Power modulation based fiber-optic loop-sensor having a dual measurement range

A fiber-optic sensor is investigated in this work for potential applications in structural health monitoring. The sensor, called fiber-loop-sensor, is based on bending an optical fiber beyond a critical radius to obtain intensity losses and calibrating the losses with respect to the applied force or displacement. Additionally, in the present case, the use of single-mode optical fibers allows the appearance of several resonance peaks in the transmitted power-displacement graph. The intensity of one of these resonances can be tracked in a narrow range to obtain high sensitivity. Experimental results show that the resolution of 10−4 N for force and 10−5 m for displacement can be obtained in these sensors. The sensors are calibrated for various loop radii and for various loading rates. They are also tested under loading-unloading conditions for over 104 cycles to observe their fatigue behavior. The sensors show very repeatable response and no degradation in performance under these test conditions. Simple cons...

[1]  C. K. Asawa,et al.  High-sensitivity fibre-optic strain sensors for measuring structural distortion , 1982 .

[2]  H. Renner,et al.  Bending losses of coated single-mode fibers: a simple approach , 1992 .

[3]  A. Meldrum,et al.  Silicon nanocrystal luminescence coupled to whispering gallery modes in optical fibers , 2009 .

[4]  D. Marcuse.  Theory of dielectric optical waveguides , 1974 .

[5]  Qian Wang,et al.  Theoretical and experimental investigations of macro-bend losses for standard single mode fibers. , 2005, Optics express.

[6]  Kimihiro Adachi,et al.  A novel fiber-optic gas-sensing configuration using extremely curved optical fibers and an attempt for optical humidity detection , 1998 .

[7]  D.J. DiGiovanni,et al.  The microfiber loop resonator: theory, experiment, and application , 2006, Journal of Lightwave Technology.

[8]  Hidam Kumarjit Singh,et al.  All-fiber optic sensor for measurement of liquid refractive index , 2008 .

[9]  Young-Geun Han,et al.  Directional bending sensor with temperature insensitivity using a sampled chirped fiber Bragg grating , 2009 .

[10]  Y. Murakami,et al.  Bending losses of coated single-mode optical fibers , 1978 .

[11]  Dietrich Marcuse,et al.  Curvature loss formula for optical fibers , 1976 .

[12]  M. Gorodetsky,et al.  Ultimate Q of optical microsphere resonators. , 1996, Optics letters.

[13]  Ronald W. Waynant,et al.  All-fiber-optic sensor for liquid level measurement , 1999 .

[14]  Fei Luo,et al.  A fiber optic microbend sensor for distributed sensing application in the structural strain monitoring , 1999 .

[15]  P. G. Harper,et al.  Wavelength dependence of bending loss in monomode optical fibers: effect of the fiber buffer coating. , 1990, Optics letters.

[16]  T Sasayama,et al.  Knocking Detection of a Gasoline Engine by Utilizing an Optical Fiber with Specific Refractive-index Composition. , 1998, Applied optics.

[17]  I. Valiente,et al.  New formalism for bending losses in coated single-mode optical fibres , 1989 .

[18]  P. Lu,et al.  A multiplexed fiber Bragg grating sensor for simultaneous salinity and temperature measurement , 2008 .

[19]  M. Porfiri,et al.  Thermal conductivity of multiphase particulate composite materials , 2009 .

[20]  J. H. Cole,et al.  Improved Bend Loss Formula Verified for Optical Fiber by Simulation and Experiment , 2007, IEEE Journal of Quantum Electronics.

[21]  Giuseppe Martini,et al.  Bend loss in single-mode fibers , 1997 .

[22]  A. Harris,et al.  Bend loss measurements on high numerical aperture single-mode fibers as a function of wavelength and bend radius , 1986 .

[23]  Ph. Tsalides,et al.  A low-cost fiber optic force sensor , 1996 .