Influence of chemical composition on sintering ability of ZTA ceramics consolidated from freeze dried granules

[1]  Christian Coddet,et al.  Study on structural evolution of nanostructured 3 mol% yttria stabilized zirconia coatings during low temperature ageing , 2009 .

[2]  Yong-Geun Choi,et al.  Heat transfer to the implant-bone interface during preparation of a zirconia/alumina abutment. , 2009, The International journal of oral & maxillofacial implants.

[3]  J. Ferreira,et al.  Hydrolysis-induced aqueous gelcasting for near-net shape forming of ZTA ceramic composites , 2009 .

[4]  J. Ferreira,et al.  Formation and Densification Behavior of MgAl2O4 Spinel: The Influence of Processing Parameters , 2008 .

[5]  Mehmet Avci,et al.  The implant-abutment interface of alumina and zirconia abutments. , 2008, Clinical implant dentistry and related research.

[6]  A. Brillante,et al.  Effect of the composition and sintering process on mechanical properties and residual stresses in zirconia-alumina composites , 2005 .

[7]  B. M. Reddy,et al.  Formation and Densification Behavior of Magnesium Aluminate Spinel: The Influence of CaO and Moisture in the Precursors , 2005 .

[8]  Patrick M. Kelly,et al.  Transformation Toughening in Zirconia‐Containing Ceramics , 2004 .

[9]  Suk‐Joong L. Kang,et al.  Experimental Evaluation of Toughening Mechanisms in Alumina-Zirconia Composites , 2004 .

[10]  M. Anglada,et al.  Fracture toughness of alumina and ZTA ceramics: microstructural coarsening effects , 2003 .

[11]  R. Chen,et al.  Mechanical properties of Al2O3/ZrO2 composites , 2002 .

[12]  G. Willmann.  Ceramic Femoral Heads for Total Hip Arthroplasty , 2000 .

[13]  John Wang,et al.  Zirconia-toughened alumina (ZTA) ceramics , 1989 .

[14]  Brian R. Lawn,et al.  A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I , 1981 .

[15]  J. Langford.  X‐ray diffraction procedures for polycrystalline and amorphous materials by H. P. Klug and L. E. Alexander , 1975 .

[16]  D. Schüler,et al.  Synthesis and Characterization , 2009 .

[17]  J. Ferreira,et al.  Synthesis and characterization of MgAl2O4–ZrO2 composites , 2009 .

[18]  J. Ferreira,et al.  Aqueous Colloidal Processing of ZTA Composites , 2009 .

[19]  O. Lyckfeldt,et al.  Influence of particle size distribution on colloidal processing of alumina , 1998 .

[20]  A. Kishioka,et al.  Sinterability of spinel (MgAl2O4)-Zirconia composite powder prepared by double nozzle ultrasonic spray pyrolysis , 1996 .

[21]  G. Willmann.  Development in medical-grade alumina during the past two decades , 1996 .

[22]  N. Claussen.  Fracture Toughness of Al2O3 with an Unstabilized ZrO2Dispersed Phase , 1976 .

[23]  L. Alexander,et al.  X-Ray diffraction procedures for polycrystalline and amorphous materials , 1974 .

[24]  W. H. Gitzen.  Alumina as a ceramic material , 1970 .