The Varying Compliance Resonance in a Ball Bearing Rotor System Affected by Different Ball Numbers and Rotor Eccentricities
暂无分享,去创建一个
Zhiyong Zhang | Yushu Chen | Rui Yang | Lei Hou | Yulin Jin | Yushu Chen | L. Hou | Yulin Jin | Zhiyong Zhang | R. Yang
[1] Pradeep K. Gupta,et al. Dynamics of Rolling-Element Bearings—Part III: Ball Bearing Analysis , 1979 .
[2] Yushu Chen,et al. Bifurcations and hysteresis of varying compliance vibrations in the primary parametric resonance for a ball bearing , 2015 .
[3] N. Tandon,et al. Nonlinear Vibration Analysis of an Elastic Rotor Supported on Angular Contact Ball Bearings Considering Six Degrees of Freedom and Waviness on Balls and Races , 2014 .
[4] B. C. Nakra,et al. TECHNICAL ARTICLE practical articles in shock and vibration technology: Vibration and Acoustic Monitoring Techniques for the Detection of Defects in Rolling Element Bearings -- a Review , 1992 .
[5] Sadok Sassi,et al. A Numerical Model to Predict Damaged Bearing Vibrations , 2007 .
[6] Eric J. Hahn,et al. Transient rotordynamic modeling of rolling element bearing systems , 2001 .
[7] J. M. de Mul,et al. Equilibrium and Associated Load Distribution in Ball and Roller Bearings Loaded in Five Degrees of Freedom While Neglecting Friction—Part II: Application to Roller Bearings and Experimental Verification , 1989 .
[8] A. B. Jones. A General Theory for Elastically Constrained Ball and Radial Roller Bearings Under Arbitrary Load and Speed Conditions , 1960 .
[9] N. Tandon,et al. A review of vibration and acoustic measurement methods for the detection of defects in rolling element bearings , 1999 .
[10] J. M. de Mul,et al. Equilibrium and Associated Load Distribution in Ball and Roller Bearings Loaded in Five Degrees of Freedom While Neglecting Friction—Part I: General Theory and Application to Ball Bearings , 1989 .
[11] R. Gohar,et al. The effects of number of balls and preload on vibrations associated with ball bearings , 1997 .
[12] P. D. McFadden,et al. Vibration monitoring of rolling element bearings by the high-frequency resonance technique — a review , 1984 .
[13] Satish C. Sharma,et al. Vibration based performance prediction of ball bearings caused by localized defects , 2012 .
[14] Robert B. Randall. Frequency Analysis , 1987 .
[15] Qingyu Xu,et al. Subharmonic resonance of a symmetric ball bearing–rotor system , 2013 .
[16] P. K. Kankar,et al. Stability analysis of a rotor bearing system due to surface waviness and number of balls , 2004 .
[17] N Aktärk,et al. The effect of ball size variation on vibrations associated with ball-bearings , 1998 .
[18] Yukio Ishida,et al. Subharmonic and Summed-and-Differential Harmonic Oscillations of an Unsymmetrical Rotor , 1981 .
[19] Yu Zhang,et al. Vibration response mechanism of faulty outer race rolling element bearings for quantitative analysis , 2016 .
[20] G. Jang,et al. Nonlinear excitation model of ball bearing waviness in a rigid rotor supported by two or more ball bearings considering five degrees of freedom , 2001 .
[21] C. S. Sunnersjö. Varying compliance vibrations of rolling bearings , 1978 .
[22] P. K. Gupta,et al. Dynamics of Rolling-Element Bearings—Part I: Cylindrical Roller Bearing Analysis , 1979 .
[23] Miha Boltežar,et al. Improved model of a ball bearing for the simulation of vibration signals due to faults during run-up , 2011 .
[24] Yimin Shao,et al. Dynamic modeling for rigid rotor bearing systems with a localized defect considering additional deformations at the sharp edges , 2017 .
[25] Yukio Ishida,et al. The Particular Vibration Phenomena Due to Ball Bearings at the Major Critical Speed , 1973 .
[26] Lei Hou,et al. Nonlinear vibration analysis of a cracked rotor-ball bearing system during flight maneuvers , 2016 .
[27] Robert B. Randall,et al. USING TRANSIENT ANALYSIS SOFTWARE TO SIMULATE VIBRATION SIGNALS DUE TO ROLLING ELEMENT BEARING DEFECTS , 2002 .
[28] Nizami Aktürk,et al. The Effect of Waviness on Vibrations Associated Witli Ball Bearings , 1999 .
[29] S. Harsha,et al. Nonlinear dynamic analysis of high speed bearings due to combined localized defects , 2014 .
[30] Ravi Prakash,et al. Effects of Preload and Number of Balls on Nonlinear Dynamic Behavior of Ball Bearing System , 2003 .
[31] Zhengjia He,et al. Dynamic Modeling and Vibration Response Simulation for High Speed Rolling Ball Bearings With Localized Surface Defects in Raceways , 2014 .
[32] Fulei Chu,et al. Recent advances in time–frequency analysis methods for machinery fault diagnosis: A review with application examples , 2013 .
[33] Hamid Moeenfard,et al. Nonlinear dynamic modeling of surface defects in rolling element bearing systems , 2009 .
[34] Kshitij Gupta,et al. Experimental Study of a Rotor Supported by Deep Groove Ball Bearing , 2002 .
[35] T. C. Gupta,et al. Instability and Chaos of a Flexible Rotor Ball Bearing System: An Investigation on the Influence of Rotating Imbalance and Bearing Clearance , 2011 .
[36] J. Guyader,et al. Routes To Chaos In Ball Bearings , 1993 .
[37] Jérôme Antoni,et al. Envelope analysis of rotating machine vibrations in variable speed conditions: A comprehensive treatment , 2017 .
[38] Aki Mikkola,et al. Dynamic model of a deep-groove ball bearing including localized and distributed defects. Part 1: Theory , 2003 .
[39] Lei Hou,et al. Turning maneuver caused response in an aircraft rotor-ball bearing system , 2015 .
[40] Fulei Chu,et al. Application of the wavelet transform in machine condition monitoring and fault diagnostics: a review with bibliography , 2004 .
[41] A. Ahmadi,et al. Analysis of bearing stiffness variations, contact forces and vibrations in radially loaded double row rolling element bearings with raceway defects , 2015 .
[42] S. Harsha. Nonlinear dynamic analysis of a high-speed rotor supported by rolling element bearings , 2006 .
[43] Robert B. Randall,et al. Simulating gear and bearing interactions in the presence of faults. Part I. The combined gear bearing dynamic model and the simulation of localised bearing faults , 2008 .
[44] Jing Liu,et al. Vibration analysis of ball bearings with a localized defect applying piecewise response function , 2012 .
[45] 张小龙,et al. NONLINEAR STABILITY OF BALANCED ROTOR DUE TO EFFECT OF BALL BEARING INTERNAL CLEARANCE , 2006 .
[46] S. Harsha,et al. Non-linear dynamic behaviors of rolling element bearings due to surface waviness , 2004 .
[47] E. Rigaud,et al. Experiments and numerical results on non-linear vibrations of an impacting Hertzian contact. Part 1: harmonic excitation , 2003, physics/0701032.
[48] Jing Yuan,et al. Multiwavelet transform and its applications in mechanical fault diagnosis – A review , 2014 .
[49] J. Guyader,et al. Experiments on routes to chaos in ball bearings , 2008 .
[50] M. Cao,et al. A comprehensive dynamic model of double-row spherical roller bearing—Model development and case studies on surface defects, preloads, and radial clearance , 2008 .
[51] Nizami Aktürk,et al. An Investigation of Rolling Element Vibrations Caused by Local Defects , 2008 .
[52] Linkai Niu,et al. A systematic study of ball passing frequencies based on dynamic modeling of rolling ball bearings with localized surface defects , 2015 .
[53] C. Walters. The dynamics of ball bearings , 1971 .
[54] G. Jang,et al. Stability Analysis of a Rotating System Due to the Effect of Ball Bearing Waviness , 2003 .
[55] Yukio Ishida,et al. The Particular Vibration Phenomena Due to Ball Bearings at the Mayor Critical Speed : 2nd report, On the Effects of Symmetrical Nonlinear Spring Characteristics , 1976 .
[56] Yimin Shao,et al. A New Model for the Relationship Between Vibration Characteristics Caused by the Time-Varying Contact Stiffness of a Deep Groove Ball Bearing and Defect Sizes , 2015 .
[57] Xu Qingyu,et al. Dynamic model of ball bearings with internal clearance and waviness , 2006 .
[58] Robert B. Randall,et al. Simulating gear and bearing interactions in the presence of faults Part II. Simulation of the vibrations produced by extended bearing faults , 2008 .
[59] Michael D. Bryant,et al. Dynamic Modeling of Rolling Element Bearings With Surface Contact Defects Using Bond Graphs , 2011 .
[60] Xuening Zhang,et al. A comprehensive dynamic model to investigate the stability problems of the rotor–bearing system due to multiple excitations , 2016 .
[61] B. Paul,et al. Advanced Dynamics of Rolling Elements , 1984 .
[62] Robert B. Randall,et al. Rolling element bearing diagnostics—A tutorial , 2011 .
[63] Rui Yang,et al. Experiments and Numerical Results for Varying Compliance Contact Resonance in a Rigid Rotor–Ball Bearing System , 2017 .
[64] T. A. Harris,et al. Essential Concepts of Bearing Technology , 2006 .
[65] Gun-Hee Jang,et al. Vibration analysis of a rotating system due to the effect of ball bearing waviness , 2004 .
[66] Lei Hou,et al. Application of the HB–AFT method to the primary resonance analysis of a dual-rotor system , 2017 .
[67] Jing Liu,et al. A new dynamic model for vibration analysis of a ball bearing due to a localized surface defect considering edge topographies , 2015 .
[68] Jean-Jacques Sinou,et al. Non-linear dynamics and contacts of an unbalanced flexible rotor supported on ball bearings , 2009 .
[69] Idriss El-Thalji,et al. A summary of fault modelling and predictive health monitoring of rolling element bearings , 2015 .
[70] Marijonas Bogdevičius,et al. Investigation of Dynamic Processes in Ball Bearings with Defects , 2013 .
[71] V. N. Patel,et al. A Dynamic Model for Vibration Studies of Deep Groove Ball Bearings Considering Single and Multiple Defects in Races , 2010 .
[72] Fengtao Wang,et al. Dynamic modelling for vibration analysis of a cylindrical roller bearing due to localized defects on raceways , 2015 .
[73] Hideyuki Tamura,et al. On the Radial Vibration of Ball Bearings (Computer Simulation) , 1984 .
[74] Yushu Chen,et al. Influencing factors of the dynamic hysteresis in varying compliance vibrations of a ball bearing , 2015 .
[75] Robert X. Gao,et al. Wavelets for fault diagnosis of rotary machines: A review with applications , 2014, Signal Process..
[76] Carl Q. Howard,et al. A nonlinear dynamic vibration model of defective bearings – The importance of modelling the finite size of rolling elements , 2015 .
[77] Jean-Jacques Sinou,et al. Stability and vibration analysis of a complex flexible rotor bearing system , 2008 .
[78] C. K. Babu,et al. Vibration Modeling of a Rigid Rotor Supported on the Lubricated Angular Contact Ball Bearings Considering Six Degrees of Freedom and Waviness on Balls and Races , 2012 .
[79] O. Prakash,et al. DYNAMIC RESPONSE OF AN UNBALANCED ROTOR SUPPORTED ON BALL BEARINGS , 2000 .
[80] Eihab M. Abdel-Rahman,et al. Vibrations of balanced fault-free ball bearings , 2010 .
[81] N Akturk,et al. Some characteristic parameters affecting the natural frequency of a rotating shaft supported by defect-free ball bearings , 2003 .
[82] Zheng Dezhi,et al. Nonlinear Dynamics Behaviors of a Rotor Roller Bearing System with Radial Clearances and Waviness Considered , 2008 .
[83] Jose Mathew,et al. A theoretical model to predict the effect of localized defect on vibrations associated with ball bearing , 2010 .
[84] O. Prakash,et al. EFFECT OF RADIAL INTERNAL CLEARANCE OF A BALL BEARING ON THE DYNAMICS OF A BALANCED HORIZONTAL ROTOR , 2000 .
[85] Fulei Chu,et al. Stability analysis of a rotor-bearing system with time-varying bearing stiffness due to finite number of balls and unbalanced force , 2013 .