Misalignment effect on gearbox failure: An experimental study

[1]  B. Fitzsimmons,et al.  Contaminated Lubricants and Tapered Roller Bearing Wear , 1977 .

[2]  P. D. McFadden,et al.  Model for the vibration produced by a single point defect in a rolling element bearing , 1984 .

[3]  P. D. McFadden,et al.  The vibration produced by multiple point defects in a rolling element bearing , 1985 .

[4]  Y.-T. Su,et al.  On initial fault detection of a tapered roller bearing: Frequency domain analysis , 1992 .

[5]  A. S. Sekhar,et al.  Effects of coupling misalignment on vibrations of rotating machinery , 1995 .

[6]  D. Townsend,et al.  Analysis of the effects of surface pitting and wear on the vibration of a gear transmission system , 1996 .

[7]  Jorge H.O. Seabra,et al.  Scuffing and lubricant film breakdown in FZG gears. Part I. Analytical and experimental approach , 1998 .

[8]  Chong-Won Lee,et al.  Modelling and Vibration Analysis of Misaligned Rotor-Ball Bearing Systems , 1999 .

[9]  M. Farid Golnaraghi,et al.  Assessment of Gear Damage Monitoring Techniques Using Vibration Measurements , 2001 .

[10]  I. Redmond,et al.  DYNAMIC RESPONSE OF TWO ROTORS CONNECTED BY RIGID MECHANICAL COUPLING WITH PARALLEL MISALIGNMENT , 2002 .

[11]  Robert J.K. Wood,et al.  Electrostatic wear monitoring of rolling element bearings , 2007 .

[12]  Arthur W. Lees,et al.  Misalignment in rigidly coupled rotors , 2007 .

[13]  Zhipeng Feng,et al.  Application of atomic decomposition to gear damage detection , 2007 .

[14]  Amiya R Mohanty,et al.  Model based fault diagnosis of a rotor–bearing system for misalignment and unbalance under steady-state condition , 2009 .

[15]  Terry J. Harvey,et al.  Advanced condition monitoring of tapered roller bearings, Part 1 , 2009 .

[16]  Tejas H. Patel,et al.  Experimental investigations on vibration response of misaligned rotors , 2009 .

[17]  Hui Li,et al.  Gear fault detection and diagnosis under speed-up condition based on order cepstrum and radial basis function neural network , 2009 .

[18]  S. Swarnamani,et al.  Experimental studies on the effects of reduction in gear tooth stiffness and lubricant film thickness in a spur geared system , 2009 .

[19]  J. Rafiee,et al.  Application of mother wavelet functions for automatic gear and bearing fault diagnosis , 2010, Expert Syst. Appl..

[20]  Hao Tian,et al.  A new feature extraction and selection scheme for hybrid fault diagnosis of gearbox , 2011, Expert Syst. Appl..

[21]  A. S. Sekhar,et al.  Identification of unbalance in a rotor bearing system , 2011 .

[22]  F. Choy,et al.  Vibration Signature Analysis and Parameter Extractions on Damages in Gears and Rolling Element Bearings , 2011 .

[23]  Paolo Pennacchi,et al.  Nonlinear effects caused by coupling misalignment in rotors equipped with journal bearings , 2012 .

[24]  T. Y. Wu,et al.  Characterization of gear faults in variable rotating speed using Hilbert-Huang Transform and instantaneous dimensionless frequency normalization , 2012 .

[25]  I. R. Praveen Krishna,et al.  Detection and diagnosis of surface wear failure in a spur geared system using EEMD based vibration signalanalysis , 2013 .

[26]  Liu Hong,et al.  A time domain approach to diagnose gearbox fault based on measured vibration signals , 2014 .

[27]  M. Amarnath,et al.  Assessment of surface contact fatigue failure in a spur geared system based on the tribological and vibration parameter analysis , 2015 .

[28]  Khanh T.P. Nguyen,et al.  Health monitoring of bearing and gear faults by using a new health indicator extracted from current signals , 2019, Measurement.

[29]  Muhammad Tariq,et al.  Gear misalignment diagnosis using statistical features of vibration and airborne sound spectrums , 2019, Measurement.

[30]  Harish Hirani,et al.  Effect of gear misalignment on contact area: Theoretical and experimental studies , 2019, Measurement.

[31]  Jiawei Xiang,et al.  Latest developments in gear defect diagnosis and prognosis: A review , 2020 .

[32]  Surajkumar G. Kumbhar,et al.  Distributed fault diagnosis of rotor-bearing system using dimensional analysis and experimental methods , 2020 .

[33]  P. V. Kane,et al.  Critical evaluation and comparison of psychoacoustics, acoustics and vibration features for gear fault correlation and classification , 2020 .

[34]  Xin Li,et al.  An early fault diagnosis method of gear based on improved symplectic geometry mode decomposition , 2020 .