Limit analysis of composite materials with anisotropic microstructures: A homogenization approach

Abstract A nonlinear mathematical programming approach together with the finite element method and homogenization technique is developed to implement kinematic limit analysis for a microstructure and the macroscopic strength of a composite with anisotropic constituents can be directly calculated. By means of the homogenization theory, the classical kinematic theorem of limit analysis is generalized to incorporate the microstructure – Representative Volume Element (RVE) chosen from a periodic composite/heterogeneous material. Then, using an associated plastic flow rule, a general yield function is directly introduced into limit analysis and a purely-kinematic formulation is obtained. Based on the mathematical programming technique, the finite element model of microstructure is finally formulated as a nonlinear programming problem subject to only one equality constraint, which is solved by a direct iterative algorithm. The calculation is entirely based on a purely-kinematical velocity field without calculation of stress fields. Meanwhile, only one equality constraint is introduced into the nonlinear programming problem. So the computational cost is very modest. Both anisotropy and pressure-dependence of material yielding behavior are considered in the general form of kinematic limit analysis. The developed method provides a direct approach for determining the macroscopic strength domain of anisotropic composites and can serve as a powerful tool for microstructure design of composites.

[1]  Rodney Hill,et al.  LXXXVIII. On the state of stress in a plastic-rigid body at the yield point , 1951 .

[2]  E. Loute,et al.  Limit analysis and convex programming: A decomposition approach of the kinematic mixed method , 2009 .

[3]  K. Sab,et al.  Limit analysis of multi-layered plates. Part II: Shear effects , 2008 .

[4]  S Turgeman,et al.  Limit analysis: A linear formulation of the kinematic approach for axisymmetric mechanic problems , 1982 .

[5]  Dieter Weichert,et al.  Application of shakedown analysis to the plastic design of composites , 1999 .

[6]  E. Loute,et al.  Mixed method and convex optimization for limit analysis of homogeneous Gurson materials: a kinematical approach , 2009 .

[7]  Stephen J. Wright,et al.  Numerical Optimization , 2018, Fundamental Statistical Inference.

[8]  Giulio Maier,et al.  Combined elastoplastic and limit analysis via restricted basis linear programming , 1979 .

[9]  David Mautner Himmelblau,et al.  Applied Nonlinear Programming , 1972 .

[10]  Lelio Luzzi,et al.  Finite element limit analysis of anisotropic structures , 2006 .

[11]  J. Pastor,et al.  Lower and upper numerical bounds to the off-axis strength of unidirectional fiber-reinforced composites by limit analysis methods , 1997 .

[12]  Etienne Loute,et al.  Convex optimization and limit analysis: Application to Gurson and porous Drucker-Prager materials , 2008 .

[13]  H. S. Yu,et al.  Limit analysis of 2-D and 3-D structures based on an ellipsoid yield criterion , 2006 .

[14]  P. de Buhan,et al.  A homogenization approach to the yield strength of composite materials , 1991 .

[15]  Pascal Francescato,et al.  Interior point optimization and limit analysis: an application , 2003 .

[16]  Gao Yang,et al.  On the complementary bounding theorems for limit analysis , 1988 .

[17]  H. J. Greenberg,et al.  EXTENDED LIMIT DESIGN THEOREMS FOR CONTINUOUS MEDIA , 1952 .

[18]  Plastic Limit Analysis of Periodic Heterogeneous Materials by a Static Approach , 2004 .

[19]  Paolo Fuschi,et al.  Limit analysis for a general class of yield conditions , 2000 .

[20]  Mokhtar S. Bazaraa,et al.  Nonlinear Programming: Theory and Algorithms , 1993 .

[21]  Rodney Hill,et al.  A VARIATIONAL PRINCIPLE OF MAXIMUM PLASTIC WORK IN CLASSICAL PLASTICITY , 1948 .

[22]  Yinghua Liu,et al.  Plastic limit analysis of ductile composite structures from micro- to macro-mechanical analysis , 2009 .

[23]  Hwang Kehchih,et al.  A mathematical programming algorithm for limit analysis , 1991 .

[24]  C. Martin,et al.  Lower bound limit analysis of cohesive‐frictional materials using second‐order cone programming , 2006 .

[25]  Zhangzhi Cen,et al.  Numerical analysis of limit load and reference stress of defective pipelines under multi-loading systems , 1998 .

[26]  Efficient upper-bound limit analysis , 1988 .

[27]  Dieter Weichert,et al.  SHAKEDOWN ANALYSIS OF COMPOSITES , 1999 .

[28]  H. Li,et al.  Limit analysis of composite materials based on an ellipsoid yield criterion , 2006 .

[29]  Pasquale Vena,et al.  Limit analysis of orthotropic plates ? ? Partial results were presented at the Plasticity '00 Sympos , 2003 .

[30]  Hai-Sui Yu,et al.  Kinematic limit analysis of frictional materials using nonlinear programming , 2005 .

[31]  D. Koopman,et al.  On linear programming and plastic limit analysis , 1965 .

[32]  Joseph Pastor,et al.  Limit analysis and Gurson's model , 2005 .

[33]  D. C. Drucker.  Limit analysis of two and three dimensional soil mechanics problems , 1953 .

[34]  Computational limit analysis of anisotropic axisymmetric shells , 1994 .

[35]  Xi-Qiao Feng,et al.  Limit analysis of ductile composites based on homogenization theory , 2003, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[36]  Alberto Taliercio,et al.  Uniaxial strength of polymeric-matrix fibrous composites predicted through a homogenization approach , 1995 .

[37]  Chris Martin,et al.  Upper bound limit analysis using simplex strain elements and second‐order cone programming , 2007 .

[38]  Antonio Capsoni.  Limit analysis of anisotropic structures based on the kinematic theorem , 2001 .

[39]  Antonio Capsoni,et al.  Limit analysis of orthotropic structures based on Hill’s yield condition , 2001 .

[40]  Ming-Wan Lu,et al.  An algorithm for plastic limit analysis , 1995 .

[41]  Alberto Taliercio,et al.  Lower and upper bounds to the macroscopic strength domain of a fiber-reinforced composite material , 1992 .

[42]  E. Christiansen.  Computation of limit loads , 1981 .

[43]  Yuzhe Liu,et al.  A numerical method for plastic limit analysis of 3-D structures , 1995 .

[44]  Antonio Capsoni,et al.  A FINITE ELEMENT FORMULATION OF THE RIGID–PLASTIC LIMIT ANALYSIS PROBLEM , 1997 .

[45]  José Herskovits,et al.  An iterative algorithm for limit analysis with nonlinear yield functions , 1993 .

[46]  Karam Sab,et al.  Limit analysis of multi-layered plates. Part I: The homogenized Love–Kirchhoff model , 2008 .

[47]  Alan R.S. Ponter,et al.  Limit state solutions, based upon linear elastic solutions with a spatially varying elastic modulus , 1997 .