An Experimental Investigation of the Flow Fields Within Geometrically Similar Miniature-Scale Centrifugal Pumps

Flow fields within two miniature-scale centrifugal pumps are measured and analyzed to facilitate an understanding of how scaling influences performance. A full-scale pump, of impeller diameter 34.3 mm and blade height 5 mm, and a half-scale version were fabricated from a transparent material to allow optical access. Synchronized particle-image velocimetry (PIV) was performed within the blade passage of each pump. Pressure-flow characteristics, hydrodynamic efficiencies, and high-resolution flow field measurements are repbrted for six rotational speeds over a Reynolds number range 706―2355. Fluidic phenomena occurring in the impeller passage at both pressure and suction surfaces are identified. Efficiencies are evaluated from direct measurement to be between 10% and 44% and compared with inner efficiencies calculated from the PIV data. Hydrodynamic losses as a percentage of overall efficiency increase from 12% to 55% for 2355 ≤ Re ≤ 706. Slip factors, in the range 0.92―1.10, have been derived from velocimetry data.

[1]  Alexey J. Stepanoff,et al.  Centrifugal and Axial Flow Pumps: Theory, Design, and Application , 1991 .

[2]  Hisateru Takano,et al.  Visualization study of the transient flow in the centrifugal blood pump impeller. , 2001 .

[3]  James C. McDaniel,et al.  Effect of Reynolds Number on Performance of a Small Centrifugal Pump , 2003 .

[4]  John M. Sankovic,et al.  PIV Investigations of the Flow Field in the Volute of a Rotary Blood Pump , 2004 .

[5]  Markus Lorenz,et al.  Rotodynamic Pump Scaling , 2002, ASAIO journal.

[6]  Suresh V. Garimella,et al.  Thermal challenges in next generation electronic systems - summary of panel presentations and discussions , 2002 .

[7]  Arvind Raman,et al.  Microscale pumping technologies for microchannel cooling systems , 2004 .

[8]  Joseph Katz,et al.  Quantitative Visualization of the Flow Within the Volute of a Centrifugal Pump. Part B: Results and Analysis , 1992 .

[9]  Lisa Vaccari,et al.  Compact micropumping system based on LIGA fabricated microparts , 2006 .

[10]  Kin Fong Lei,et al.  A vortex pump-based optically-transparent microfluidic platform for biotech and medical applications , 2007, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[11]  P. Rodgers,et al.  Extending the limits of air-cooling in microelectronic equipment , 2005, EuroSimE 2005. Proceedings of the 6th International Conference on Thermal, Mechanial and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2005..

[12]  Christian Brix Jacobsen,et al.  Flow in a Centrifugal Pump Impeller at Design and Off-Design Conditions—Part I: Particle Image Velocimetry (PIV) and Laser Doppler Velocimetry (LDV) Measurements , 2003 .

[13]  R. A. Van den Braembussche,et al.  Experimental investigation of the flow in the vaneless diffuser of a centrifugal pump by particle image displacement velocimetry , 1989 .

[14]  Mark G. Allen,et al.  Fluid micropumps based on rotary magnetic actuators , 1995, Proceedings IEEE Micro Electro Mechanical Systems. 1995.

[15]  Young-Do Choi,et al.  PIV measurement of internal flow characteristics of very low specific speed semi-open impeller , 2004 .

[16]  Jørgen Fredsøe,et al.  The horseshoe vortex and vortex shedding around a vertical wall-mounted cylinder exposed to waves , 1997, Journal of Fluid Mechanics.