Lifetime prediction and design aspects of reliable lead-free non-collapsible BGA joints in LTCC packages for RF/microwave telecommunication applications

Purpose – The purpose of this paper is to describe the behavior of different lead-free solders (95.5Sn3.8Ag0.7Cu, i.e. SAC387 and Sn7In4.1Ag0.5Cu, i.e. SAC-In) in thermomechanically loaded non-collapsible ball grid array (BGA) joints of a low-temperature co-fired ceramic (LTCC) module. The validity of a modified Engelmaier’s model was tested to verify its capability to predict the characteristic lifetime of an LTCC module assembly implementable in field applications. Design/methodology/approach – Five printed wiring board (PWB) assemblies, each carrying eight LTCC modules, were fabricated and exposed to a temperature cycling test over a −40 to 125°C temperature range to determine the characteristic lifetimes of interconnections in the LTCC module/PWB assemblies. The failure mechanisms of the test assemblies were verified using scanning acoustic microscopy, scanning electron microscopy (SEM) and field emission SEM investigation. A stress-dependent Engelmaier’s model, adjusted for plastic-core solder ball (...

[1]  K. Rönkä,et al.  Interfacial reactions between Sn‐based solders and AgPt thick film metallizations on LTCC , 2007 .

[2]  S. Movva,et al.  High reliability second level interconnects using polymer core BGAs , 2004, 2004 Proceedings. 54th Electronic Components and Technology Conference (IEEE Cat. No.04CH37546).

[4]  T. Mattila,et al.  Impact of printed wiring board coatings on the reliability of lead-free chip-scale package interconnections , 2004 .

[5]  Jussi Putaala,et al.  Reliability and RF performance of BGA solder joints with plastic-core solder balls in LTCC/PWB assemblies , 2006, Microelectron. Reliab..

[7]  Tero Kangasvieri,et al.  Surface-mountable LTCC-SiP module approach for reliable RF and millimetre-wave packaging , 2008 .

[8]  D. Bhate,et al.  A nonlinear fracture mechanics prespective on solder joint failure: going beyond the coffin-manson equation , 2006, Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, 2006. ITHERM 2006..

[9]  J. Papapolymerou,et al.  Highly integrated millimeter-wave passive components using 3-D LTCC system-on-package (SOP) technology , 2005, IEEE Transactions on Microwave Theory and Techniques.

[10]  Janne J. Sundelin,et al.  Recrystallization behaviour of SnAgCu solder joints , 2008 .

[11]  O. Nousiainen,et al.  Thermal fatigue endurance of collapsible 95.5Sn4Ag0.5Cu spheres in LTCC/PWB assemblies , 2008, Microelectron. Reliab..

[12]  X. Chen,et al.  Effect of substrate flexibility on solder joint reliability. Part II: finite element modeling , 2005, Microelectron. Reliab..

[13]  Sung K. Kang,et al.  The microstructure of Sn in near-eutectic Sn–Ag–Cu alloy solder joints and its role in thermomechanical fatigue , 2004 .

[14]  J. E. Semmens,et al.  Characterization of flip chip interconnect failure modes using high frequency acoustic micro imaging with correlative analysis , 1997, 1997 IEEE International Reliability Physics Symposium Proceedings. 35th Annual.

[15]  M. Tanaka,et al.  Improvement of Thermal Fatigue Properties of Sn-Ag-Cu Lead-Free Solder Interconnects on Casio’s Wafer-Level Packages Based on Morphology and Grain Boundary Character , 2009 .

[16]  O. Nousiainen,et al.  Thermomechanically loaded lead-free LGA joints in LTCC/PWB assemblies , 2010 .

[17]  Kohei Tatsumi,et al.  Thermal fatigue properties and grain boundary character distribution in Sn–x Ag–0˙5Cu (x = 1, 1˙2 and 3) lead free solder interconnects , 2008 .

[18]  Chul Soon Park,et al.  A very compact 62‐GHz transmitter LTCC SiP module for wireless terminals applications , 2007 .

[19]  Jussi Putaala,et al.  Metallurgical reactions in composite 90Pb10Sn/lead-free solder joints and their effect on reliability of LTCC/PWB assembly , 2006 .

[20]  Chia-Yu Fu,et al.  BGA reliability of multilayer ceramic integrated circuit (MCIC) devices , 2000 .

[21]  Jaakko Lenkkeri,et al.  Thermal fatigue in solder joints of Ag-Pd and Ag-Pt metallized LTCC modules , 2001, Microelectron. Reliab..

[23]  H. Jantunen,et al.  Detection of Thermal Cycling-Induced Failures in RF/Microwave BGA Assemblies , 2008, IEEE Transactions on Electronics Packaging Manufacturing.

[24]  J. Vähäkangas,et al.  Thermal Fatigue Endurance of Lead-Free Composite Solder Joints over a Temperature Range of −55°C to 150°C , 2009 .

[25]  文男 内木場,et al.  Multilayered Low Temperature Cofired Ceramics (LTCC) Technology, 著者 Yoshihiko Imanaka, 出版社 Springer Science+Business Media Inc./USA, 発行年 2005年, ISBN 0-387-23130-7, $129.00 , 2005 .

[27]  Klas Andersson,et al.  Modified Engelmaier's model taking account of different stress levels , 2008, Microelectron. Reliab..

[28]  J. Heyen,et al.  Novel LTCC-/BGA-modules for highly integrated millimeter-wave transceivers , 2003, IEEE MTT-S International Microwave Symposium Digest, 2003.

[29]  A. Syed.  Accumulated creep strain and energy density based thermal fatigue life prediction models for SnAgCu solder joints , 2004, 2004 Proceedings. 54th Electronic Components and Technology Conference (IEEE Cat. No.04CH37546).

[30]  Shirish L. Patil,et al.  High reliability LTCC BGA for telecom applications , 2000, Twenty Sixth IEEE/CPMT International Electronics Manufacturing Technology Symposium (Cat. No.00CH37146).

[32]  Kenneth E. Souders,et al.  LTCC ceramic components on printed wiring boards: The issues and potential solutions , 2000 .

[33]  M. Pecht,et al.  Early Detection of Interconnect Degradation by Continuous Monitoring of RF Impedance , 2009, IEEE Transactions on Device and Materials Reliability.

[34]  W. Engelmaier.  The use environments of electronic assemblies and their impact on surface mount solder attachment reliability , 1990 .

[35]  K. Kautio,et al.  Solder joint reliability in AgPt‐metallized LTCC modules , 2005 .

[36]  Caroline Sunyong Lee,et al.  Novel joining of dissimilar ceramics in the Si3N4–Al2O3 system using polytypoid functional gradients , 2001 .

[37]  Peng Wang,et al.  Chemical, structural, and mechanical properties of the LTCC tapes , 2000 .

[38]  H. Jantunen,et al.  Influence of Thermal-Cycling-Induced Failures on the RF Performance of Ceramic Antenna Assemblies , 2011, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[39]  O. Nousiainen,et al.  Development of a reliable LTCC-BGA module platform for RF/microwave telecommunication applications , 2007 .

[40]  M. Lahti,et al.  Broadband BGA-Via Transitions for Reliable RF/Microwave LTCC-SiP Module Packaging , 2008, IEEE Microwave and Wireless Components Letters.

[41]  Masako Nozaki,et al.  Recrystallization of Sn Grains due to Thermal Strain in Sn-1.2Ag-0.5Cu-0.05Ni Solder , 2004 .