Pressing Temperature Effect on the Properties of Medium Density Particleboard Made with Sugarcane Bagasse and Plastic Bags

2022 The objective of this work was to evaluate the effects of different pressing temperatures on the physical and mechanical properties of Medium Density Particleboard (MDP) manufactured with sugarcane bagasse and waste plastic bags.The temperatures of 160, 180, 200 and 220ºC were evaluated for the panels pressing. The panels were produced with a nominal density of 0.70 g/cm 3 , a face/core ratio of 40:60, 12% urea-formaldehyde adhesive for the faces and 8% for the core. The panels were evaluated for properties of density, compaction ratio, humidity, water absorption after two and twenty-four hours (WA2h and WA24h), thickness swelling after 2 and 24 hours of immersion in water (TS2h and TS24h), module of rupture (MOR) and module of elasticity (MOE) in static bending, internal bonding, janka hardness and screw pulling. There was no significant effect of pressing temperature on density, MOR, MOE, internal bonding and janka hardness of the panels.The pressing temperature significantly influenced the properties of WA, TS and screw pullout, promoting a decrease in the mean values of WA2h, WA24h, TS2h and TS, and an increase in screw pullout resistance. The temperature of 220°C resulted in MDP panels with sugarcane bagasse and residual plastic bags of better

[1]  Cécile Bulle,et al.  Wood forest resource consumption impact assessment based on a scarcity index accounting for wood functionality and substitutability (WoodSI) , 2021, The International Journal of Life Cycle Assessment.

[2]  G. B. Júnior,et al.  Technological characterization of particleboards made with sugarcane bagasse and bamboo culm particles , 2020 .

[3]  R. F. Mendes,et al.  Effect of Heat Treatment on the Properties of Sugarcane Bagasse Medium Density Particleboard (MDP) Panels , 2020 .

[4]  J. Wachira,et al.  Characterization of Prototype Formulated Particleboards from Agroindustrial Lignocellulose Biomass Bonded with Chemically Modified Cassava Peel Starch , 2019, Advances in Materials Science and Engineering.

[5]  Maximiliano dos Anjos Azambuja,et al.  Painéis de pínus e bagaço de cana empregando-se dois adesivos para uso na construção civil , 2019 .

[6]  Felipe Augusto Santiago Hansted,et al.  The use of nanocellulose in the production of medium density particleboard panels and the modification of its physical properties , 2019, BioResources.

[7]  F. Barreca,et al.  Innovative use of giant reed and cork residues for panels of buildings in Mediterranean area , 2019, Resources, Conservation and Recycling.

[8]  J. d’Almeida,et al.  Mechanical and physical screw withdrawal properties behavior of agglomerated panels reinforced with coir and pejibaye fibers , 2018 .

[9]  J. Fiorelli,et al.  Study of the production process of 3-layer sugarcane-bamboo-based particleboards , 2018, Construction and Building Materials.

[10]  Wei Xiong.  Bagasse composites , 2018 .

[11]  L. Mendes,et al.  Urea Formaldehyde and Cellulose Nanocrystals Adhesive: Studies Applied to Sugarcane Bagasse Particleboards , 2018, Journal of Polymers and the Environment.

[12]  L. Mendes,et al.  Addition of Different Proportions of Castor Husk and Pine Wood in Particleboards , 2018 .

[13]  L. Mendes,et al.  Valorização do bagaço de cana-de-açúcar na produção de painéis aglomerados de baixa densidade , 2017 .

[14]  Eduardo Luis Schneider,et al.  Polietileno de baixa densidade - PEBD: mercado, produção, principais propriedades e aplicações , 2017 .

[15]  L. Mendes,et al.  Eucalyptus wood and coffee parchment for particleboard production: Physical and mechanical properties , 2017 .

[16]  S. M. Sapuan,et al.  Thermal, mechanical, and physical properties of seaweed/sugar palm fibre reinforced thermoplastic sugar palm Starch/Agar hybrid composites. , 2017, International journal of biological macromolecules.

[17]  Simon Curling,et al.  Feasibility of using straw in a strong, thin, pulp moulded packaging material , 2017 .

[18]  L. Mendes,et al.  Inclusão de resíduo da cultura de sorgo em painéis aglomerados de eucalipto , 2017 .

[19]  L. Mendes,et al.  The Effect of Post-Heat Treatment in MDF Panels , 2017 .

[20]  L. Bufalino,et al.  TRANSFORMING RICE HUSK INTO A HIGH-ADDED VALUE PRODUCT : POTENTIAL FOR PARTICLEBOARD , 2017 .

[21]  R. Battistelle,et al.  Physical and Mechanical Characterization of Sugarcane Bagasse Particleboards for Civil Construction , 2016 .

[22]  L. Mendes,et al.  Particleboard Panels Made from Sugarcane Bagasse: Characterization for Use in the Furniture Industry , 2016 .

[23]  L. Mendes,et al.  MDP com partículas de eucalipto e palha de milho , 2015 .

[24]  L. Bufalino,et al.  Chemical treatment of banana tree pseudostem particles aiming the production of particleboards , 2014 .

[25]  Laurenn Borges de Macedo,et al.  Use of Coffee Plant Stem in the Production of Conventional Particleboards , 2014 .

[26]  A. Rosenkranz,et al.  Feasibility Study on the Production of Particleboard from Maize Cobs, Rice Husks, and Groundnut Shells Using Acacia Mimosa Tannin Extract as the Bonding Adhesive , 2014 .

[27]  Lourival Marin Mendes,et al.  Brazilian Lignocellulosic Wastes for Bioenergy Production: Characterization and Comparison with Fossil Fuels , 2013 .

[28]  R. F. Mendes,et al.  Effect of thermal treatment on properties of OSB panels , 2012, Wood Science and Technology.

[29]  A. Ashori,et al.  Evaluation of surface roughness and mechanical properties of particleboard panels made from bagasse , 2011 .

[30]  Lourival Marin Mendes,et al.  Hybrid chipboard panels based on sugarcane bagasse, urea formaldehyde and melamine formaldehyde resin , 2011 .

[31]  Rosimeire Cavalcante dos Santos,et al.  Painéis aglomerados produzidos com bagaço de cana em associação com madeira de eucalipto , 2010 .

[32]  L. Bufalino,et al.  THE ADHESIVE EFFECT ON THE PROPERTIES OF PARTICLEBOARDS MADE FROM SUGAR CANE BAGASSE GENERATED IN THE DISTILLER , 2009 .

[33]  Poliana Dias de Moraes,et al.  Comportamento da madeira a temperaturas elevadas , 2009 .

[34]  Kestur Gundappa Satyanarayana,et al.  Studies on lignocellulosic fibers of Brazil. Part I: Source, production, morphology, properties and applications , 2007 .

[35]  Luiz Claudio de Santa Maria,et al.  Polietileno: principais tipos, propriedades e aplicações , 2003 .

[36]  R. Rowell,et al.  Characterization and Factors Effecting Fiber Properties , 2000 .

[37]  M. Souza,et al.  Resistência físico-mecânica de chapas aglomeradas de bagaço de cana-de-açúcar modificado quimicamente , 1997 .

[38]  J. Kennedy,et al.  Wood and cellulosics: Industrial utilisation, biotechnology, structure, and properties , 1987 .

[39]  L. F. Hawley,et al.  The chemistry of wood , 1926 .