A 40-50-GHz SiGe 1 : 8 differential power divider using shielded broadside-coupled striplines

This paper presents a 1 : 8 differential power divider implemented in a commercial SiGe BiCMOS process using fully shielded broadside-coupled striplines integrated vertically in the silicon interconnect stackup. The 1 : 8 power divider is only 1.12 x1.5 mm2 including pads, and shows 0.4-dB rms gain imbalance and <3deg rms phase imbalance from 40 to 50 GHz over all eight channels, a measured power gain of 14.9 plusmn0.6 dB versus a passive divider at 45 GHz, and a 3-dB bandwidth from 37 to 52 GHz. A detailed characterization of the shielded broadside-coupled striplines is presented and agrees well with simulations. These compact lines can be used for a variety of applications in SiGe/CMOS millimeter-wave circuits, including differential signal distribution, miniature power dividers, matching networks, filters, couplers, and baluns.

[1]  T. Hirota,et al.  New MIC Power Dividers Using Coupled Microstrip-Slot Lines: Two-Sided MIC Power Dividers , 1985 .

[2]  S. B. Cohn,et al.  Thickness Corrections for Capacitive Obstacles and Strip Conductors , 1960 .

[3]  S.P. Voinigescu,et al.  30-100-GHz inductors and transformers for millimeter-wave (Bi)CMOS integrated circuits , 2005, IEEE Transactions on Microwave Theory and Techniques.

[4]  Hong-Yeh Chang,et al.  Design and analysis of CMOS broad-band compact high-linearity modulators for gigabit microwave/millimeter-wave applications , 2006, IEEE Transactions on Microwave Theory and Techniques.

[5]  F. R. Phelleps,et al.  A 0.5-watt 47-GHz power amplifier using GaAs monolithic circuits , 1992 .

[6]  H. Chiou,et al.  15-60 GHz asymmetric broadside coupled balun in 0.18 μm CMOS technology , 2007 .

[7]  Israel A. Wagner,et al.  On-chip interconnect-aware design and modeling methodology based on high bandwidth transmission line devices , 2003, Proceedings 2003. Design Automation Conference (IEEE Cat. No.03CH37451).

[8]  A. Ferrero,et al.  On-wafer calibration algorithm for partially leaky multiport vector network analyzers , 2005, IEEE Transactions on Microwave Theory and Techniques.

[9]  Joungho Kim,et al.  Accurate high frequency lossy model of differential signal line including mode-conversion and common-mode propagation effect , 2004, 2004 International Symposium on Electromagnetic Compatibility (IEEE Cat. No.04CH37559).

[10]  W. R. Eisenstadt,et al.  High-speed VLSI interconnect modeling based on S-parameter measurements , 1993 .

[11]  B. Gaucher,et al.  SiGe bipolar transceiver circuits operating at 60 GHz , 2005, IEEE Journal of Solid-State Circuits.

[12]  Gabriel M. Rebeiz,et al.  A 30-40 GHz 1:16 Internally Matched SiGe Active Power Divider for Phased Array Transmitters , 2007, 2007 IEEE Custom Integrated Circuits Conference.

[13]  W. Eisenstadt,et al.  Combined differential and common-mode scattering parameters: theory and simulation , 1995 .

[14]  H. Zirath,et al.  CMOS MMICs for microwave and millimeter wave applications , 2004, 15th International Conference on Microwaves, Radar and Wireless Communications (IEEE Cat. No.04EX824).

[15]  T. Tokumitsu,et al.  Very small ultra-wide-band MMIC magic T and applications to combiners and dividers , 1989 .

[16]  G.M. Rebeiz,et al.  A Q-band (40–45 GHz) 16-element phased-array transmitter in 0.18-μm SiGe BiCMOS technology , 2008, 2008 IEEE Radio Frequency Integrated Circuits Symposium.

[17]  S. Cohn.  Characteristic Impedances of Broadside-Coupled Strip Transmission Lines , 1960 .