In vivo evaluation of a MPC polymer coated continuous flow left ventricular assist system.
暂无分享,去创建一个
Mitsuo Umezu | Jun Tomioka | Bartley P Griffith | Hitoshi Koyanagi | Kenji Yamazaki | Hiromi Kurosawa | Marina V Kameneva | Robert L Kormos | Philip Litwak | B. Griffith | H. Koyanagi | K. Litwak | K. Yamazaki | R. Kormos | M. Kameneva | M. Umezu | S. Kihara | P. Litwak | T. Akimoto | O. Tagusari | J. Tomioka | H. Kurosawa | Shin'ichiro Kihara | Kenneth N Litwak | Hiroyuki Ushiyama | Toshimasa Tokuno | David C Borzelleca | Osamu Tagusari | Takehide Akimoto | D. Borzelleca | H. Ushiyama | T. Tokuno
[1] R K Jarvik,et al. Research and development of an implantable, axial-flow left ventricular assist device: the Jarvik 2000 Heart. , 2001, The Annals of thoracic surgery.
[2] N Nakabayashi,et al. Reduced thrombogenicity of polymers having phospholipid polar groups. , 1990, Journal of biomedical materials research.
[3] K. Ishihara,et al. Chemical modification of silk fibroin with 2-methacryloyloxyethyl phosphorylcholine. II. Graft-polymerization onto fabric through 2-methacryloyloxyethyl isocyanate and interaction between fabric and platelets. , 2000, Biomaterials.
[4] T. Myers,et al. A comparison between intraperitoneal and extraperitoneal left ventricular assist system placement. , 1996, ASAIO journal.
[5] Y. Fukui,et al. Engineering analysis of diamond-like carbon coated polymeric materials for biomedical applications. , 2000, Artificial organs.
[6] S. Endo,et al. Morphologic Changes of the Aortic Wall Due to Reduced Systemic Pulse Pressure in Prolonged Non Pulsatile Left Heart Bypass , 1997, ASAIO journal.
[7] K. Ishihara,et al. Hemocompatible cellulose dialysis membranes modified with phospholipid polymers. , 1995, Artificial organs.
[8] E Wolner,et al. Lessons learned from the first clinical implants of the DeBakey ventricular assist device axial pump: a single center report. , 2001, The Annals of thoracic surgery.
[9] P. Havlík,et al. Cora rotary pump for implantable left ventricular assist device: biomaterial aspects. , 1997, Artificial organs.
[10] D J Burke,et al. The Heartmate II: design and development of a fully sealed axial flow left ventricular assist system. , 2001, Artificial organs.
[11] N Nakabayashi,et al. Inhibition of fibroblast cell adhesion on substrate by coating with 2-methacryloyloxyethyl phosphorylcholine polymers. , 1999, Journal of biomaterials science. Polymer edition.
[12] H. Scheld,et al. Emergency versus elective/urgent left ventricular assist device implantation. , 1998, The Journal of heart and lung transplantation : the official publication of the International Society for Heart Transplantation.
[13] Kazuhiko Ishihara,et al. Preparation of Phospholipid Polylners and Their Properties as Polymer Hydrogel Membranes , 1990, Polymer Journal.
[14] B. Griffith,et al. Chronic animal health assessment during axial ventricular assistance: importance of hemorheologic parameters. , 1999, ASAIO journal.
[15] J F Antaki,et al. An implantable centrifugal blood pump with a recirculating purge system (Cool-Seal system). , 1998, Artificial organs.
[16] O H Frazier,et al. Multicenter clinical evaluation of the HeartMate 1000 IP left ventricular assist device. , 1992, The Annals of thoracic surgery.
[17] K. Ishihara. New polymeric biomaterials-phospholipid polymers with a biocompatible surface. , 2000, Frontiers of medical and biological engineering : the international journal of the Japan Society of Medical Electronics and Biological Engineering.
[18] M C Oz,et al. Time-dependent cellular population of textured-surface left ventricular assist devices contributes to the development of a biphasic systemic procoagulant response. , 1999, The Journal of thoracic and cardiovascular surgery.