Anodic titania nanotubes grown on titanium tubular electrodes.

In the past decade, research into growth and application of anodic titania nanotubes has been focused on planar titanium electrodes. Although patterned, curved, or cylindrical substrates were also employed in a number of applications, the study of nanotubes grown on a titanium tubular electrode is rather inadequate, despite their expected uses in thermal fluids. In this study, growth of titania nanotubes on tubular electrodes was investigated. It was found that nanotubes are formed at both outer and inner surfaces of the electrode. The nanotube length (or growth rate in the first 30 min) at the outer surface decreases gradually from the side facing the cathode to that at the other side, while the length at the inner surface smears out this trend. This is due to the effect of the electric field emanating from the potential drop in the organic electrolyte. The variation of nanotube diameter just echoes such a tendency of potential drop. The influence of electrode orientation during anodization on the resulting features of nanotubes was also examined and discussed. The nanotube geometry is thus tailorable for particular applications.

[1]  Craig A Grimes,et al.  Enhanced photocleavage of water using titania nanotube arrays. , 2005, Nano letters.

[2]  Craig A. Grimes,et al.  Unprecedented ultra-high hydrogen gas sensitivity in undoped titania nanotubes , 2006 .

[3]  Craig A Grimes,et al.  Use of highly-ordered TiO(2) nanotube arrays in dye-sensitized solar cells. , 2006, Nano letters.

[4]  P. Schmuki,et al.  Bamboo-type TiO2 nanotubes: improved conversion efficiency in dye-sensitized solar cells. , 2008, Journal of the American Chemical Society.

[5]  Craig A. Grimes,et al.  The effect of electrolyte composition on the fabrication of self-organized titanium oxide nanotube arrays by anodic oxidation , 2005 .

[6]  Conformal growth of anodic nanotubes for dye-sensitized solar cells: part II. Nonplanar electrode. , 2012, Journal of nanoscience and nanotechnology.

[7]  Craig A. Grimes,et al.  Backside illuminated dye-sensitized solar cells based on titania nanotube array electrodes , 2006 .

[8]  Craig A. Grimes,et al.  Titanium oxide nanotube arrays prepared by anodic oxidation , 2001 .

[9]  Xiaodong He,et al.  Effect of electric field strength on the length of anodized titania nanotube arrays , 2009 .

[10]  Marc Aucouturier,et al.  Anodic oxidation of titanium and TA6V alloy in chromic media. An electrochemical approach , 1999 .

[11]  Zhiqun Lin,et al.  Anisotropic thermal transport in highly ordered TiO2 nanotube arrays , 2009 .

[12]  Wei-min Liu,et al.  Microstructured Arrays of TiO2 Nanotubes for Improved Photo‐Electrocatalysis and Mechanical Stability , 2009 .

[13]  Craig A. Grimes,et al.  Anodic Growth of Highly Ordered TiO2 Nanotube Arrays to 134 μm in Length , 2006 .

[14]  A. J. Frank,et al.  Removing structural disorder from oriented TiO2 nanotube arrays: reducing the dimensionality of transport and recombination in dye-sensitized solar cells. , 2007, Nano letters.

[15]  Feng Zhou,et al.  Engineering a Titanium Surface with Controllable Oleophobicity and Switchable Oil Adhesion , 2010 .

[16]  X. W. Sun,et al.  A novel parallel configuration of dye-sensitized solar cells with double-sided anodic nanotube arrays , 2011 .

[17]  Kai Wu,et al.  Highly efficient and completely flexible fiber-shaped dye-sensitized solar cell based on TiO2 nanotube array. , 2012, Nanoscale.

[18]  Craig A. Grimes,et al.  Highly-ordered TiO2 nanotube arrays up to 220 µm in length: use in water photoelectrolysis and dye-sensitized solar cells , 2007 .

[19]  T. Hotokebuchi,et al.  Plate, wire, mesh, microsphere, and microtube composed of sodium titanate nanotubes on a titanium metal template. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[20]  Sungho Jin,et al.  Extreme superomniphobicity of multiwalled 8 nm TiO2 nanotubes. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[21]  G. Thompson,et al.  Porous anodic alumina: fabrication, characterization and applications , 1997 .

[22]  Patrik Schmuki,et al.  TiO2 nanotubes : Tailoring the geometry in H3PO4/HF electrolytes , 2006 .

[23]  J. Macák,et al.  250 µm long anodic TiO2 nanotubes with hexagonal self‐ordering , 2007 .

[24]  Craig A. Grimes,et al.  A new benchmark for TiO2 nanotube array growth by anodization , 2007 .

[25]  Yangxiang Li,et al.  Fabrication of titania nanotube arrays on curved surface , 2008 .

[26]  Kai Wu,et al.  A cylindrical core-shell-like TiO2 nanotube array anode for flexible fiber-type dye-sensitized solar cells , 2011, Nanoscale research letters.

[27]  Y. Liu,et al.  Towards a tunable and switchable water adhesion on a TiO(2) nanotube film with patterned wettability. , 2009, Chemical communications.

[28]  Xinyuan Xia,et al.  Single-wire dye-sensitized solar cells wrapped by carbon nanotube film electrodes. , 2011, Nano letters.

[29]  Craig A. Grimes,et al.  Extreme Changes in the Electrical Resistance of Titania Nanotubes with Hydrogen Exposure , 2003 .

[30]  Mano Misra,et al.  Dye-sensitized photovoltaic wires using highly ordered TiO2 nanotube arrays. , 2010, ACS nano.

[31]  Bo Chen,et al.  Influence of patterned concave depth and surface curvature on anodization of titania nanotubes and alumina nanopores. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[32]  S. Bauer,et al.  Amphiphilic TiO2 nanotube arrays: an actively controllable drug delivery system. , 2009, Journal of the American Chemical Society.

[33]  Kai Zhu,et al.  Enhanced charge-collection efficiencies and light scattering in dye-sensitized solar cells using oriented TiO2 nanotubes arrays. , 2007, Nano letters.

[34]  Xiaoming Huang,et al.  Highly efficient fibrous dye-sensitized solar cells based on TiO2 nanotube arrays , 2011, Nanotechnology.

[35]  Xiao-yan Wang,et al.  Double-sided anodic titania nanotube arrays: a lopsided growth process. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[36]  Jan M. Macak,et al.  Anodic growth of self-organized anodic TiO2 nanotubes in viscous electrolytes , 2006 .

[37]  X. W. Sun,et al.  Transition from anodic titania nanotubes to nanowires: arising from nanotube growth to application in dye-sensitized solar cells. , 2011, Chemphyschem : a European journal of chemical physics and physical chemistry.

[38]  Craig A. Grimes,et al.  TiO2 Nanotube Arrays of 1000 μm Length by Anodization of Titanium Foil: Phenol Red Diffusion , 2007 .