Design and processing of a ceramic laminate with high toughness and strong interfaces

[1]  S. E. Brünings,et al.  Steel‐Reinforced Plasma Ceramics ‐ A New Multilayer Design , 2008 .

[2]  C. Baudín,et al.  Mechanical behaviour of structural ceramics , 2007 .

[3]  A. Evans,et al.  Crack‐Growth Resistance of Microcracking Brittle Materials , 2006 .

[4]  F. Lange,et al.  Compressive Surface Layer to Avoid Edge Cracking in Laminar Ceramic Composite , 2005 .

[5]  C. Baudín,et al.  Design and processing of Al2O3–Al2TiO5 layered structures , 2005 .

[6]  D. Kuo,et al.  A Strong and Damage‐Tolerant Oxide Laminate , 2005 .

[7]  Janet B. Davis,et al.  Fabrication and Crack Deflection in Ceramic Laminates with Porous Interlayers , 2004 .

[8]  A. Evans,et al.  Criterion for the Avoidance of Edge Cracking in Layered Systems , 2004 .

[9]  C. Baudín,et al.  Reaction sintered Al2O3/Al2TiO5 microcrack-free composites obtained by colloidal filtration , 2004 .

[10]  G. Tan,et al.  Effect of porous interlayers on crack deflection in ceramic laminates , 2004 .

[11]  Yong Huang,et al.  The measurement and characterization of the interfacial toughness of Si3N4/BN composites by a three-point bending test , 2003 .

[12]  R. P. Uribe,et al.  Formación de titanato de aluminio por reacción en estado sólido de alumina y titania , 2000 .

[13]  Rao,et al.  Laminar Ceramics That Exhibit a Threshold Strength. , 1999, Science.

[14]  W. Clegg.  Design of ceramic laminates for structural applications , 1998 .

[15]  H. M. Chan.  LAYERED CERAMICS: Processing and Mechanical Behavior , 1997 .

[16]  L. Zhang,et al.  High toughness silicon carbide/graphite laminar composite by slip casting , 1995 .

[17]  O. Prakash,et al.  Crack deflection in ceramic/ceramic laminates with strong interfaces , 1995 .

[18]  W. Clegg,et al.  The fabrication and failure of laminar ceramic composites , 1992 .

[19]  K. Kendall,et al.  A simple way to make tough ceramics , 1990, Nature.

[20]  L. M. Braun,et al.  Technique for the R‐Curve Determination of Y‐TZP Using Indentation‐Produced Flaws , 1990 .

[21]  R. Raj,et al.  Estimate of the activation energies for boundary diffusion from rate-controlled sintering of pure alumina, and alumina doped with zirconia or titania , 1990 .

[22]  K. Eguchi,et al.  Some Roles of MgO and TiO2 in Densification of a Sinterable Alumina , 1987 .

[23]  M. Inagaki,et al.  Energy Principle of Elastic-Plastic Fracture and Its Application to the Fracture Mechanics of a Polycrystalline Graphite , 1983 .

[24]  J. Blendell,et al.  Measurement of Stress Due to Thermal Expansion Anisotropy in Al2O3 , 1982 .

[25]  W. Pompe,et al.  Increased fracture toughness of ceramics by energy-dissipative mechanisms , 1981 .

[26]  V. Fréchette,et al.  Stress Distribution in Multiphase Systems: I, Composites with Planar Interfaces , 1967 .

[27]  C. Baudín,et al.  Fracture behaviour of microcrack-free alumina–aluminium titanate ceramics with second phase nanoparticles at alumina grain boundaries , 2008 .

[28]  C. Baudín,et al.  Piezo-spectroscopic characterization of alumina-aluminium titanate laminates , 2006 .

[29]  Shuyi Qin,et al.  Fracture behavior of laminated SiC composites , 2004 .

[30]  Yong Huang,et al.  Effect of geometrical factors on the mechanical properties of Si3N4/BN multilayer ceramics , 2004 .

[31]  F. Gnanam,et al.  Influence of MnO and TiO2 additives on density, microstructure and mechanical properties of Al2O3 , 2002 .

[32]  C. Jian,et al.  Mechanical properties and microstructure of a Si3N4/Ti3SiC2 multilayer composite , 2002 .

[33]  Naohiro Soga,et al.  Ceramics toward the 21st Century , 1999 .

[34]  M. Elices,et al.  Stress Intensity factor, compliance and CMOD for a General Three-Point-Bend Beam , 1998 .

[35]  D. Kuo,et al.  Fracture of multilayer oxide composites , 1998 .

[36]  Ilhan A. Aksay,et al.  Hierarchically structured materials , 1992 .

[37]  J. Im,et al.  Polymer Microlayer Composites , 1991 .

[38]  I. Aksay,et al.  Structure-Mechanical Property Relationships In A Biological Ceramic-Polymer Composite: Nacre , 1991 .

[39]  R. Bradt,et al.  Graphical Methods for Determining the Nonlinear Fracture Parameters of Silica and Graphite Refractory Composites , 1986 .

[40]  A. Evans,et al.  Fracture Mechanics of Ceramics , 1986 .

[41]  A. S. Jayatilaka,et al.  Fracture of engineering brittle materials , 1979 .

[42]  H. Tattersall,et al.  The work of fracture and its measurement in metals, ceramics and other materials , 1966 .