Analysis of subcooled boiling flow with one-group interfacial area transport equation and bubble lift-off model

Abstract To enhance the multi-dimensional analysis capability for a subcooled boiling two-phase flow, the one-group interfacial area transport equation was improved with a source term for the bubble lift-off. It included the bubble lift-off diameter model and the lift-off frequency reduction factor model. The bubble lift-off diameter model took into account the bubble's sliding on a heated wall after its departure from a nucleate site, and the lift-off frequency reduction factor was derived by considering the coalescences of the sliding bubbles. To implement the model, EAGLE (elaborated analysis of gas–liquid evolution) code was developed for a multi-dimensional analysis of two-phase flow. The developed model and EAGLE code were validated with the experimental data of SUBO (subcooled boiling) and SNU (Seoul National University) test, where the subcooled boiling phenomena in a vertical annulus channel were observed. Locally measured two-phase flow parameters included a void fraction, interfacial area concentration, and bubble velocity. The results of the computational analysis revealed that the interfacial area transport equation with the bubble lift-off model showed a good agreement with the experimental results of SUBO and SNU. It demonstrates that the source term for the wall nucleation by considering a bubble sliding and lift-off mechanism enhanced the prediction capability for the multi-dimensional behavior of void fraction or interfacial area concentration in the subcooled boiling flow. From the point of view of the bubble velocity, the modeling of an increased turbulence induced by boiling bubbles at the heated wall enhanced the prediction capability of the code.

[1]  T. H. Lee,et al.  Local flow characteristics of subcooled boiling flow of water in a vertical concentric annulus , 2002 .

[2]  N. Zuber,et al.  The dynamics of vapor bubbles in nonuniform temperature fields , 1961 .

[3]  Wei Yao,et al.  Volumetric interfacial area prediction in upward bubbly two-phase flow , 2004 .

[4]  Mamoru Ishii,et al.  Two-group interfacial area transport equations at bubbly-to-slug flow transition , 2000 .

[5]  Renwei Mei,et al.  Vapor bubble departure in forced convection boiling , 1993 .

[6]  Mamoru Ishii,et al.  One-group interfacial area transport in vertical bubbly flow , 1998 .

[7]  Jiyuan Tu,et al.  A unified model considering force balances for departing vapour bubbles and population balance in subcooled boiling flow , 2005 .

[8]  M. Ishii,et al.  Thermo-Fluid Dynamics of Two-Phase Flow , 2007 .

[9]  Mamoru Ishii,et al.  Interfacial area and nucleation site density in boiling systems , 1983 .

[10]  Won-Pil Baek,et al.  THERMAL-HYDRAULIC TESTS AND ANALYSES FOR THE APR1400'S DEVELOPMENT AND LICENSING , 2007 .

[11]  M. Ishii,et al.  Flow structure of subcooled boiling flow in an internally heated annulus , 2004 .

[12]  Mamoru Ishii,et al.  Foundation of the interfacial area transport equation and its closure relations , 1995 .

[13]  M. Ishii.  Thermo-fluid dynamic theory of two-phase flow , 1975 .

[14]  R. Mei,et al.  A unified model for the prediction of bubble detachment diameters in boiling systems—II. Flow boiling , 1993 .

[15]  H. C. Ünal,et al.  Maximum bubble diameter, maximum bubble-growth time and bubble-growth rate during the subcooled nucleate flow boiling of water up to 17.7 MN/m2 , 1976 .

[16]  A. A. Amsden,et al.  The SMAC method: A numerical technique for calculating incompressible fluid flow , 1970 .

[17]  Jiyuan Tu,et al.  On the modelling of population balance in isothermal vertical bubbly flows - average bubble number density approach , 2007 .

[18]  H. Yoon,et al.  Computational Analysis of a Subcooled Boiling Flow with a One-group Interfacial Area Transport Equation , 2008 .

[19]  Mamoru Ishii,et al.  Development of one-group interfacial area transport equation in bubbly flow systems , 2002 .

[20]  R. Lahey.  The simulation of multidimensional multiphase flows , 2005 .

[21]  Mamoru Ishii,et al.  Interfacial area transport equation: model development and benchmark experiments , 2002 .

[22]  Dong-Jin Euh,et al.  Characteristics of the local bubble parameters of a subcooled boiling flow in an annulus , 2010 .

[23]  Mamoru Ishii,et al.  DEVELOPMENT OF INTERFACIAL AREA TRANSPORT EQUATION , 2005 .

[24]  Mamoru Ishii,et al.  Two-fluid model and hydrodynamic constitutive relations , 1984 .

[25]  Michitsugu Mori,et al.  Bubble Lift-off Size in Forced Convective Subcooled Boiling Flow , 2005 .

[26]  N. Zuber,et al.  Drag coefficient and relative velocity in bubbly, droplet or particulate flows , 1979 .

[27]  Eckhard Krepper,et al.  CFD modelling of subcooled boiling—Concept, validation and application to fuel assembly design , 2007 .