Comparative Field Performance Study of Flat Plate and Heat Pipe Evacuated Tube Collectors (ETCs) for Domestic Water Heating Systems in a Temperate Climate

This paper presents a year round energy performance monitoring results of two solar water heaters with 4m2 flat plate and 3m2 heat pipe evacuated tube collectors (ETCs)operating under the same weather conditions in Dublin, Ireland. The energy performance of the two systems was compared on daily, monthly and yearly basis. Results obtained showed that for an annual total in-plane solar insolation of 1087kWhm−2, a total of 1984kWh and 2056kWh of heat energy were collected by the 4m2 FPC and 3m2 ETC systems respectively. Over the year, a unit area of the FPC and ETC each generated 496kWhm−2 and 681kWhm−2 of heat respectively. For 3149.7kWh and 3053.6kWh of auxiliary energy supplied to the FPC and ETC systems their annual solar fractions (SFs) were 38.6% and 40.2% respectively. The annual average collector efficiencies were 46.1% and 60.7% while the system efficiencies were 37.9% and 50.3% respectively for the FPC and ETC respectively. Economic analysis showed that both solar water heating (SWH) systems are not economically viable with NPVs ranging between −€4,264 and −€652 while simple payback periods (SPPs) varied between 13 years and 48.5 years.

[1]  Aman Dang,et al.  Performance of flat plate solar collectors in off-south orientation in India , 1983 .

[2]  Seymour Kaplan.  Energy Economics: Quantitative Methods for Energy and Environmental Decisions , 1983 .

[3]  S. Kalogirou.  Thermal performance, economic and environmental life cycle analysis of thermosiphon solar water heaters , 2009 .

[4]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[5]  Pichai Namprakai,et al.  Experimental studies of a new solar water heater system using a solar water pump , 2008 .

[6]  Ashvini Kumar,et al.  Thermal performance of flat-plate solar collectors manufactured in India , 1991 .

[7]  Suhil Kiwan,et al.  Size optimization of conventional solar collectors , 1998 .

[8]  Oscar Cabeza,et al.  Experimental and numerical investigation of a flat-plate solar collector , 2010 .

[9]  Shang-Liang Chen,et al.  Theoretical and experimental investigations of a two-phase thermosyphon solar water heater , 2011 .

[10]  E. Azad,et al.  Theoretical and experimental investigation of heat pipe solar collector , 2008 .

[11]  Enrico Zambolin,et al.  Experimental analysis of thermal performance of flat plate and evacuated tube solar collectors in stationary standard and daily conditions , 2010 .

[12]  Moh’d A. Al-Nimr,et al.  A modified tubeless solar collector partially filled with porous substrate , 1998 .

[13]  S. Kalogirou.  Solar Energy Engineering: Processes and Systems , 2009 .

[14]  S. P Sukhatme,et al.  Solar Energy: Principles of Thermal Collection and Storage , 2009 .

[15]  J. K. Nayak,et al.  Transient method for testing flat-plate solar collectors , 1998 .

[16]  H.M.S. Hussein,et al.  Theoretical and experimental investigation of wickless heat pipes flat plate solar collector with cross flow heat exchanger , 2007 .

[17]  Mahmoud Hammad,et al.  Experimental study of the performance of a solar collector cooled by heat pipes , 1995 .

[18]  Vassilis Belessiotis,et al.  A new heat-pipe type solar domestic hot water system , 2002 .

[19]  G. P. Hammond,et al.  Integrated appraisal of a Solar Hot Water system , 2010 .

[20]  Gilbert M. Masters,et al.  Renewable and Efficient Electric Power Systems , 2004 .

[21]  Wenfeng Gao,et al.  Experimental investigation on thermal performance of thermosyphon flat-plate solar water heater with a mantle heat exchanger , 2010 .