  H. Ahmed,et al.  Fabrication of Planar and Cross-Sectional TEM Specimens Using a Focused Ion Beam , 1990 .

[9]  Nakasuji Tomoaki,et al.  Diamond Turning of Brittle Materials for Optical Components , 1990 .

[10]  W. S. Blackley,et al.  Ductile-regime machining model for diamond turning of brittle materials , 1991 .

[11]  R. Scattergood,et al.  Ductile-Regime Grinding: A New Technology for Machining Brittle Materials , 1991 .

[12]  T. Ohnishi,et al.  Focused‐ion‐beam ‘‘cutter’’ and ‘‘attacher’’ for micromachining and device transplantation , 1991 .

[13]  Kenji Inoue,et al.  Ultraprecision ductile cutting of glass by applying ultrasonic vibration , 1992 .

[14]  D. Golini,et al.  Chemomechanical effects in ductile-regime machining of glass , 1993 .

[15]  H. V. Snelling,et al.  Experimental observations and analysis of CO2 laser‐induced microcracking of glass , 1995 .

[16]  Y. Takeuchi,et al.  Ultraprecision 3D Micromachining of Glass , 1996 .

[17]  Xi-Qing Sun,et al.  Micro ultrasonic machining and self-aligned multilayer machining/assembly technologies for 3D micromachines , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[18]  Amitabha Ghosh,et al.  Mechanism of spark generation during electrochemical discharge machining: a theoretical model and experimental verification , 1996 .

[19]  G. Stemme,et al.  Deep wet etching of borosilicate glass using an anodically bonded silicon substrate as mask , 1998 .

[20]  Amitabha Ghosh,et al.  Mechanism of material removal in electrochemical discharge machining: a theoretical model and experimental verification , 1997 .

[21]  Vijay K. Jain,et al.  Experimental investigations into ECSD process using various tool kinematics , 1998 .

[22]  P. J. Slikkerveer,et al.  Erosion and damage by sharp particles , 1998 .

[23]  B. Bhattacharyya,et al.  Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials , 1999 .

[24]  Pulak M. Pandey,et al.  On the analysis of the electrochemical spark machining process , 1999 .

[25]  V. Fascio,et al.  In situ measurement and micromachining of glass , 1999, MHS'99. Proceedings of 1999 International Symposium on Micromechatronics and Human Science (Cat. No.99TH8478).

[26]  T. Masuzawa,et al.  Microultrasonic Machining by the Application of Workpiece Vibration , 1999 .

[27]  V. Fascio,et al.  3D microstructuring of glass using electrochemical discharge machining (ECDM) , 1999, MHS'99. Proceedings of 1999 International Symposium on Micromechatronics and Human Science (Cat. No.99TH8478).

[28]  P. J. Slikkerveer,et al.  High quality mechanical etching of brittle materials by powder blasting , 2000 .

[29]  M. Gijs,et al.  Powder blasting for three-dimensional microstructuring of glass , 2000 .

[30]  S. Quake,et al.  Monolithic microfabricated valves and pumps by multilayer soft lithography. , 2000, Science.

[31]  W. J. Endres,et al.  AN EXPERIMENTAL STUDY OF ORTHOGONAL MACHINING OF GLASS , 2000 .

[32]  M. Gijs,et al.  The introduction of powder blasting for sensor and microsystem applications , 2000 .

[33]  A. Lenk,et al.  Damage-free laser micromarking of glass , 2000 .

[34]  Gwo-Bin Lee,et al.  A fast prototyping process for fabrication of microfluidic systems on soda-lime glass , 2001 .

[35]  M. Esashi,et al.  Deep reactive ion etching of Pyrex glass using SF6 plasma , 2001 .

[36]  W. Cho,et al.  Micro-grooving of glass using micro-abrasive jet machining , 2004 .

[37]  C. T. Yang,et al.  Micro Hole Machining of Borosilicate Glass through Electrochemical Discharge Machining (ECDM) , 2001 .

[38]  H. Fouckhardt,et al.  Deep wet etching of fused silica glass for hollow capillary optical leaky waveguides in microfluidic devices , 2001 .

[39]  Y. Horiike,et al.  Miniaturized Capillary Electrophoresis Fabricated on Pyrex Glass Chips Using Deep Dry Etching and Anodic Bonding , 2002 .

[40]  B. Yan,et al.  Study of precision micro-holes in borosilicate glass using micro EDM combined with micro ultrasonic vibration machining , 2002 .

[41]  H. Wensink.  Fabrication of microstructures by powder blasting , 2002 .

[42]  Reinhart Poprawe,et al.  UV laser radiation-induced modifications and microstructuring of glass , 2002, SPIE LASE.

[43]  H. Bleuler,et al.  Investigations of the spark-assisted chemical engraving , 2003 .

[44]  L. Schäfer,et al.  Micro abrasive pencils with CVD diamond coating , 2003 .

[45]  Y. Horiike,et al.  Deep dry etching of borosilicate glass using fluorine-based high-density plasmas for microelectromechanical system fabrication , 2003 .

[46]  D. Chiu,et al.  Rapid prototyping of glass microchannels , 2003 .

[47]  H. Niino,et al.  Surface micro-fabrication of silica glass by excimer laser irradiation of organic solvent , 2003 .

[48]  M. Esashi,et al.  Smooth surface glass etching by deep reactive ion etching with SF6 and Xe gases , 2003 .

[49]  B. Ngoi,et al.  Ultraprecision Diamond Turning of Glass with Ultrasonic Vibration , 2003 .

[50]  A. Evans,et al.  A new masking technology for deep glass etching and its microfluidic application , 2004 .

[51]  T. Chong,et al.  Laser Precision Engineering of Glass Substrates , 2004 .

[52]  Jian Zhao,et al.  Wet etching study of silica glass after CW CO2 laser treatment , 2004 .

[53]  T. Choi,et al.  Liquid-assisted femtosecond laser drilling of straight and three-dimensional microchannels in glass , 2004 .

[54]  Eric R. Marsh,et al.  Micro machining glass with polycrystalline diamond tools shaped by micro electro discharge machining , 2004 .

[55]  D. Miller.  Micromachining with abrasive waterjets , 2004 .

[56]  Guoxiong Zhang,et al.  An experimental study of optical glass machining , 2004 .

[57]  T. Shirakashi,et al.  A Study on Cutting Force in the Milling Process of Glass , 2005 .

[58]  A. Offenhäusser,et al.  The evaporated metal masks for chemical glass etching for BioMEMS , 2005 .

[59]  N. Lee,et al.  Deep dry etching of borosilicate glass using SF6 and SF6/Ar inductively coupled plasmas , 2005 .

[60]  Daniel T Chiu,et al.  Disposable microfluidic devices: fabrication, function, and application. , 2005, BioTechniques.

[61]  B. Karpuschewski,et al.  Modelling and evaluation of the micro abrasive blasting process , 2005 .

[62]  M. Yen,et al.  Crack-free micromachining on glass using an economic Q-switched 532 nm laser , 2006 .

[63]  K. Zimmer,et al.  Backside etching of fused silica with Nd:YAG laser , 2006 .

[64]  K. Takechi,et al.  Very High Rate and Uniform Glass Etching with HF/HCl Spray for Transferring Thin-Film Transistor Arrays to Flexible Substrates , 2006 .

[65]  R. Maeda,et al.  Microstructuring of glassy carbon mold for glass embossing - Comparison of focused ion beam, nano/femtosecond-pulsed laser and mechanical machining , 2006 .

[66]  M. Naftali,et al.  Dry etching of deep cavities in Pyrex for MEMS applications using standard lithography , 2006 .

[67]  T. Akashi,et al.  Deep reactive ion etching of borosilicate glass using an anodically bonded silicon wafer as an etching mask , 2006 .

[68]  T. Matsumura,et al.  Engineering surface and development of a new DNA micro array chip , 2006 .

[69]  L. A. Hof,et al.  The gas film in Spark Assisted Chemical Engraving (SACE) - A key element for micro-machining applications , 2006 .

[70]  N. Morita,et al.  Rapid nanopatterning of a Zr-based metallic glass surface utilizing focused ion beam induced selective etching , 2006 .

[71]  H. Niino,et al.  Rapid prototyping of silica glass microstructures by the LIBWE method: Fabrication of deep microtrenches , 2006 .

[72]  C. Iliescu.  MICROFLUIDICS IN GLASS: TECHNOLOGIES AND APPLICATIONS , 2006 .

[73]  S. Dimov,et al.  Focused-ion-beam direct structuring of fused silica for fabrication of nano-imprinting templates , 2007 .

[74]  B. Yan,et al.  3D microstructuring of Pyrex glass using the electrochemical discharge machining process , 2007 .

[75]  F. Tay,et al.  Strategies in deep wet etching of Pyrex glass , 2007 .

[76]  B. Yan,et al.  The tool geometrical shape and pulse-off time of pulse voltage effects in a Pyrex glass electrochemical discharge microdrilling process , 2007 .

[77]  C. David,et al.  Laser processing of micro-optical components in quartz , 2007 .

[78]  E. Carrilho,et al.  A toner-mediated lithographic technology for rapid prototyping of glass microchannels. , 2007, Lab on a chip.

[79]  Q. Ren,et al.  A Rapid and Low-Cost Procedure for Fabrication of Glass Microfluidic Devices , 2007, Journal of Microelectromechanical Systems.

[80]  D. Pham,et al.  A study of fused silica micro/nano patterning by focused-ion-beam , 2007 .

[81]  A. Tseng,et al.  Recent developments on microablation of glass materials using excimer lasers , 2007 .

[82]  S. Shen,et al.  Fabrication of 3-D Submicron Glass Structures by FIB , 2007, 2007 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[83]  Vinod Yadava,et al.  Laser beam machining—A review , 2008 .

[84]  Biing-Hwa Yan,et al.  Improving the machining efficiency in electrochemical discharge machining (ECDM) microhole drilling by offset pulse voltage , 2008 .

[85]  M. Hong,et al.  Near-field enhanced femtosecond laser nano-drilling of glass substrate , 2008 .

[86]  T. Matsumura,et al.  Influence of tool inclination on brittle fracture in glass cutting with ball end mills , 2008 .

[87]  R. Maeda,et al.  REPLICATION OF NANO/MICRO QUARTZ MOLD BY HOT EMBOSSING AND ITS APPLICATION TO BOROSILICATE GLASS EMBOSSING , 2008 .

[88]  J. Miao,et al.  On the wet etching of Pyrex glass , 2008 .

[89]  T. Matsumura,et al.  Cutting process of glass with inclined ball end mill , 2008 .

[90]  V. Jain,et al.  On the mechanism of material removal in electrochemical spark machining of quartz under different polarity conditions , 2008 .

[91]  Souta Matsusaka,et al.  Micro-machinability of silver–sodium ion-exchanged glass by UV nanosecond laser , 2008 .

[92]  M. Hong,et al.  Laser etching of glass substrates by 1064 nm laser irradiation , 2008 .

[93]  B. Yan,et al.  Improvement of Electrochemical Microdrilling Accuracy Using Helical Tool , 2008 .

[94]  W. H. Lin,et al.  Crackless linear through-wafer etching of Pyrex glass using liquid-assisted CO2 laser processing , 2008 .

[95]  M. Mitsuishi,et al.  Analysis of laser micromachining in silica glass with an absorbent slurry , 2008 .

[96]  J. Vieillard,et al.  Integrated microfluidic-microoptical systems fabricated by dry etching of soda-lime glass , 2008 .

[97]  Jun Wang,et al.  Modelling the erosion rate in micro abrasive air jet machining of glasses , 2009 .

[98]  T. Matsumura,et al.  Effect of tilt angle on cutting regime transition in glass micromilling , 2009 .

[99]  R. Hsu,et al.  Hot Embossing of Parallel v‐Groove Microstructures on Glass , 2009 .

[100]  Qing Yang,et al.  Maskless fabrication of concave microlens arrays on silica glasses by a femtosecond-laser-enhanced local wet etching method. , 2010, Optics express.

[101]  R. Masel,et al.  The fabrication of all-silicon micro gas chromatography columns using gold diffusion eutectic bonding , 2009 .

[102]  H. Niino,et al.  Flexible 3D deep microstructures of silica glass by laser-induced backside wet etching , 2010 .

[103]  Thai Nguyen,et al.  Machining of Micro-Channels on Brittle Glass Using an Abrasive Slurry Jet , 2010 .

[104]  C. Chung,et al.  CO2 laser micromachined crackless through holes of Pyrex 7740 glass , 2010 .

[105]  C. Rüssel,et al.  Micro structuring of inorganic glass by hot embossing of coated glass wafers , 2010 .

[106]  Cheng-Kuang Yang,et al.  Effect of surface roughness of tool electrode materials in ECDM performance , 2010 .

[107]  J. Gäbler,et al.  Precision and micro CVD diamond-coated grinding tools , 2010 .

[108]  T. Matsumura,et al.  Abrasive water jet machining of glass with stagnation effect , 2011 .

[109]  Wong Yoke San,et al.  An experimental approach to study the capability of end-milling for microcutting of glass , 2011 .

[110]  Shun-Tong Chen,et al.  Development of an extremely thin grinding-tool for grinding microgrooves in optical glass , 2011 .

[111]  Wong Yoke San,et al.  Ultraprecision ductile mode machining of glass by micromilling process , 2011 .

[112]  Jun Ni,et al.  A finite element based model for electrochemical discharge machining in discharge regime , 2011 .

[113]  Y. Wong,et al.  A study on microgrinding of brittle and difficult-to-cut glasses using on-machine fabricated poly crystalline diamond (PCD) tool , 2012 .

[114]  Chinghua Hung,et al.  Ultrasonic vibration-assisted optical glass hot embossing process , 2012 .

[115]  S. Ahsan,et al.  Femtosecond Laser Induced Nanostructures in Soda-lime Glass , 2012 .

[116]  R. Wüthrich,et al.  Micro-texturing channel surfaces on glass with spark assisted chemical engraving , 2012 .

[117]  H. Tsai,et al.  Fabrication of glass micro-prisms using ultra-fast laser pulses with chemical etching process , 2012 .

[118]  Thai Nguyen,et al.  A STUDY OF MICRO-CHANNELING ON GLASSES USING AN ABRASIVE SLURRY JET , 2012 .

[119]  Jing‐Juan Xu,et al.  Glass etching to bridge micro- and nanofluidics. , 2012, Lab on a chip.

[120]  K. Yamaguchi,et al.  Micro Hole Processing Using Electro-Chemical Discharge Machining , 2012 .

[121]  Ji-Yen Cheng,et al.  Blue Light Plasma Emission During LIBWE Using 532 nm Q-switched Nanosecond Laser , 2012 .

[122]  Hongliang Wang,et al.  Single step channeling in glass interior by femtosecond laser , 2012 .

[123]  Sung-hoon Ahn,et al.  Review: Developments in micro/nanoscale fabrication by focused ion beams , 2012 .

[124]  K. Lang,et al.  Advances in CO2-Laser Drilling of Glass Substrates , 2012 .

[125]  Thai Nguyen,et al.  Modelling of the micro-channelling process on glasses using an abrasive slurry jet , 2012 .

[126]  J. Miao,et al.  A practical guide for the fabrication of microfluidic devices using glass and silicon. , 2012, Biomicrofluidics.

[127]  P. Herman,et al.  Single- and multi-scan femtosecond laser writing for selective chemical etching of cross section patternable glass micro-channels , 2012 .

[128]  T. Matsumura,et al.  Parametric glass milling with simultaneous control , 2013 .

[129]  Chinghua Hung,et al.  Development of a new apparatus for ultrasonic vibration-assisted glass hot embossing process , 2013 .

[130]  J. K. Spelt,et al.  Numerical simulation of surface roughness and erosion rate of abrasive jet micro-machined channels , 2013 .

[131]  F. He,et al.  Direct laser writing of sub-50 nm nanofluidic channels buried in glass for three-dimensional micro-nanofluidic integration. , 2013, Lab on a chip.

[132]  F. He,et al.  Compact 3D Microfluidic Channel Structures Embedded in Glass Fabricated by Femtosecond Laser Direct Writing , 2013 .

[133]  J. Gottmann,et al.  Microcutting and Hollow 3D Microstructures in Glasses by In-volume Selective Laser-induced Etching (ISLE) , 2013 .

[134]  C. Chu,et al.  Hybrid micromachining of glass using ECDM and micro grinding , 2013 .

[135]  C. Chung,et al.  Fabrication and simulation of glass micromachining using CO2 laser processing with PDMS protection , 2013 .

[136]  K. Ren,et al.  Materials for microfluidic chip fabrication. , 2013, Accounts of chemical research.

[137]  Ji-Yen Cheng.  Crack-free Micromachining of Glass Ceramic Using Visible LIBWE , 2013 .

[138]  D. Snita,et al.  Fast and simple fabrication procedure of whole-glass microfluidic devices with metal electrodes , 2013 .

[139]  Jan C. Aurich,et al.  Integrated Desktop Machine Tool for Manufacturing and Application of Ultra-small Micro Pencil Grinding Tools , 2014 .

[140]  J. K. Spelt,et al.  The effects of dilute polymer solution elasticity and viscosity on abrasive slurry jet micro-machining of glass , 2014 .

[141]  J. K. Spelt,et al.  Surface evolution models for abrasive slurry jet micro-machining of channels and holes in glass , 2014 .

[142]  Jian Liu,et al.  Micro-hole drilling and cutting using femtosecond fiber laser , 2014 .

[143]  Che-Hsin Lin,et al.  Rapid soda-lime glass etching process for producing microfluidic channels with higher aspect ratio , 2014 .

[144]  D. Nieto,et al.  Fabrication of microlens arrays on soda-lime glass using a laser direct-write technique and a thermal treatment assisted by a CO2 laser , 2015 .

[145]  S. Prakash,et al.  Fabrication of microchannels: A review , 2015 .

[146]  B. H. Kim,et al.  Experimental investigation of ECDM for fabricating micro structures of quartz , 2015 .

[147]  Shun-Tong Chen,et al.  A force controlled grinding-milling technique for quartz-glass micromachining , 2015 .

[148]  J. K. Spelt,et al.  Abrasive jet machining of channels on highly-curved glass and PMMA surfaces , 2016 .

[149]  H. Qi,et al.  Numerical and experimental study on ultrasonic vibration-assisted micro-channelling of glasses using an abrasive slurry jet , 2016 .

[150]  B. H. Kim,et al.  Surface polishing of quartz-based microfluidic channels using CO2 laser , 2016 .

[151]  M. Park,et al.  Wettability of microstructured Pyrex glass with hydrophobic and hydrophilic properties , 2017 .

[152]  M. Park,et al.  Circuit patterning using laser on transparent material , 2017 .

[153]  J. K. Spelt,et al.  Prediction of the erosive footprint in the abrasive jet micro-machining of flat and curved glass , 2017 .

[154]  A. Dyakonov,et al.  Enhancing Performances of Micro-Grinding of BK-7 Glass through Modification of PCD Micro-Tool , 2017 .

[155]  Y. Cho,et al.  Fabrication of PMMA Acoustophoretic Microfluidic Chip Using Plasma Assisted Bonding , 2017 .

[156]  K. Ashida,et al.  Proposal of laser assisted hot embossing technology for glass , 2018 .

[157]  F. Fang,et al.  Recent advances and challenges of abrasive jet machining , 2018, CIRP Journal of Manufacturing Science and Technology.

[158]  Su Young Choi,et al.  Wetting properties of hybrid structure with hydrophilic ridges and hydrophobic channels , 2018 .