Effect of Na doping on the performance and the band alignment of CZTS/CdS thin film solar cell

Abstract Alkali doping can suppress deleterious antisite defects in kesterite Cu2ZnSnS4 (CZTS) and improve the open-circuit voltage. In this study, the effects of light Na-doping on the performance and the band alignment of CZTS/CdS thin-film solar cells were investigated. CZTS:Na thin films were fabricated by the spin coating with 10% Na doping on the surface of CZTS. The Na-doping led to the narrower FWHM and larger grain size. The hole concentration and the conductivity were improved due to the NaZn shallow acceptor defects. In addition, Na-doping can improve the band alignment of absorber/buffer interface and inhibit SRH recombination by the Na passivation effect and the suppression of SnZn defects. The typical cliff-like conduction band offset (CBO) was reduced from 0.25 eV in CZTS:Na/CdS to 0.1 eV in CZTS/CdS heterojunction. CZTS:Na device exhibited a higher Voc of 653 mV than that of CZTS/CdS device. The maximum conversion efficiency reached 7.46%, increased by 44% after Na-doping. These results clarify the effect of Na-doping on the band structure of the heterojunction in CZTS solar cells and support a new aspect that synthesis of a surface-doping CZTS:Na absorber has great potential for future research.

[1]  M. Fahoume,et al.  A review on the numerical modeling of CdS/CZTS-based solar cells , 2019, Applied Physics A.

[2]  Yang Yang,et al.  Rational defect passivation of Cu2ZnSn(S,Se)4 photovoltaics with solution-processed Cu2ZnSnS4:Na nanocrystals. , 2013, Journal of the American Chemical Society.

[3]  I. Repins,et al.  Effects of sodium incorporation in Co-evaporated Cu2ZnSnSe4 thin-film solar cells , 2013 .

[4]  A. Walsh,et al.  Compositional dependence of structural and electronic properties of Cu(2)ZnSn(S,Se)(4) alloys for thin film solar cells , 2011 .

[5]  Philip Jackson,et al.  Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6% , 2016 .

[6]  P. Hering,et al.  The band alignment of Cu2O/ZnO and Cu2O/GaN heterostructures , 2012 .

[7]  Mowafak Al-Jassim,et al.  Comparative study of the luminescence and intrinsic point defects in the kesterite Cu2ZnSnS4 and chalcopyrite Cu(In,Ga)Se2 thin films used in photovoltaic applications , 2011 .

[8]  Takashi Minemoto,et al.  Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation , 2001 .

[9]  Martin A. Green,et al.  Solar cell efficiency tables (Version 55) , 2019, Progress in Photovoltaics: Research and Applications.

[10]  T. Zhai,et al.  Synthesis, Crystal Structure, and Optical Properties of Noncentrosymmetric Na2ZnSnS4. , 2018, Inorganic chemistry.

[11]  C. Malerba,et al.  Valence band offset at the CdS/Cu2ZnSnS4 interface probed by x-ray photoelectron spectroscopy , 2013 .

[12]  Hideaki Araki,et al.  Development of CZTS-based thin film solar cells , 2009 .

[13]  I. Repins,et al.  19·9%‐efficient ZnO/CdS/CuInGaSe2 solar cell with 81·2% fill factor , 2008 .

[14]  Z. Zeng,et al.  An investigation of Na-related defects in Cu2ZnSnSe4. , 2017, Physical chemistry chemical physics : PCCP.

[15]  S. Siebentritt,et al.  What is the bandgap of kesterite , 2016 .

[16]  Tayfun Gokmen,et al.  Band tailing and efficiency limitation in kesterite solar cells , 2013 .

[17]  Rakesh Agrawal,et al.  Synthesis of Cu2ZnSnS4 nanocrystal ink and its use for solar cells. , 2009, Journal of the American Chemical Society.

[18]  Hans Zogg,et al.  Na incorporation into Cu(In,Ga)Se2 for high-efficiency flexible solar cells on polymer foils , 2005 .

[19]  Hans Zogg,et al.  Efficiency enhancement of Cu(In,Ga)Se2 solar cells due to post-deposition Na incorporation , 2004 .

[20]  M. B. Rabeh,et al.  Effect of Na doping on structural and optical properties in Cu2ZnSnS4 thin films synthesized by thermal evaporation method , 2019, Thin Solid Films.

[21]  J. Chu,et al.  Structure, composition and optical properties of Cu2ZnSnS4 thin films deposited by Pulsed Laser Deposition method , 2011 .

[22]  W. Chim,et al.  Band alignment of yttrium oxide on various relaxed and strained semiconductor substrates , 2008 .

[23]  J. Kim,et al.  Alignment of energy levels at the ZnS/Cu(In,Ga)Se2 interface , 2011 .

[24]  I. Konovalov,et al.  Material requirements for CIS solar cells , 2004 .

[25]  V. Dutta,et al.  Deposition of Kesterite Cu2ZnSnS4 (CZTS) Thin Films by Spin Coating Technique for Solar Cell Application , 2013 .

[26]  E. Carter,et al.  Role of Na and Ca as Isovalent Dopants in Cu2ZnSnS4 Solar Cells , 2019, ACS Sustainable Chemistry & Engineering.

[27]  S. M. Lee,et al.  Improved Photovoltaic Characteristics and Grain Boundary Potentials of CuIn0.7Ga0.3Se2 Thin Films Spin-Coated by Na-Dissolved Nontoxic Precursor Solution. , 2016, ACS applied materials & interfaces.

[28]  C. Ferekides,et al.  Thin‐film CdS/CdTe solar cell with 15.8% efficiency , 1993 .

[29]  Litao Chen,et al.  The preparation of CuInSe2 films by combustion method and non-vacuum spin-coating process , 2010 .

[30]  B. Liu,et al.  Cliff-like conduction band offset at CdS/Cu2ZnSnS4 heterojunction prepared by sputtering CuSn alloy target using different stacking order , 2019, Solar Energy.

[31]  Martin A. Green,et al.  Over 9% Efficient Kesterite Cu2ZnSnS4 Solar Cell Fabricated by Using Zn1–xCdxS Buffer Layer , 2016 .

[32]  Wei Wang,et al.  Device Characteristics of CZTSSe Thin‐Film Solar Cells with 12.6% Efficiency , 2014 .

[33]  Xiaoxin Li,et al.  Na incorporation controlled single phase kesterite Cu2ZnSnS4 solar cell material , 2020 .

[34]  Dong Xu,et al.  Fabrication of Cu2ZnSnS4 screen printed layers for solar cells , 2010 .

[35]  Interface Structure and Band Alignment of CZTS/CdS Heterojunction: An Experimental and First-Principles DFT Investigation , 2019, Materials.

[36]  Pavel Moroz,et al.  Improving the catalytic activity of semiconductor nanocrystals through selective domain etching. , 2013, Nano letters.

[37]  D. Mitzi,et al.  The Role of Sodium as a Surfactant and Suppressor of Non‐Radiative Recombination at Internal Surfaces in Cu2ZnSnS4 , 2015 .

[38]  H. Katagiri,et al.  Preparation and evaluation of Cu2ZnSnS4 thin films by sulfurization of EB evaporated precursors , 1997 .

[39]  V. Dutta,et al.  Bi-nanoparticle (CdTe and CdSe) mixed polyaniline hybrid thin films prepared using spin coating technique , 2009 .

[40]  S. Nishiwaki,et al.  Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells. , 2014, Physical chemistry chemical physics : PCCP.