A consistent refinement of first-order shear deformation theory for laminated composite and sandwich plates using improved zigzag kinematics

A refined zigzag theory is presented for laminated-composite and sandwich plates that includes the kinematics of first-order shear-deformation theory as its baseline. The theory is variationally consistent and is derived from the virtual work principle. Novel piecewise-linear zigzag functions that provide a more realistic representation of the deformation states of transverse-shear-flexible plates than other similar theories are used. The formulation does not enforce full continuity of the transverse shear stresses across the plate's thickness, yet is robust. Transverse-shear correction factors are not required to yield accurate results. The theory is devoid of the shortcomings inherent in the previous zigzag theories including shear-force inconsistency and difficulties in simulating clamped boundary conditions, which have greatly limited the accuracy of these theories. This new theory requires only C0-continuous kinematic approximations and is perfectly suited for developing computationally efficient finite elements. The theory should be useful for obtaining relatively efficient, accurate estimates of structural response needed to design high-performance load-bearing aerospace structures

[1]  M. D. Sciuva,et al.  BENDING, VIBRATION AND BUCKLING OF SIMPLY SUPPORTED THICK MULTILAYERED ORTHOTROPIC PLATES: AN EVALUATION OF A NEW DISPLACEMENT MODEL , 1986 .

[2]  J. Reddy.  Mechanics of laminated composite plates and shells : theory and analysis , 1996 .

[3]  Ronald C. Averill,et al.  Development of simple, robust finite elements based on refined theories for thick laminated beams , 1996 .

[4]  Dahsin Liu,et al.  An Overall View of Laminate Theories Based on Displacement Hypothesis , 1996 .

[5]  Alexander Tessler,et al.  An improved plate theory of {1,2}-order for thick composite laminates , 1993 .

[6]  Marco Di Sciuva.  A refinement of the transverse shear deformation theory for multilayered of orthotropic plates , 1983 .

[7]  N. Pagano,et al.  Exact Solutions for Composite Laminates in Cylindrical Bending , 1969 .

[8]  Ronald C. Averill,et al.  Static and dynamic response of moderately thick laminated beams with damage , 1994 .

[9]  Marco Di Sciuva,et al.  Multilayered anisotropic plate models with continuous interlaminar stresses , 1992 .

[10]  E. Reissner,et al.  Reflections on the Theory of Elastic Plates , 1985 .

[11]  Stefanos Vlachoutsis,et al.  Shear correction factors for plates and shells , 1992 .

[12]  D. Hodges,et al.  A critical evaluation of two Reissner–Mindlin type models for composite laminated plates , 2008 .

[13]  J. Reddy.  A Simple Higher-Order Theory for Laminated Composite Plates , 1984 .

[14]  Erdogan Madenci,et al.  Equivalent single-layer theory for a complete stress field in sandwich panels under arbitrarily distributed loading , 2002 .

[15]  Hidenori Murakami,et al.  A high-order laminated plate theory with improved in-plane responses☆ , 1987 .

[16]  G. Arfken.  Mathematical Methods for Physicists , 1967 .

[17]  M. Gherlone,et al.  Refinement of Timoshenko Beam Theory for Composite and Sandwich Beams Using Zigzag Kinematics , 2007 .

[18]  C. Sun,et al.  Theories for the Dynamic Response of Laminated Plates , 1973 .

[19]  M. Di Sciuva,et al.  An Improved Shear-Deformation Theory for Moderately Thick Multilayered Anisotropic Shells and Plates , 1987 .

[20]  Maenghyo Cho,et al.  An efficient higher-order plate theory for laminated composites , 1992 .

[21]  L. Librescu,et al.  Implications of damaged interfaces and of other non-classical effects on the load carrying capacity of multilayered composite shallow shells , 2002 .

[22]  K. Vijayakumar,et al.  Lamination-dependent shear deformation models for cylindrical bending of angle-ply laminates , 1995 .

[23]  Marco Gherlone,et al.  Refined Zigzag Theory for Laminated Composite and Sandwich Plates , 2015 .

[24]  Ahmed K. Noor,et al.  Three-dimensional solutions for antisymmetrically laminated anisotropic plates , 1990 .

[25]  E. Reissner.  On a certain mixed variational theorem and a proposed application , 1984 .

[26]  Ahmed K. Noor,et al.  Assessment of Shear Deformation Theories for Multilayered Composite Plates , 1989 .

[27]  R. Christensen,et al.  A HIGH-ORDER THEORY OF PLATE DEFORMATION, PART 1: HOMOGENEOUS PLATES , 1977 .

[28]  Marco Di Sciuva,et al.  Development of an anisotropic, multilayered, shear-deformable rectangular plate element , 1985 .

[29]  R. Christensen,et al.  A High-Order Theory of Plate Deformation—Part 2: Laminated Plates , 1977 .

[30]  Marco Di Sciuva,et al.  A refined transverse shear deformation theory for multilayered anisotropic plates. , 1984 .

[31]  M. D. Sciuva.  Evaluation of some multilayered, shear-deformable plate elements , 1985 .

[32]  K. Bhaskar,et al.  Analytical solutions for flexure of clamped rectangular cross-ply plates using an accurate zig–zag type higher-order theory , 2006 .

[33]  Hidenori Murakami,et al.  Laminated Composite Plate Theory With Improved In-Plane Responses , 1986 .

[34]  J. Reddy.  Mechanics of laminated composite plates : theory and analysis , 1997 .

[35]  Maenghyo Cho,et al.  Enhanced modeling of laminated and sandwich plates via strain energy transformation , 2006 .

[36]  Maenghyo Cho,et al.  Efficient higher order composite plate theory for general lamination configurations , 1993 .

[37]  Maenghyo Cho,et al.  Enhanced First-Order Shear Deformation Theory for Laminated and Sandwich Plates , 2005 .

[38]  Wenbin Yu,et al.  Mathematical construction of a Reissner¿Mindlin plate theory for composite laminates , 2005 .

[39]  Alexander Tessler,et al.  A {3,2}-order bending theory for laminated composite and sandwich beams , 1998 .

[40]  Liviu Librescu,et al.  A comprehensive analysis of the state of stress of elastic anisotropic flat plates using refined theories , 1987 .