STATE-OF-THE-ART SURVEY OF ADVANCED MATERIALS AND THEIR POTENTIAL APPLICATION IN HIGHWAY INFRASTRUCTURE

This study attempted to identify new materials that might have applications in highway infrastructure that could lead to savings for the Virginia Department of Transportation (VDOT) and other transportation agencies. This search identified 47 materials in various stages of development, of which several offer reasonable potential applications in transportation. Ratings by VDOT's Materials Division and Structure & Bridge Division identified 7 materials with an average rating greater than 2.5 (on a scale of 1 through 5) in terms of their potential for VDOT: biosensor for lead, elastomeric coating for blast protection, SAFER (Steel and Foam Energy Reduction) barrier, urethane coating for cathodic protection, smart fibers, smart paints, and smart polymeric coatings. Ratings by the two divisions identified 7 other materials with either an average rating of 2.5 or a rating of 4 or more by either division: electrically conductive concrete, microencapsulated fire-extinguishing agent, piezoelectric paint, self-healing coating, self-healing concrete, chemiluminescent lightsticks, and soil-decontaminating nanoparticles. An additional material with potential, mussels' glue, was identified after the aforementioned ratings were obtained.

[1]  P. Phulé,et al.  Magnetorheological (MR) fluids: Principles and applications , 2001 .

[2]  D. Chung,et al.  RADIO-WAVE-REFLECTING CONCRETE FOR LATERAL GUIDANCE IN AUTOMATIC HIGHWAYS , 1998 .

[3]  S. White,et al.  Self-activated healing of delamination damage in woven composites , 2001 .

[4]  Victor C. Li New Construction Materials Proliferate in Japan , 1995 .

[5]  D.D.L. Chung,et al.  Uniaxial compression in carbon fiber-reinforced cement, sensed by electrical resistivity measurement in longitudinal and transverse directions , 2000 .

[6]  Graham Schleyer,et al.  Electrorheological and magnetorheological fluids in blast resistant design applications , 2002 .

[7]  G. Clemeña Electrically conductive portland cement concrete , 1986 .

[8]  Michael L. Shuler,et al.  Use of amphiphilic polymer particles for in situ extraction of sorbed phenanthrene from a contaminated aquifer material. , 2000 .

[9]  S. Boocock,et al.  EFFECT OF SURFACE CONTAMINANTS ON COATING LIFE. FINAL REPORT , 1991 .

[10]  Yl L. Xu,et al.  Seismic response control of large-span machinery building on top of ship lift towers using ER/MR moment controllers , 2002 .

[11]  Jan Van Humbeeck,et al.  Non-medical applications of shape memory alloys , 1999 .

[12]  L. Schetky Shape-memory alloys , 1979 .

[13]  Margarit G Lozev Acoustic emission monitoring of steel bridge members , 1997 .

[14]  W. Smith,et al.  Principles of Materials Science and Engineering , 1986 .

[15]  Yun Mook Lim,et al.  Feasibility study of a passive smart self-healing cementitious composite , 1998 .

[16]  Robert G. Kelly,et al.  DEVELOPMENT OF A PROTOTYPE VERSION OF AN EMBEDDABLE CORROSIVITY MEASURING INSTRUMENT FOR REINFORCED CONCRETE , 2002 .

[17]  Michael J. Chajes,et al.  APPLICATION OF FIBER REINFORCED POLYMER COMPOSITES TO THE HIGHWAY INFRASTRUCTURE , 2003 .

[18]  Carolyn M. Dry,et al.  Procedures developed for self-repair of polymer matrix composite materials , 1996 .

[19]  Yash Paul Virmani,et al.  Comparing the Chloride Resistances of Reinforcing Bars , 2004 .

[20]  Hegeon Kwun,et al.  Feasibility of under-lagging corrosion detection in steel pipe using the magnetostrictive sensor technique , 1995 .

[21]  William D. Callister,et al.  Materials Science and Engineering: An Introduction , 1985 .

[22]  A. Pelton,et al.  An overview of nitinol medical applications , 1999 .

[23]  Claude Cohen,et al.  Engineered polymeric nanoparticles for soil remediation. , 2004, Environmental science & technology.

[24]  N. Sottos,et al.  Autonomic healing of polymer composites , 2001, Nature.

[25]  Carolyn M. Dry,et al.  A time-release technique for corrosion prevention , 1998 .

[26]  D.D.L. Chung,et al.  Damage monitoring of cement paste by electrical resistance measurement , 2000 .