Robust PID controller design via LMI approach

Abstract In this paper, a method which allows explicit incorporation of the description of system uncertainties in the problem formulation for designing robust proportional-integal-derivative (PID) controller is presented. The multiple-model paradigm is employed to represent the uncertainties and provides the basis for the PID controller design. Using standard techniques, the robust PID controller design is reduced to a convex constraint problem which can be efficiently solved with linear matrix inequalities (LMIs) approach. Various practical specifications are considered simultaneously within this framework. Extension to system with time-delays, which follows naturally from the preceding development, is also discussed. Two examples are used to demonstrate the effectiveness of the proposed method and a comparison with the existing PID tuning methods is made.

[1]  Min-Sen Chiu,et al.  Internal model control design for transition control , 2000 .

[2]  C. Hang,et al.  Refinements of the Ziegler-Nichols tuning formula , 1991 .

[3]  Min-Sen Chiu,et al.  An extended self-organizing map for nonlinear system identification , 2000 .

[4]  P. Gahinet,et al.  H∞ design with pole placement constraints: an LMI approach , 1996, IEEE Trans. Autom. Control..

[5]  Kumpati S. Narendra,et al.  Adaptation and learning using multiple models, switching, and tuning , 1995 .

[6]  Frank L. Lewis,et al.  Optimal Control , 1986 .

[7]  Stephen P. Boyd,et al.  Linear Matrix Inequalities in Systems and Control Theory , 1994 .

[8]  Y. Arkun,et al.  Estimation of nonlinear systems using linear multiple models , 1997 .

[9]  D. Seborg,et al.  Control strategy for single-input single-output non-linear systems with time delays , 1988 .

[10]  Cheng-Ching Yu,et al.  Nonlinear process control using multiple models : Relay feedback approach , 2000 .

[11]  Jay H. Lee,et al.  Dynamically scheduled MPC of nonlinear processes using hinging hyperplane models , 1998 .

[12]  Dale E. Seborg,et al.  Application of a general multi-model approach for identification of highly nonlinear processes-a case study , 1993 .

[13]  H. Kaufman,et al.  Multiple-model adaptive predictive control of mean arterial pressure and cardiac output , 1992, IEEE Transactions on Biomedical Engineering.

[14]  T. Johansen,et al.  Constructing NARMAX models using ARMAX models , 1993 .

[15]  Sunwon Park,et al.  PID controller tuning for desired closed‐loop responses for SI/SO systems , 1998 .

[16]  Tor Arne Johansen,et al.  Identification of non-linear system structure and parameters using regime decomposition , 1995, Autom..

[17]  P. Gahinet,et al.  A linear matrix inequality approach to H∞ control , 1994 .

[18]  Pascal Gahinet,et al.  H/sub /spl infin// design with pole placement constraints: an LMI approach , 1994, Proceedings of 1994 33rd IEEE Conference on Decision and Control.

[19]  Tong Heng Lee,et al.  PI Tuning in Terms of Gain and Phase Margins , 1998, Autom..

[20]  Hsueh-Chia Chang,et al.  A theoretical examination of closed-loop properties and tuning methods of single-loop PI controllers , 1987 .

[21]  Minyue Fu,et al.  Delay-dependent closed-loop stability of linear systems with input delay: an LMI approach , 1997, Proceedings of the 36th IEEE Conference on Decision and Control.

[22]  Cheng-Liang Chen,et al.  A simple method for on‐line identification and controller tuning , 1989 .

[23]  Tor Arne Johansen,et al.  Design and analysis of gain-scheduled control using local controller networks , 1997 .

[24]  Evanghelos Zafiriou,et al.  Robust process control , 1987 .

[25]  R. Braatz,et al.  A tutorial on linear and bilinear matrix inequalities , 2000 .

[26]  George W. Irwin,et al.  Direct neural model reference adaptive control , 1995 .

[27]  Stephen P. Boyd,et al.  Linear controller design: limits of performance , 1991 .

[28]  S. Niculescu.  H∞ memoryless control with an α-stability constraint for time-delay systems: an LMI approach , 1998, IEEE Trans. Autom. Control..

[29]  William L. Luyben,et al.  Process Modeling, Simulation and Control for Chemical Engineers , 1973 .