Conversion of refinery natural purge gases to liquid hydrocarbons in GTL loop with hydrogen-permselective membranes: An alternative to gas flaring

Abstract One of the main issues facing mankind in this century is the global warming which is induced by the increasing concentration of carbon dioxide and other greenhouse gases in the atmosphere. A promising process for controlling the atmospheric CO 2 level is prevention of combustion in flares. In the present work, a novel GTL loop is proposed to convert the natural gas wasted by a gas refinery to higher molecular weight hydrocarbons. The process proposes an alternative method instead of conventional gas - burning flares, aims to minimize CO 2 emissions and produce liquid fuel such as gasoline. For this purpose, purged natural gas is converted to synthesis gas in a novel hydrogen - permselective membrane reactor with recycle stream and then it is converted to liquid fuel in Fischer - Tropsch membrane reactor. In this configuration, a loop is constructed by returning and mixing a portion of the product with the original feed through a recycle stream. This approach produces large amounts of higher molecular weight hydrocarbons, hydrogen production and decreases environmental impacts owing to purge gases emission. The simulation results of the aforesaid loop, show decrease in CO 2 emission rate with a value of 1/10 to that of flaring with production of 0.018 kgmol/s of hydrogen and more than 90 barrels per day of heavy fraction hydrocarbons containing gasoline and butane fraction for a specified value of (about 4 MMscfd) purge gases.

[1]  G. Schaub,et al.  Synthetic hydrocarbon fuels and CO2 utilization , 2004 .

[2]  Rajamani Krishna,et al.  Modelling of a bubble column slurry reactor for Fischer Tropsch synthesis , 1999 .

[3]  N. Itoh,et al.  A membrane reactor using palladium , 1987 .

[4]  Bernard P. A. Grandjean,et al.  Methane steam reforming in asymmetric Pd- and Pd-Ag/porous SS membrane reactors , 1994 .

[5]  Akira Endo,et al.  Simulation of a Porous Ceramic Membrane Reactor for Hydrogen Production , 2005 .

[6]  Jie Chang,et al.  Kinetic Model of Product Distribution over Fe Catalyst for Fischer−Tropsch Synthesis† , 2009 .

[7]  Giuseppe Barbieri,et al.  Simulation of the methane steam re-forming process in a catalytic Pd-membrane reactor , 1997 .

[8]  Thijs Peters,et al.  High pressure performance of thin Pd–23%Ag/stainless steel composite membranes in water gas shift gas mixtures; influence of dilution, mass transfer and surface effects on the hydrogen flux , 2008 .

[9]  Dominique Richon,et al.  Development of a New Alpha Function for the Peng–Robinson Equation of State: Comparative Study of Alpha Function Models for Pure Gases (Natural Gas Components) and Water-Gas Systems , 2004 .

[10]  D. Peng,et al.  A New Two-Constant Equation of State , 1976 .

[11]  S. Tosti,et al.  Co-current and counter-current configurations for ethanol steam reforming in a dense Pd–Ag membrane reactor , 2008 .

[12]  Payam Parvasi,et al.  Incorporation of Dynamic Flexibility in the Design of a Methanol Synthesis Loop in the Presence of Catalyst Deactivation , 2008 .

[13]  Mohammad Reza Rahimpour,et al.  Enhancement of carbon dioxide removal in a hydrogen-permselective methanol synthesis reactor , 2009 .

[14]  G. Froment,et al.  Methane steam reforming, methanation and water‐gas shift: I. Intrinsic kinetics , 1989 .

[15]  M. Rahimpour,et al.  Modeling and simulation of ammonia removal from purge gases of ammonia plants using a catalytic Pd-Ag membrane reactor. , 2008, Journal of hazardous materials.

[16]  Mohammad Reza Rahimpour,et al.  Enhancement of gasoline production in a novel hydrogen- permselective membrane reactor in Fischer-Tropsch synthesis of GTL technology , 2009 .

[17]  Morteza Sohrabi,et al.  Fischer‐Tropsch Synthesis: Modeling and Performance Study for Fe‐HZSM5 Bifunctional Catalyst , 2005 .

[18]  Payam Parvasi,et al.  Dynamic modeling and optimization of a novel methanol synthesis loop with hydrogen-permselective membrane reactor , 2009 .

[19]  Fabiano A.N. Fernandes,et al.  Methane steam reforming modeling in a palladium membrane reactor , 2006 .

[20]  Yutaek Seo,et al.  A highly effective and stable nano-sized Ni/MgO–Al2O3 catalyst for gas to liquids (GTL) process , 2008 .

[21]  Asterios Gavriilidis,et al.  Catalytic combustion assisted methane steam reforming in a catalytic plate reactor , 2003 .

[22]  Signe Kjelstrup,et al.  Exergy Analysis of a GTL Process Based on Low-Temperature Slurry F-T Reactor Technology with a Cobalt Catalyst , 2007 .

[23]  M. Rohde,et al.  Membrane application in Fischer–Tropsch synthesis reactors—Overview of concepts , 2005 .

[24]  J. Smith,et al.  Introduction to chemical engineering thermodynamics , 1949 .

[25]  M. M. Montazer Rahmati,et al.  RATE EQUATIONS FOR THE FISCHER-TROPSCH REACTION ON A PROMOTED IRON CATALYST , 2001 .

[26]  J. M. Smith.  Chemical Engineering Kinetics , 1980 .

[27]  Wen-Ping Ma,et al.  Kinetics modelling of Fischer–Tropsch synthesis over an industrial Fe–Cu–K catalyst☆ , 2003 .

[28]  Jtf Jos Keurentjes,et al.  Measurement and modeling of hydrogen transport through high-flux Pd membranes , 2007 .

[29]  Shigeki Hara,et al.  Kinetics and hydrogen removal effect for methanol decomposition , 1999 .

[30]  M. Rohde,et al.  Improving carbon utilization in biomass conversion to synthetic Studies in Surface Science and Catalysishydrocarbons via Fischer-Tropsch synthesis , 2004 .