Robustness and reliability investigations on a nonlinear energy sink device concept

In this work, the reliability and robustness of a nonlinear energy sink device concept are investigated. The system is studied and optimized in deterministic and probabilistic cases. It is also studied under various types of uncertainty modelings with different reliability based robust design optimization formulations. The obtained results reveal the sensitivity of the device to the input uncertainties. The optimal designs obtained with the formulation under uncertainties are very different from the deterministic optimal design. New system configurations are obtained which ensure robust, highly reliable designs. In addition, a comparison is made between the different formulations and a conclusion is drawn about the suitable formulations for such a problem.

[2]  Alexander F. Vakakis,et al.  Experimental Testing and Numerical Simulation of a Six-Story Structure Incorporating Two-Degree-of-Freedom Nonlinear Energy Sink , 2014 .

[3]  Simon Moritz Göhler,et al.  Robustness Metrics: Consolidating the multiple approaches to quantify Robustness , 2016 .

[4]  Samy Missoum,et al.  Stochastic Optimization of Nonlinear Energy Sinks for the Mitigation of Limit Cycle Oscillations , 2019, AIAA Journal.

[5]  Timothy M. Whalen,et al.  Design and Application of a Nonlinear Energy Sink to Mitigate Vibrations of an Air Spring Supported Slab , 2005 .

[6]  J. Havinga,et al.  Sequential improvement for robust optimization using an uncertainty measure for radial basis functions , 2017 .

[7]  C. Lamarque,et al.  A multi-parametric recursive continuation method for nonlinear dynamical systems , 2019, Mechanical Systems and Signal Processing.

[8]  Samy Missoum,et al.  Optimization Under Uncertainty of Parallel Nonlinear Energy Sinks , 2016 .

[9]  Gang Chen,et al.  The Robust Optimization Design for Cylindrical Helical Compression Spring , 2012 .

[10]  Chinedum E. Okwudire Reduction of Torque-Induced Bending Vibrations in Ball Screw-Driven Machines via Optimal Design of the Nut , 2012 .

[11]  Katharina Kremer,et al.  Optimization Approaches for the Numerical Design of Structures Under Consideration of Polymorphic Uncertain Data , 2019 .

[12]  M. Shokrieh,et al.  Analysis and optimization of a composite leaf spring , 2003 .

[13]  Pascal Lafon,et al.  On the formulation of optimization problems under uncertainty in mechanical design , 2018, International Journal on Interactive Design and Manufacturing (IJIDeM).

[14]  Davood Younesian,et al.  Application of the Nonlinear Energy Sink Systems in Vibration Suppression of Railway Bridges , 2010 .

[15]  Georges Kouroussis,et al.  Structural impact response for assessing railway vibration induced on buildings , 2017 .

[16]  Gaëtan Kerschen,et al.  Flutter Control of a Two-Degrees-of-Freedom Airfoil Using a Nonlinear Tuned Vibration Absorber , 2017 .

[17]  M. Leblouba,et al.  Stiffness and energy dissipation of Oval Leaf Spring mounts under unidirectional line loading , 2017 .

[18]  Giampiero Mastinu,et al.  On the Optimal Design of Composite Material Tubular Helical Springs , 2001 .

[19]  Stephane Pernot,et al.  Design criteria for optimally tuned nonlinear energy sinks—part 1: transient regime , 2012 .

[20]  Karen Willcox,et al.  Variance-Based Sensitivity Analysis to Support Simulation-Based Design Under Uncertainty , 2016 .

[21]  Om Prakash Yadav,et al.  Reliability‐Based Design Optimization Considering Probabilistic Degradation Behavior , 2012, Qual. Reliab. Eng. Int..

[22]  G. Kerschen,et al.  Suppression Aeroelastic Instability Using Broadband Passive Targeted Energy Transfers, Part 1: Theory , 2007 .

[23]  Jeffrey H. Lang,et al.  A Device for Harvesting Energy From Rotational Vibrations , 2010 .

[24]  C. Lamarque,et al.  Dynamics and energy exchanges between a linear oscillator and a nonlinear absorber with local and global potentials , 2016 .

[25]  F. Weber,et al.  Semi-active vibration absorber based on real-time controlled MR damper , 2014 .

[26]  R. Caflisch Monte Carlo and quasi-Monte Carlo methods , 1998, Acta Numerica.

[27]  Nicolas Gayton,et al.  On the consideration of uncertainty in design: optimization - reliability - robustness , 2016 .

[28]  Shorya Awtar,et al.  Modeling Geometric Nonlinearities in the Free Vibration of a Planar Beam Flexure With a Tip Mass , 2014 .

[29]  C. Lamarque,et al.  Control of vertical oscillations of a cable by a piecewise linear absorber , 2018, Journal of Sound and Vibration.

[30]  Jamel Louati,et al.  Interval computation and constraint propagation for the optimal design of a compression spring for a linear vehicle suspension system , 2015 .

[31]  Oleg Gendelman,et al.  Energy Pumping in Nonlinear Mechanical Oscillators: Part II—Resonance Capture , 2001 .

[32]  Zhihua Wang,et al.  Time-Dependent Reliability-Based Robust Design Optimization Using Evolutionary Algorithm , 2019, ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg.

[33]  Tianzhi Yang,et al.  Nonlinear Energy Sink for Whole-Spacecraft Vibration Reduction , 2017 .

[34]  Vincent Baudoui Optimisation robuste multiobjectifs par modèles de substitution , 2012 .

[35]  Emmanuel Rodriguez,et al.  Optimal design of conical springs , 2008, Engineering with Computers.

[36]  Pascal Lafon,et al.  Study of Uncertainties and Objective Function Modeling Effects on Probabilistic Optimization Results , 2019, ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg.

[37]  Pierre-Olivier Mattei,et al.  Optimization Under Uncertainty of Parallel Nonlinear Energy Sinks , 2016 .

[38]  Samy Missoum,et al.  Stochastic optimization of nonlinear energy sinks , 2017 .

[39]  Wei-Ning Yang,et al.  Using Common Random Numbers and Control Variates in Multiple-Comparison Procedures , 1991, Oper. Res..

[40]  Manuel Paredes,et al.  Analytical Behavior Law for a Constant Pitch Conical Compression Spring , 2006 .

[41]  Zheng Lu,et al.  Optimization design and experimental verification of track nonlinear energy sink for vibration control under seismic excitation , 2017 .

[42]  Manuel Paredes,et al.  Tuned Nonlinear Energy Sink With Conical Spring: Design Theory and Sensitivity Analysis , 2018 .