Mechanical Characteristics of Welded Joints of Aluminum Alloy 6061 T6 Formed by Arc and Friction Stir Welding

Butt welds formed by arc welding in inert gas with nonconsumable electrode (tungsten inert gas (TIG) welding) and by friction stir welding (FSW) from aluminum alloy AA6061 T6 are studied. Comparative analysis of the structures and mechanical properties of the welded joints is performed using the results of optical and electron microscopy, tensile tests, tests for residual bending ductility, and measurements of microhardness. The changes in the microstructure in different zones and the degrees of degradation of the mechanical properties after the welding are determined. It is shown that the size of the tool for the friction stir welding affects the properties of the welds. Quantitative results showing the relation between the microscopic behavior of the alloy and the welding-induced changes in the microstructure are obtained. Friction stir welding is shown to provide higher properties of the welds.

[1]  Phil E. Irving,et al.  The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminium joints , 2003 .

[2]  FSW of T joints in overlap configuration: process optimization in joining dissimilar aluminium alloys for the aeronautic application , 2013 .

[3]  C. Muralidharan,et al.  Predicting tensile strength, hardness and corrosion rate of friction stir welded AA6061-T6 aluminium alloy joints , 2011 .

[4]  K. Suzuki,et al.  Joining of 5083 and 6061 aluminum alloys by friction stir welding , 2003 .

[5]  Lawrence E Murr,et al.  Microstructural aspects of the friction-stir welding of 6061-T6 aluminum , 1997 .

[6]  C. Muralidharan,et al.  Establishing Empirical Relationships to Predict Grain Size and Tensile Strength of Friction Stir Welded AA 6061-T6 Aluminium Alloy Joints , 2010 .

[7]  Rajiv S. Mishra,et al.  Friction Stir Welding and Processing , 2007 .

[8]  Livan Fratini,et al.  A continuum based fem model for friction stir welding—model development , 2006 .

[9]  K. Krishnan.  The effect of post weld heat treatment on the properties of 6061 friction stir welded joints , 2002 .

[10]  A. Astarita,et al.  Influence of welding parameters and post-weld aging on tensile properties and fracture location of AA2139-T351 friction-stir-welded joints , 2013 .

[11]  Jau-Wen Lin,et al.  Comparison of mechanical properties of pure copper welded using friction stir welding and tungsten inert gas welding , 2014 .

[12]  E. Nazari,et al.  Tensile behavior of friction stir welded AA 6061-T4 aluminum alloy joints , 2012 .

[13]  Lawrence E Murr,et al.  Tool Forces Developed During Friction Stir Welding , 2013 .

[14]  A. Squillace,et al.  A comparison between FSW and TIG welding techniques: modifications of microstructure and pitting corrosion resistance in AA 2024-T3 butt joints , 2004 .

[15]  Lionel Fourment,et al.  Friction model for friction stir welding process simulation: Calibrations from welding experiments , 2010 .