Material and geometrical characteristics of structural steels based on statistical analysis of metallurgical products

Abstract The experimental research results of material and geometrical characteristics of Czech steel are given in the presented paper. Measurements are carried out for the yield strength of plates made of steel grade S355. The values measured are used to compute axial resistances which are compared with the resistance resulting from standard (nominal) values. In this paper, there was used a statistical information for evaluating the results of strength measurements on a series of plates and hot‐rolled profiles under tension to determine the adequate partial γM0 safety factor.

[1]  Dan M. Frangopol,et al.  Use of Monitoring Extreme Data for the Performance Prediction of Structures: General Approach , 2008 .

[2]  Dan M. Frangopol,et al.  Use of monitoring extreme data for the performance prediction of structures: Bayesian updating , 2008 .

[3]  Algirdas Juozapaitis,et al.  Determination of Rational Parameters for the Advanced Structure of a Pedestrian Suspension Steel Bridge , 2007 .

[4]  Christian Hellmich,et al.  Computational mechanics of materials and structures , 2009 .

[5]  Zdeněk Kala.  Sensitivity analysis of the stability problems of thin-walled structures , 2005 .

[6]  Zdenìk Kala,et al.  RESPECTING THE INFLUENCE OF GEOMETRICAL AND MATERIAL IMPERFECTIONS OF STEEL BEAM WHEN CALCULATING THEIR LOAD-CARRYING CAPACITY , 2002 .

[7]  Konrad Bergmeister,et al.  Technologische Eigenschaften von Stählen im europäischen Vergleich , 2006 .

[8]  Algirdas Juozapaitis,et al.  Static behaviour analysis of masts with combined guys , 2007 .

[9]  Zdeněk Kala,et al.  Sensitivity assessment of steel members under compression , 2009 .

[10]  Zdeněk Kala,et al.  Fuzzy probability analysis of the fatigue resistance of steel structural members under bending , 2008 .

[11]  H. Gulvanessian,et al.  EN1990 Eurocode—Basis of structural design , 2001 .

[12]  József Szalai,et al.  On the probabilistic evaluation of the stability resistance of steel columns and beams , 2009 .

[13]  Herbert A. Mang.  On contemporary computational mechanics , 2009 .

[14]  Algirdas Juozapaitis,et al.  Shape Stabilization of Steel Suspension Bridge , 2008 .

[15]  Herbert A. Mang,et al.  Hilltop buckling as the A and O in sensitivity analysis of the initial postbuckling behavior of elastic structures , 2009 .

[16]  Algirdas Juozapaitis,et al.  Mast behaviour analysis and peculiarities of numerical modelling , 2008 .

[17]  Milan Holický,et al.  Design characteristics of structural steels based on statistical analysis of metallurgical products , 2004 .

[18]  Zdeněk Kala.  Stability problems of steel structures in the presence of stochastic and fuzzy uncertainty , 2007 .

[19]  Gintaris Kaklauskas,et al.  Shrinkage influence on tension stiffening in concrete members , 2009 .

[20]  Gintaris Kaklauskas,et al.  A new steel structural system of a suspension pedestrian bridge , 2006 .

[21]  Zdeněk Kala.  Sensitivity Analysis of Carrying Capacity of Steel Plane Frames to Imperfections , 2008 .

[22]  Arnoldas Norkus,et al.  Optimization of geometrically nonlinear elastic-plastic structures under stiffness constraints , 2001 .

[23]  Arnoldas Norkus,et al.  Truss optimization under stiffness, stability constraints and random loading , 2006 .