Seawater immersion ageing of glass-fibre reinforced polymer laminates for marine applications

Abstract Four glass-fibre reinforced polymer (GRP) materials along with castings of their matrix resins have been aged in seawater in the laboratory, some loaded under set-strain. Water uptake behaviour has been compared for the polyester, phenolic and vinylester GRPs and neat resin castings, and losses in mechanical properties determined for the GRPs. The phenolic GRP displayed anomalous uptake behaviour considered to relate to both interface and matrix absorption. Water uptake by the polyester and vinylester laminates appeared to be affected initially by suppression from fibre barrier effects then later by enhancement from interface effects. Flexural strength fell by 15–21% for the water saturated polyester and vinylester GRPs, and by 25% for the phenolic GRP. Loading at 20% of ultimate strain while under immersion exacerbated only the phenolic laminate degradation, advancing the loss in strength to 36%. Interlaminar shear strengths fell by between 12 and 21% for the GRPs at close to saturation.

[1]  G. Pritchard,et al.  The use of water absorption kinetic data to predict laminate property changes , 1987 .

[2]  D. M. Turley,et al.  Flammability of GRP for use in ship superstructures , 1994 .

[3]  Antonio Apicella,et al.  The water ageing of unsaturated polyester-based composites: influence of resin chemical structure , 1983 .

[4]  M. J. Scudamore,et al.  Fire performance studies on glass-reinforced plastic laminates , 1994 .

[5]  G. Springer,et al.  Moisture Absorption and Desorption of Composite Materials , 1976 .

[6]  J. Thomason.  The interface region in glass fibre-reinforced epoxy resin composites: 2. Water absorption, voids and the interface , 1995 .

[7]  John Crank,et al.  Diffusion in polymers , 1968 .

[8]  Maurice F. Amateau,et al.  Effects of Seawater Immersion on the Impact Resistance of Glass Fiber Reinforced Epoxy Composites , 1992 .

[9]  Usman Sorathia,et al.  Residual Strength of Composites during and after Fire Exposure , 1993 .

[10]  K. U. Snowden,et al.  The calculation of the relaxed creep strain in four-point bending tests , 1997 .

[11]  Y. Weitsman,et al.  A simple graphical method for determining diffusion parameters for two-stage sorption in composites , 1994 .

[12]  G. Verchery,et al.  Durability of polymer based composite systems for structural applications , 1991 .

[13]  M. Found,et al.  The effects of water absorption on a polyester/chopped strand mat laminate , 1983 .

[14]  Christopher W. Cable,et al.  The Effect of Defects in Glass-Reinforced Plastic (GRP) , 1991 .

[15]  Water absorption of glass/epoxy laminates under bending stresses , 1983 .

[16]  P. Bonniau,et al.  A Comparative Study of Water Absorption Theories Applied to Glass Epoxy Composites , 1981 .

[17]  A. G. Gibson,et al.  Fire performance of composite panels for large marine structures , 1995 .

[18]  G. Springer,et al.  Moisture Absorption of Graphite-Epoxy Composites Immersed in Liquids and in Humid Air , 1979 .

[19]  C. S. Smith,et al.  Design of Marine Structures in Composite Materials , 1990 .

[20]  J. Whitney,et al.  A Four-Point Shear Test for Graphite/Epoxy Composites , 1983 .

[21]  A. Lagrange,et al.  Influence of Various Stress Conditions of The Moisture Diffusion of Composites in Distilled Water and in Natural Sea-Water , 1991 .

[22]  R. C. Wyatt,et al.  Water damage in glass fibre/resin composites , 1969, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[23]  J. Lucas,et al.  The effects of sorbed moisture on resin-matrix composites , 1993 .