Abstract A concept of instantaneous drying and energy efficiencies has been applied to analyze energy consumption in a through-circulation conveyor dryer and a batch fluid bed dryer for synthetic rubber. It is shown that the energy performance of the conveyor dryer can be improved by leveling of the moisture content distribution across the material layer by mechanical agitation, and sectioning of the air plenum in order to reduce inlet air temperature in the last two sections of the dryer. It is also shown that drying of a synthetic rubber in the fluid bed dryer is more energy-efficient than in the conveyor dryer, especially in the constant-rate period. Thus, the largest energy savings could be obtained in a two-stage dryer comprised of the plug-flow fluid bed dryer, and the belt conveyor dryer for removal of the bulk and residual water, respectively. #© Her Majesty the Queen in Right of Canada, as represented by the Minister of Natural Resources, 2004.