These days passive microwave (MW) remote sensing has found many applications. For example, in Earth observation missions, it is possible to estimate the salinity of oceans, the soil moisture of landscapes, or to extract atmospheric parameters like the liquid water content of clouds [1, 2, 3]. Due to the penetration capabilities of microwaves through many dielectric materials, and the purely passive character of this kind of remote sensing, this technique nowadays is considered as well in many security and reconnaissance applications (e.g. observation of sensitive areas, detection of concealed objects, trough-wall imaging, etc.). Presently different imaging principles for MW radiometry are possible. Most of them still are based on pure mechanical scanning or they combine this with electronic scanning by using parts of a focal plane array [4]. Due to many advantages, the technological trend is going towards fully-electronic beam steering or two-dimensional focal plane arrays. These systems are able to achieve high frame rates, but they are still very expensive because of a significantly higher number of receiver modules, compared to a mechanical scanning system. In our approach a novel concept for a Ka band fully-electronic wide swath MW imaging radiometer system is introduced [5]. It is based on a combination of beam steering by frequency shift for one scanning direction using a slotted-waveguide antenna, and the application of aperture synthesis in the other. In the following a proof of concept is outlined using a two-element interferometer system called VESAS (Voll elektronischer Scanner mit Apertursynthese) demonstrator. The advantage of using the aperture synthesis technique is the possibility to implement minimal redundant sparse arrays without a degradation of the antenna pattern. In combination with the beam steering by frequency shift, one requires a one dimensional receiver/antenna array for a two dimensional imaging, hence a low-cost, fully-electronic wide swath microwave radiometer system with high frame rates is feasible. In the following a proof of concept is outlined by presenting different MW imaging measurement results, using this kind of imaging principle.
[1]
Duncan A. Robertson,et al.
Mechanically scanned real-time passive millimeter-wave imaging at 94 GHz
,
2003,
SPIE Defense + Commercial Sensing.
[2]
David M. Le Vine,et al.
The sensitivity of synthetic aperture radiometers for remote sensing applications from space
,
1990
.
[3]
Markus Peichl,et al.
First design investigations on a fully-electronic microwave imaging radiometer system
,
2009,
2009 German Microwave Conference.
[4]
Yann Kerr,et al.
SMOS: The Mission and the System
,
2008,
IEEE Transactions on Geoscience and Remote Sensing.
[5]
C. Ruf.
Numerical annealing of low-redundancy linear arrays
,
1993
.
[6]
D. M. Le Vine,et al.
Synthetic aperture radiometer systems
,
1999,
IMS 1999.
[7]
A. F. Stevenson.
Theory of Slots in Rectangular Wave‐Guides
,
1948
.
[8]
Markus Peichl,et al.
Status of VESAS: a fully-electronic microwave imaging radiometer system
,
2010,
Defense + Commercial Sensing.
[9]
Markus Peichl,et al.
Microwave imaging of the brightness temperature distribution of extended areas in the near and far field using two‐dimensional aperture synthesis with high spatial resolution
,
1998
.
[10]
Simon Anger,et al.
Design of an integrated Ka band receiver module for passive microwave imaging systems
,
2011,
2011 Semiconductor Conference Dresden.
[11]
Richard K. Moore,et al.
Microwave Remote Sensing - Active and Passive - Volume I - Microwave Remote Sensing Fundamentals and Radiometry
,
1981
.