Multilayered hydrocarbon ionomer/PTFE composite electrolytes with enhanced performance for energy conversion devices

[1]  S. Yoon,et al.  Constrained hydrocarbon-based ionomers in porous Poly(tetrafluoroethylene) supports for enhanced durability of polymer electrolyte membrane fuel cells and water electrolyzers , 2022, Journal of Power Sources.

[2]  R. Wycisk,et al.  Poly(phenylene sulfonic acid)-expanded polytetrafluoroethylene composite membrane for low relative humidity operation in hydrogen fuel cells , 2022, Journal of Power Sources.

[3]  Hee-Young Park,et al.  Effect of low voltage limit on degradation mechanism during high‐frequency dynamic load in proton exchange membrane water electrolysis , 2022, International Journal of Energy Research.

[4]  Dukjoon Kim,et al.  Surface hydrophilization toward the proton conductive porous PTFE substrate impregnating SPEEK for polymer electrolyte membranes , 2022, Progress in Organic Coatings.

[5]  Jinok Yuk,et al.  Perfluorocyclobutyl-containing multiblock copolymers to induce enhanced hydrophilic/hydrophobic phase separation and high proton conductivity at low humidity , 2022, Journal of Membrane Science.

[6]  Tae Ho Kim,et al.  Ion exchange capacity controlled biphenol-based sulfonated poly(arylene ether sulfone) for polymer electrolyte membrane water electrolyzers: Comparison of random and multi-block copolymers , 2021 .

[7]  Dukjoon Kim,et al.  Porous PTFE reinforced SPEEK proton exchange membranes for enhanced mechanical, dimensional, and electrochemical stability , 2021 .

[8]  S. Yoon,et al.  Alcohol-Treated Porous PTFE Substrate for the Penetration of PTFE-Incompatible Hydrocarbon-Based Ionomer Solutions. , 2021, Langmuir : the ACS journal of surfaces and colloids.

[9]  Ki‐Hyun Kim,et al.  Accurate evaluation of hydrogen crossover in water electrolysis systems for wetted membranes , 2021 .

[10]  Y. Sung,et al.  High-performance proton-exchange membrane water electrolysis using a sulfonated poly(arylene ether sulfone) membrane and ionomer , 2020 .

[11]  S. Mehdipour‐Ataei,et al.  Durable sulfonated partially fluorinated polysulfones as membrane for PEM fuel cell , 2020 .

[12]  V. Compañ,et al.  Recent Progress in the Development of Composite Membranes Based on Polybenzimidazole for High Temperature Proton Exchange Membrane (PEM) Fuel Cell Applications , 2020, Polymers.

[13]  Harilal,et al.  Cross-Linked Polybenzimidazole Membrane for PEM Fuel Cells , 2020 .

[14]  R. He,et al.  Hyperbranched polyamidoamine modified high temperature proton exchange membranes based on PTFE reinforced blended polymers , 2020 .

[15]  Ling-bo Qu,et al.  Lamellar composite membrane with acid-base pair anchored layer-by-layer structure towards highly enhanced conductivity and stability , 2020 .

[16]  M. Alkasrawi,et al.  Novel composite membrane based on zirconium phosphate-ionic liquids for high temperature PEM fuel cells , 2020 .

[17]  M. Javanbakht,et al.  Fabrication and performance evaluation of new nanocomposite membranes based on sulfonated poly(phthalazinone ether ketone) for PEM fuel cells , 2020, RSC advances.

[18]  M. Javanbakht,et al.  Synthesis and optimization of nanocomposite membranes based on SPEEK and perovskite nanoparticles for polymer electrolyte membrane fuel cells , 2019, New Journal of Chemistry.

[19]  E. Ticianelli,et al.  The influence of ionic liquids cation on the properties of sulfonated poly (ether ether ketone)/polybenzimidazole blends applied in PEMFC , 2019, Polymer.

[20]  V. Baglio,et al.  Toward optimization of a robust low‐cost sulfonated‐polyethersulfone containing layered double hydroxide for PEM fuel cells , 2019, Journal of Applied Polymer Science.

[21]  M. Guiver,et al.  Proton-Conducting Poly-γ-glutamic Acid Nanofiber Embedded Sulfonated Poly(ether sulfone) for Proton Exchange Membranes. , 2019, ACS applied materials & interfaces.

[22]  Hee‐Tak Kim,et al.  External reinforcement of hydrocarbon membranes by a three-dimensional interlocking interface for mechanically durable polymer electrolyte membrane fuel cells , 2019, Journal of Power Sources.

[23]  V. Freger,et al.  Understanding methods of preparation and characterization of pore-filling polymer composites for proton exchange membranes: a beginner’s guide , 2017 .

[24]  Dong Won Shin,et al.  Hydrocarbon-Based Polymer Electrolyte Membranes: Importance of Morphology on Ion Transport and Membrane Stability. , 2017, Chemical reviews.

[25]  Ki‐Hyun Kim,et al.  Enhanced physical stability and chemical durability of sulfonated poly(arylene ether sulfone) composite membranes having antioxidant grafted graphene oxide for polymer electrolyte membrane fuel cell applications , 2017 .

[26]  Dukjoon Kim,et al.  Poly(arylene ether ketone) proton exchange membranes grafted with long aliphatic pendant sulfonated groups for vanadium redox flow batteries , 2017 .

[27]  A. Weber,et al.  New Insights into Perfluorinated Sulfonic-Acid Ionomers. , 2017, Chemical reviews.

[28]  Hyejin Lee,et al.  Synthesis and characterization of multi-block poly(arylene ether sulfone) membranes with highly sulfonated blocks for use in polymer electrolyte membrane fuel cells , 2016 .

[29]  Nicolas Guillet,et al.  Investigation on the degradation of MEAs for PEM water electrolysers part I: Effects of testing conditions on MEA performances and membrane properties , 2016 .

[30]  Sanjay,et al.  Computational analysis of IR-SOFC: Transient, thermal stress, carbon deposition and flow dependency , 2016 .

[31]  L. Gubler,et al.  Stability and Degradation Mechanisms of Radiation-Grafted Polymer Electrolyte Membranes for Water Electrolysis. , 2016, ACS applied materials & interfaces.

[32]  Yunqi Li,et al.  An overview of the proton conductivity of nafion membranes through a statistical analysis , 2016 .

[33]  Sanjay,et al.  Computational analysis of IR-SOFC: Thermodynamic, electrochemical process and flow configuration dependency , 2016 .

[34]  J. Lee,et al.  Multiblock copolymers based on poly(p-phenylene)-co-poly(arylene ether sulfone ketone) with sulfonated multiphenyl pendant groups for polymer electrolyte fuel cell (PEMFC) application , 2015 .

[35]  Jinming Dai,et al.  Preparation and characterization of continuous carbon nanofiber-supported SPEEK composite membranes for fuel cell application , 2014 .

[36]  S. Yoon,et al.  Properties of sulfonated poly(arylene ether sulfone)/electrospun nonwoven polyacrylonitrile composite membrane for proton exchange membrane fuel cells , 2013 .

[37]  Sang Young Lee,et al.  Polyimide nonwoven fabric-reinforced, flexible phosphosilicate glass composite membranes for high-temperature/low-humidity proton exchange membrane fuel cells , 2012 .

[38]  D. Yu,et al.  Synthesis and characterization of intermolecular ionic cross-linked sulfonated poly(arylene ether sulfone)s for direct methanol fuel cells , 2012 .

[39]  Young Taik Hong,et al.  Crosslinked sulfonated poly(arylene ether sulfone) membranes for fuel cell application , 2012 .

[40]  Sang‐young Lee,et al.  SiO2 nanoparticles-coated poly(paraphenylene terephthalamide) nonwovens as reinforcing porous substrates for proton-conducting, sulfonated poly(arylene ether sulfone)-impregnated composite membranes , 2011 .

[41]  Yun Wang,et al.  A review of polymer electrolyte membrane fuel cells: Technology, applications,and needs on fundamental research , 2011 .

[42]  Huamin Zhang,et al.  Ion exchange membranes for vanadium redox flow battery (VRB) applications , 2011 .

[43]  Zhongfang Li,et al.  Preparation and properties of sulfonated poly(phthalazinone ether sulfone ketone)/zirconium sulfophenylphosphate/PTFE composite membranes , 2011 .

[44]  Na Young Kim,et al.  SiO2-coated polyimide nonwoven/Nafion composite membranes for proton exchange membrane fuel cells , 2011 .

[45]  Timothy J. Peckham,et al.  Structure‐Morphology‐Property Relationships of Non‐Perfluorinated Proton‐Conducting Membranes , 2010, Advanced materials.

[46]  S. Asghari,et al.  Study of PEM fuel cell performance by electrochemical impedance spectroscopy , 2010 .

[47]  Xin Wang,et al.  Multifunctional composite membrane based on a highly porous polyimide matrix for direct methanol fuel cells , 2010 .

[48]  Huamin Zhang,et al.  Hydrophilic treatment poly(tetrafluoroethylene) reinforced sulfonated poly(ether ether ketone) composite membrane for proton exchange membrane fuel cell application , 2009 .

[49]  M. Marrony,et al.  Durability study and lifetime prediction of baseline proton exchange membrane fuel cell under severe operating conditions , 2008 .

[50]  Timothy J. Peckham,et al.  Main-chain, statistically sulfonated proton exchange membranes: the relationships of acid concentration and proton mobility to water content and their effect upon proton conductivity , 2007 .

[51]  Thomas F. Fuller,et al.  XPS investigation of Nafion® membrane degradation , 2007 .

[52]  B. Yi,et al.  Sulfonated polyimide/PTFE reinforced membrane for PEMFCs , 2007 .

[53]  Huamin Zhang,et al.  Fabrication and characterization of a PTFE-reinforced integral composite membrane for self-humidifying PEMFC , 2007 .

[54]  J. Mcgrath,et al.  Directly copolymerized poly(arylene sulfide sulfone) disulfonated copolymers for PEM‐based fuel cell systems. I. Synthesis and characterization , 2005 .

[55]  Prabhuram Joghee,et al.  Preparation and characterization of hybrid Nafion–silica membrane doped with phosphotungstic acid for high temperature operation of proton exchange membrane fuel cells , 2004 .

[56]  J. Mcgrath,et al.  Influence of the bisphenol structure on the direct synthesis of sulfonated poly(arylene ether) copolymers. I , 2003 .

[57]  D. Bessarabov,et al.  Gas Permeation in PEM Water Electrolyzers , 2018 .

[58]  S. Yoon,et al.  Poly(amide-co-imide)-poly(trimellitic anhydride chloride-co-4,4′-methylenedianiline) nonwoven/sulfonated poly(arylene ether sulfone) composite membrane for proton exchange membrane fuel cells , 2013, Macromolecular Research.

[59]  F. Coms,et al.  Sulfonated poly(benzoyl paraphenylene) as a membrane for PEMFC: Ex situ and in situ experiments of thermal and chemical stability , 2013 .