Improved Air Processability of Organic Photovoltaics Using a Stabilizing Antioxidant to Prevent Thermal Oxidation

[1]  C. Brabec,et al.  Organic photovoltaic modules with new world record efficiencies , 2020, Progress in Photovoltaics: Research and Applications.

[2]  Yinhua Zhou,et al.  Photocatalytic effect of ZnO on the stability of nonfullerene acceptors and its mitigation by SnO2 for nonfullerene organic solar cells , 2019, Materials Horizons.

[3]  F. Liu,et al.  An Unfused‐Core‐Based Nonfullerene Acceptor Enables High‐Efficiency Organic Solar Cells with Excellent Morphological Stability at High Temperatures , 2018, Advanced materials.

[4]  L. Fernandes,et al.  Thermal stability of low-bandgap copolymers PTB7 and PTB7-Th and their bulk heterojunction composites , 2018, Polymer Bulletin.

[5]  Christoph J. Brabec,et al.  Suppressing photooxidation of conjugated polymers and their blends with fullerenes through nickel chelates , 2017 .

[6]  E. Speller,et al.  The significance of fullerene electron acceptors in organic solar cell photo-oxidation , 2017 .

[7]  L. Lüer,et al.  Stability of Organic Solar Cells: The Influence of Nanostructured Carbon Materials , 2017 .

[8]  C. Brabec,et al.  Suppression of Thermally Induced Fullerene Aggregation in Polyfullerene-Based Multiacceptor Organic Solar Cells. , 2017, ACS applied materials & interfaces.

[9]  H. Rubahn,et al.  Long-term stabilization of organic solar cells using hydroperoxide decomposers as additives , 2016 .

[10]  N. Tudorachi,et al.  Thermal and thermo-oxidative stability and probable degradation mechanism of some polyetherimides , 2016 .

[11]  C. Brabec,et al.  Morphological and electrical control of fullerene dimerization determines organic photovoltaic stability , 2016 .

[12]  Yasumasa Suzuki,et al.  Photooxidation studies on indene-C60 adducts , 2015 .

[13]  A. Akpo,et al.  Comparison of degradation mechanisms in organic photovoltaic devices upon exposure to a temperate and a subequatorial climate , 2015 .

[14]  S. M. Abdullah,et al.  The Impact of Thermal Annealing to the Efficiency and Stability of Organic Solar Cells based on PCDTBT: PC71BM , 2015 .

[15]  Christoph J. Brabec,et al.  The effect of oxygen induced degradation on charge carrier dynamics in P3HT:PCBM and Si-PCPDTBT:PCBM thin films and solar cells , 2015 .

[16]  A. Tournebize,et al.  Photostability of organic materials used in polymer solar cells , 2014 .

[17]  Liping Zhao,et al.  Thermal and thermo-oxidative degradation of high density polyethylene/fullerene composites , 2013 .

[18]  P. Halley,et al.  Correlation between chain microstructural changes and embrittlement of LLDPE-based films during photo- and thermo-oxidative degradation , 2013 .

[19]  Isaac Kauvar,et al.  The Role of Electron Affinity in Determining Whether Fullerenes Catalyze or Inhibit Photooxidation of Polymers for Solar Cells , 2012 .

[20]  N. Park,et al.  Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9% , 2012, Scientific Reports.

[21]  P. Blom,et al.  Degradation mechanisms in organic photovoltaic devices , 2012 .

[22]  Suren A. Gevorgyan,et al.  Stability of Polymer Solar Cells , 2012, Advanced materials.

[23]  Hans-Joachim Egelhaaf,et al.  Reversible and irreversible degradation of organic solar cell performance by oxygen , 2011 .

[24]  R. Ramani,et al.  Application of model-free kinetics to the thermal and thermo-oxidative degradation of poly(3-hexyl thiophene) , 2010 .

[25]  A. Arias,et al.  Materials and applications for large area electronics: solution-based approaches. , 2010, Chemical reviews.

[26]  Shijun Jia,et al.  Polymer–Fullerene Bulk‐Heterojunction Solar Cells , 2009, Advanced materials.

[27]  Chain‐Shu Hsu,et al.  Synthesis of conjugated polymers for organic solar cell applications. , 2009, Chemical reviews.

[28]  Agnès Rivaton,et al.  The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered , 2009 .

[29]  Gang Li,et al.  Recent Progress in Polymer Solar Cells: Manipulation of Polymer:Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells , 2009 .

[30]  P. Gijsman.  Review on the thermo-oxidative degradation of polymers during processing and in service , 2008 .

[31]  Frederik C. Krebs,et al.  Degradation and stability of polymer and organic solar cells , 2008 .

[32]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[33]  Effect of photo- and thermo-oxidative degradation on the performance of hybrid photovoltaic cells with a fluorene-based copolymer and nanocrystalline TiO2 , 2008 .

[34]  N. S. Sariciftci,et al.  Conjugated polymer-based organic solar cells. , 2007, Chemical reviews.

[35]  René A. J. Janssen,et al.  Polymer-Fullerene Bulk Heterojunction Solar Cells , 2005 .

[36]  H. Shim,et al.  Effect of keto defects on the electrical properties of fluorene-based oligomers , 2004 .

[37]  Xiaoniu Yang,et al.  Morphology and Thermal Stability of the Active Layer in Poly(p-phenylenevinylene)/Methanofullerene Plastic Photovoltaic Devices , 2004 .

[38]  Daniel Moses,et al.  Stabilized Blue Emission from Polyfluorene‐Based Light‐Emitting Diodes: Elimination of Fluorenone Defects , 2003 .

[39]  B. Ginzburg,et al.  The effect of fullerene C60 on the thermooxidative degradation of a free-radical PMMA studied by thermogravimetry and calorimetry , 2001 .

[40]  B. M. Monroe,et al.  Quenching of singlet oxygen by nickel complexes , 1979 .

[41]  V. B. Ivanov,et al.  The Quenching of Singlet Oxygen , 1976 .

[42]  J. Zannucci,et al.  Mechanism of Stabilization of Some Polypropylene Ultraviolet Stabilizers , 1974 .