Application of a Resistive Superconducting Fault Current Limiter in a Distribution Grid

Abstract This article presents a study on short-circuit current limiting using resistive superconducting fault current limiters, based on a melt cast processed BSCCO-2212. The application of the resistive superconducting fault current limiter was analyzed when installed downstream of a substation, protecting a distribution feeder. The studied power system is based on a dynamic model of the IEEE 13-node test feeder considering a power system expansion scenario, including renewable power generation. As a result of the power system expansion, fault current levels tend to increase, and the resistive superconducting fault current limiter device is used for fault current mitigation. The main contribution of this article is the performance assessment of superconducting fault current limiters and its effects on power quality due to different fault locations in the system and by accounting the complexity of the power system topology. Results obtained demonstrate that the system expansion does not significantly raise fault current levels. It also demonstrated that the resistive superconducting fault current limiter has a desirable operation zone, and unwanted power interruption may occur due to its operation outside this zone.

[1]  J. C. Das,et al.  Industrial Power Systems , 1999 .

[2]  A. Polasek,et al.  Thermal–electrical analogy for simulations of superconducting fault current limiters , 2014 .

[3]  Sung-Kwan Joo,et al.  Superconducting Fault Current Limiter Placement for Power System Protection Using the Minimax Regret Criterion , 2015, IEEE Transactions on Applied Superconductivity.

[4]  Yuexin Yin,et al.  Fault-current limiter applications in medium- and high-voltage power distribution systems , 1998 .

[5]  Mathias Noe,et al.  Manufacturing and testing of MCP 2212 bifilar coils for a 10 MVA fault current limiter , 2003 .

[6]  M. S. El Moursi,et al.  Transient analysis on different types of super conducting fault current limiters , 2013, 2013 IEEE Grenoble Conference.

[7]  Dong Keun Park,et al.  Study on Optimal Location of a Resistive SFCL Applied to an Electric Power Grid , 2009, IEEE Transactions on Applied Superconductivity.

[8]  Carlos A. Canesin,et al.  Comparative analysis of MPPT techniques for PV applications , 2011, 2011 International Conference on Clean Electrical Power (ICCEP).

[9]  W. T. B. de Sousa,et al.  Simulations and Tests of MCP-BSCCO-2212 Superconducting Fault Current Limiters , 2012, IEEE Transactions on Applied Superconductivity.

[10]  F. Santamaria,et al.  Regulation on distributed generation: Latin American Case , 2014, 2014 IEEE PES Transmission & Distribution Conference and Exposition - Latin America (PES T&D-LA).

[11]  W. H. Kersting,et al.  Radial distribution test feeders , 1991, 2001 IEEE Power Engineering Society Winter Meeting. Conference Proceedings (Cat. No.01CH37194).

[12]  W. T. B. de Sousa,et al.  Recovery of Superconducting State in an R-SCFCL MCP-BSCCO-2212 Assembly , 2013, IEEE Transactions on Applied Superconductivity.

[13]  Normann Fischer,et al.  Addressing protection challenges associated with Type 3 and Type 4 wind turbine generators , 2015, 2015 68th Annual Conference for Protective Relay Engineers.

[14]  Antonio Morandi,et al.  State of the art of superconducting fault current limiters and their application to the electric power system , 2013 .

[15]  J. C. Das.  Limitations of current limiting protectors for expansion of electrical distribution systems , 1996, Proceedings of 1996 IAS Industrial and Commercial Power Systems Technical Conference.

[16]  W. Lanz,et al.  Fault current limiter based on high temperature superconductors – different concepts, test results, simulations, applications , 2001 .

[17]  M. Noe,et al.  CURL 10: development and field-test of a 10 kV/10 MVA resistive current limiter based on bulk MCP-BSCCO 2212 , 2005, IEEE Transactions on Applied Superconductivity.

[18]  Frederick D. Painter,et al.  Root-Cause Analysis of Simultaneous Faults on an Offshore FPSO Vessel , 2014, IEEE Transactions on Industry Applications.

[19]  M. M. Morcos,et al.  Voltage Sag and Recovery Time in Repetitive Events , 2002, IEEE Power Engineering Review.

[20]  Braz J. Cardoso Filho,et al.  Analysis of the operation of a D-STATCOM in unbalanced distribution systems under voltage disturbances , 2010, 2010 IEEE/PES Transmission and Distribution Conference and Exposition: Latin America (T&D-LA).

[21]  Nate Blair,et al.  Comparison of Photovoltaic Models in the System Advisor Model: Preprint , 2013 .

[22]  K. Ryu,et al.  A Numerical Study on Temperature Increase in the Resistive SFCL Element Due to the Quench Condition , 2006, IEEE Transactions on Applied Superconductivity.

[23]  Mathias Noe,et al.  Transient Simulations of an Air-Coil SFCL , 2014, IEEE Transactions on Applied Superconductivity.

[24]  Nick Papanikolaou,et al.  Optimum design of low-voltage distributed photovoltaic systems oriented to enhanced fault ride through capability , 2015 .

[25]  R. Gagnon,et al.  Large-Scale Real-Time Simulation of Wind Power Plants into Hydro-Québec Power System , 2010 .

[26]  Terence Hazel,et al.  Pyrotechnic current limiting devices — From design to operation , 2014, 2014 Petroleum and Chemical Industry Conference Europe.

[27]  K. Tekletsadik,et al.  Development of a 7.5 MVA superconducting fault current limiter , 1999, IEEE Transactions on Applied Superconductivity.