Additive and Substractive Surface Structuring by Femtosecond Laser Induced Material Ejection and Redistribution

A novel additive surface structuring process is devised, which involves localized, intense femtosecond laser irradiation. The irradiation induces a phase explosion of the material being irradiated, and a subsequent ejection of the ablative species that are used as additive building blocks. The ejected species are deposited and accumulated in the vicinity of the ablation site. This redistribution of the material can be repeated and controlled by raster scanning and multiple pulse irradiation. The deposition and accumulation cause the formation of µm-scale three-dimensional structures that surpass the initial surface level. The above-mentioned ablation, deposition, and accumulation all together constitute the proposed additive surface structuring process. In addition, the geometry of the three-dimensional structures can be further modified, if desirable, by a subsequent substractive ablation process. Microstructural analysis reveals a quasi-seamless conjugation between the surface where the structures grow and the structures additively grown by this method, and hence indicates the mechanic robustness of these structures. As a proof of concept, a sub-mm sized re-entrant structure and pillars are fabricated on aluminum substrate by this method. Single units as well as arrayed structures with arbitrary pattern lattice geometry are easily implemented in this additive surface structuring scheme. Engineered surface with desired functionalities can be realized by using this means, i.e., a surface with arrayed pillars being rendered with superhydrophobicity.

[1]  Anton Rudenko,et al.  Influence of pulse repetition rate on morphology and material removal rate of ultrafast laser ablated metallic surfaces , 2019, Optics and Lasers in Engineering.

[2]  R. Stoian,et al.  Light absorption by surface nanoholes and nanobumps , 2019, Applied Surface Science.

[3]  A. Piqué,et al.  Laser Printing of Functional Materials: 3D Microfabrication, Electronics and Biomedicine , 2018 .

[4]  T. Douillard,et al.  Self-Arranged Periodic Nanovoids by Ultrafast Laser-Induced Near-Field Enhancement , 2018 .

[5]  L. Zhigilei,et al.  Melt dynamics and melt-through time in continuous wave laser heating of metal films: Contributions of the recoil vapor pressure and Marangoni effects , 2017 .

[6]  J. Siegel,et al.  Three-Dimensional Self-Organization in Nanocomposite Layered Systems by Ultrafast Laser Pulses. , 2017, ACS nano.

[7]  M. Kupper,et al.  Surface structuring by laser remelting of metals , 2017 .

[8]  Robin H. A. Ras,et al.  Oil droplet self-transportation on oleophobic surfaces , 2016, Science Advances.

[9]  Anne-Patricia Alloncle,et al.  [INVITED] Laser-induced forward transfer: A high resolution additive manufacturing technology , 2016 .

[10]  Peng Wan,et al.  Femtosecond laser additive manufacturing of iron and tungsten parts , 2015 .

[11]  S. Amoruso,et al.  Ultrashort laser ablation of bulk copper targets: Dynamics and size distribution of the generated nanoparticles , 2014 .

[12]  F. Bourquard,et al.  In situ diagnostic of the size distribution of nanoparticles generated by ultrashort pulsed laser ablation in vacuum , 2014 .

[13]  Martin Richardson,et al.  Femtosecond Laser Post-Processing of Metal Parts Produced by Laser Additive Manufacturing , 2013 .

[14]  J. Bonse,et al.  Femtosecond laser-induced removal of silicon nitride layers from doped and textured silicon wafers used in photovoltaics , 2013 .

[15]  D. Alexander,et al.  Formation of multiscale surface structures on nickel via above surface growth and below surface growth mechanisms using femtosecond laser pulses. , 2013, Optics express.

[16]  M. Harnois,et al.  From micro to nano reentrant structures: hysteresis on superomniphobic surfaces , 2013, Colloid and Polymer Science.

[17]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[18]  P. Combis,et al.  Guiding heat in laser ablation of metals on ultrafast timescales: an adaptive modeling approach on aluminum , 2012 .

[19]  Razvan Stoian,et al.  Optical emission and nanoparticle generation in Al plasmas using ultrashort laser pulses temporally optimized by real-time spectroscopic feedback , 2010 .

[20]  Zhibin Lin,et al.  Atomistic Modeling of Short Pulse Laser Ablation of Metals: Connections between Melting, Spallation, and Phase Explosion† , 2009 .

[21]  E Audouard,et al.  Dynamic ultrafast laser spatial tailoring for parallel micromachining of photonic devices in transparent materials. , 2009, Optics express.

[22]  Tatiana Itina,et al.  Investigation of nanoparticle generation during femtosecond laser ablation of metals , 2007 .

[23]  Salvatore Amoruso,et al.  Femtosecond laser pulse irradiation of solid targets as a general route to nanoparticle formation in a vacuum , 2005 .

[24]  B. Luk’yanchuk,et al.  Selected problems of laser ablation theory , 2002 .

[25]  D. Saint-Pierre,et al.  Fast Uniform Micro Structuring of DLC Surfaces Using Multiple Ultrashort Laser Spots through Spatial Beam Shaping , 2016 .

[26]  Shuang Bai,et al.  Femtosecond laser melting and resolidifying of high-temperature powder materials , 2015 .

[27]  A. Veld,et al.  Analysis of irradiation processes for laser-induced periodic surface structures , 2013 .