Determining the Optimal Cutting Parameters for Required Productivity for the Case of Rough External Turning of AISI 1045 Steel with Minimal Energy Consumption

One of the most important challenges for every machining shopfloor, especially a small one, is to achieve the required productivity with minimal energy consumption and engaged power. The paper presents a way to determine the optimal combination of values of cutting parameters such as depth of cut, feed rate and cutting speed from the range of their recommended values, which are usually additionally limited by the real conditions of available machines and tools. The optimal combination is the one which ensures targeted productivity and maximum energy savings at the same time. As an example, a real practice case of external rough turning of an AISI 1045 steel workpiece is presented. The selection of the optimal combination of cutting parameter values is based on a model which is developed using in situ measurements of energy consumption and engaged power in an experiment that emulates the critical operation in terms of energy consumption. The results show that optimization of cutting parameter values that enables the minimum of total energy consumption while achieving target productivity, does not necessarily enable the maximum of energy savings for a given operation. In the example from real practice shown in the paper, this optimization approach can cause higher total energy consumption by as much as 15.9% compared to the combination of parameters that ensure maximum productivity.