Reversible electrochemical switching of polymer brushes grafted onto conducting polymer films.

We demonstrate the electrochemical switching of conformation of surface-bound polymer brushes, by grafting environmentally sensitive polymer brushes from an electrochemically active conducting polymer (ECP). Using atom transfer radical polymerization (ATRP), we grafted zwitterionic betaine homopolymer and block copolymer brushes of poly(3-(methacryloylamido)propyl)-N,N'-dimethyl(3-sulfopropyl)ammonium hydroxide) (PMPDSAH) and poly(methyl methacrylate)-b-PMPDSAH, from an initiator, surface-coupled to a poly(pyrrole-co-pyrrolyl butyric acid) film. The changes in ionic solution composition in the surface layer, resulting from oxidation and reduction of the ECP, trigger a switch in conformation of the surface-bound polymer brushes, demonstrated here by electrochemical impedance spectroscopy (EIS) and in a change of wettability. The switch is dependent upon temperature in a way that is analogous to the temperature-dependent solubility and aggregation of similar betaine polymers in aqueous solution but has a quite different dependence on salt concentration in solution. The switch is fully reversible and reproducible. We interpret the switching behavior in terms of a transition to a "supercollapsed" state on the surface that is controlled by ions that balance the charge state of the ECP and are adsorbed to the opposite charges of the zwitterionic graft, close to the graft-ECP interface. The behavior is significantly modified by hydrophobic interactions of the block copolymer graft. We speculate that the synergistic combination of properties embodied in these "smart" materials may find applications in electrochemical control of surface wetting and in the interaction with biomolecules and living cells.

[1]  David E. Williams,et al.  Switchable surfaces of electroactive polymer brushes grafted from polythiophene ATRP-macroinitiator , 2012 .

[2]  K. Ishihara,et al.  Chain dimension of polyampholytes in solution and immobilized brush states , 2012 .

[3]  Z. Kroneková,et al.  Polysulfobetaine films prepared by electrografting technique for reduction of biofouling on electroconductive surfaces , 2011 .

[4]  I. Hunter,et al.  A superhydrophobic to superhydrophilic in situ wettability switch of microstructured polypyrrole surfaces. , 2011, Macromolecular rapid communications.

[5]  Chang‐Hwan Choi,et al.  Tunable wetting mechanism of polypyrrole surfaces and low-voltage droplet manipulation via redox. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[6]  John C. Heigl,et al.  Synthesis and Analysis of Zwitterionic Spherical Polyelectrolyte Brushes in Aqueous Solution , 2011 .

[7]  Yebang Tan,et al.  Synthesis and properties of hydrophobically modified acrylamide-based polysulfobetaines , 2011 .

[8]  Shaoyi Jiang,et al.  Poly(zwitterionic)protein conjugates offer increased stability without sacrificing binding affinity or bioactivity. , 2011, Nature chemistry.

[9]  K. Eichhorn,et al.  In situ studies on the switching behavior of ultrathin poly(acrylic acid) polyelectrolyte brushes in different aqueous environments. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[10]  Yebang Tan,et al.  A study of aggregation behavior of a sulfobetaine copolymer in dilute solution , 2010 .

[11]  J. Heinze,et al.  Electrochemistry of conducting polymers--persistent models and new concepts. , 2010, Chemical reviews.

[12]  M. Jouini,et al.  Carboxylic acid-functionalized, core–shell polystyrene@polypyrrole microspheres as platforms for the attachment of CdS nanoparticles , 2010 .

[13]  David E. Williams,et al.  Solvent-induced microstructure changes and consequences for electrochemical activity of redox-active conducting polymers , 2010 .

[14]  K. Eichhorn,et al.  In‐situ IR synchrotron mapping ellipsometry on stimuli‐responsive PAA‐b‐PS/PEG mixed polymer brushes , 2010 .

[15]  J. Hao,et al.  Reversibly switchable wettability. , 2010, Chemical Society reviews.

[16]  Xingpeng Guo,et al.  Influence of doping anions on the ion exchange behavior of polypyrrole , 2009 .

[17]  W. Huck,et al.  Electrolyte-modulated electrochemistry and electrocatalysis on ferrocene-terminated polyelectrolyte brushes , 2009 .

[18]  K. Teh,et al.  Influence of redox-induced restructuring of polypyrrole on its surface morphology and wettability , 2009 .

[19]  James D Bryers,et al.  Zwitterionic carboxybetaine polymer surfaces and their resistance to long-term biofilm formation. , 2009, Biomaterials.

[20]  I. Choi,et al.  The control of cell adhesion and detachment on thin films of thermoresponsive poly[(N-isopropylacrylamide)-r-((3-(methacryloylamino)propyl)-dimethyl(3-sulfopropyl)ammonium hydroxide)]. , 2009, Biomaterials.

[21]  G. Fredrickson,et al.  Theory of polyzwitterion conformations , 2009, 0908.2487.

[22]  H. Kaczmarek,et al.  AFM and XPS study of UV-irradiated poly(methyl methacrylate) films on glass and aluminum support , 2009 .

[23]  Jacob Klein,et al.  Lubrication at Physiological Pressures by Polyzwitterionic Brushes , 2009, Science.

[24]  Jianhai Yang,et al.  Double thermoresponsive polybetaine-based ABA triblock copolymers with capability to condense DNA , 2008 .

[25]  Zhongyi Jiang,et al.  Smart zwitterionic membranes with on/off behavior for protein transport. , 2008, The journal of physical chemistry. B.

[26]  Lei Jiang,et al.  Electrically Tunable Polypyrrole Inverse Opals with Switchable Stopband, Conductivity, and Wettability , 2008 .

[27]  Wenmiao Shu,et al.  Polyelectrolyte brush amplified electroactuation of microcantilevers. , 2008, Nano letters.

[28]  B. Piro,et al.  Ac-electrogravimetry study of ionic exchanges on a polypyrrole modified electrode in various electrolytes , 2007 .

[29]  Wilhelm T S Huck,et al.  Electrochemical characteristics of polyelectrolyte brushes with electroactive counterions. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[30]  D. Bendejacq,et al.  Reconciling low- and high-salt solution behavior of sulfobetaine polyzwitterions. , 2007, The journal of physical chemistry. B.

[31]  I. Choi,et al.  Highly efficient non-biofouling coating of zwitterionic polymers: poly((3-(methacryloylamino)propyl)-dimethyl(3-sulfopropyl)ammonium hydroxide). , 2007, Langmuir : the ACS journal of surfaces and colloids.

[32]  Wilhelm T. S. Huck,et al.  Tunable Wettability by Clicking Counterions Into Polyelectrolyte Brushes , 2007 .

[33]  Feng Zhou,et al.  Probing the responsive behavior of polyelectrolyte brushes using electrochemical impedance spectroscopy. , 2007, Analytical chemistry.

[34]  F. Martins,et al.  Design of an Excel Spreadsheet To Estimate Rate Constants, Determine Associated Errors, and Choose Curve's Extent , 2006 .

[35]  Wilhelm T S Huck,et al.  Mechanically induced generation of counterions inside surface-grafted charged macromolecular films: towards enhanced mechanotransduction in artificial systems. , 2006, Angewandte Chemie.

[36]  W. Huck,et al.  Surface grafted polymer brushes as ideal building blocks for "smart" surfaces. , 2006, Physical chemistry chemical physics : PCCP.

[37]  Magnus Berggren,et al.  Electrochemical control of surface wettability of poly(3-alkylthiophenes) , 2006 .

[38]  G. Georgiev,et al.  Self-assembly, antipolyelectrolyte effect, and nonbiofouling properties of polyzwitterions. , 2006, Biomacromolecules.

[39]  Wilhelm T S Huck,et al.  UCST wetting transitions of polyzwitterionic brushes driven by self-association. , 2006, Angewandte Chemie.

[40]  Wilfred Chen,et al.  Reversible conversion of conducting polymer films from superhydrophobic to superhydrophilic. , 2005, Angewandte Chemie.

[41]  W. Huck,et al.  AFM study of cationically charged polymer brushes: switching between soft and hard matter. , 2005, Soft matter.

[42]  I. Berlinova,et al.  Electrostatic self-assembly of thermally responsive zwitterionic poly(N-isopropylacrylamide) and poly(ethylene oxide) modified with ionic groups , 2005 .

[43]  T. Ghosh,et al.  On the salt-induced stabilization of pair and many-body hydrophobic interactions. , 2005, The journal of physical chemistry. B.

[44]  Michael J. Fevola,et al.  Hydrophobically modified acrylamide‐based polybetaines. I. Synthesis, characterization, and stimuli‐responsive solution behavior , 2004 .

[45]  M. Berggren,et al.  A Solid‐State Organic Electronic Wettability Switch , 2004 .

[46]  K. Irgum,et al.  Control of electroosmotic flow and wall interactions in capillary electrophoresis capillaries by photografted zwitterionic polymer surface layers. , 2003, Analytical chemistry.

[47]  A. Calarco,et al.  New polyelectrolyte hydrogels for biomedical applications , 2003 .

[48]  S. Demoustier‐Champagne,et al.  Surface initiated polymerization of styrene from a carboxylic acid functionalized polypyrrole coated electrode , 2003 .

[49]  C. McCormick,et al.  Synthesis and solution properties of zwitterionic polymers. , 2002, Chemical reviews.

[50]  J. Bisquert,et al.  Impedance analysis of galvanostatically synthesized polypyrrole films. Correlation of ionic diffusion and capacitance parameters with the electrode morphology , 2002 .

[51]  H. Tenhu,et al.  Dissolution and aggregation of a poly(NIPA-block-sulfobetaine) copolymer in water and saline aqueous solutions , 2002 .

[52]  Darren M. Jones,et al.  Surface-Initiated Polymerizations in Aqueous Media: Effect of Initiator Density , 2002 .

[53]  L. Abrantes,et al.  Study of DNA hybridization on polypyrrole grafted with oligonucleotides by photocurrent spectroscopy. , 2001, Biosensors & bioelectronics.

[54]  K. Matyjaszewski,et al.  Functional polymers by atom transfer radical polymerization , 2001 .

[55]  S. Feller,et al.  Error Estimates for Fitted Parameters: Application to HCl/DCl Vibrational-Rotational Spectroscopy , 2001 .

[56]  A. Shard,et al.  XPS and AFM surface studies of solvent-cast PS/PMMA blends , 2001 .

[57]  N. S. Ferriols,et al.  Application of a distributed impedance model in the analysis of conducting polymer films , 2000 .

[58]  W. Brittain,et al.  Polymer brushes: surface-immobilized macromolecules , 2000 .

[59]  R. D. Levie,et al.  Estimating Parameter Precision in Nonlinear Least Squares with Excel's Solver , 1999 .

[60]  Albert Compte,et al.  Anomalous transport effects in the impedance of porous film electrodes , 1999 .

[61]  G. Inzelt,et al.  Electrochemical quartz crystal microbalance study of ion transport accompanying charging-discharging of poly(pyrrole) films , 1999 .

[62]  F. Fabregat‐Santiago,et al.  Frequency dispersion in electrochromic devices and conducting polymer electrodes: A generalized transmission line approach , 1999 .

[63]  M. D. Levi,et al.  Influence of ionic size on the mechanism of electrochemical doping of polypyrrole films studied by cyclic voltammetry , 1997 .

[64]  K. Kallury,et al.  Pyrrole copolymerization and polymer derivatization studied by x-ray photoelectron spectroscopy , 1992 .

[65]  Schmeisser,et al.  Electronic structure of polypyrrole films. , 1991, Physical review. B, Condensed matter.

[66]  A. Schouten,et al.  Thin-Film Behavior of Poly(methyl methacrylates). 2. An FT-IR Study of Langmuir-Blodgett Films of Isotactic PMMA , 1991 .

[67]  O. Inganäs,et al.  Polythiophene with a free amino acid side chain , 1991 .

[68]  A. Underhill,et al.  Electrochemistry of polypyrrole films , 1987 .

[69]  V. Soto,et al.  Poly(sulphopropylbetaines): 2. Dilute solution properties , 1984 .

[70]  P. Pfluger,et al.  Chemical, electronic, and structural properties of conducting heterocyclic polymers: A view by XPS , 1984 .

[71]  J. A. Logan,et al.  Electrochemistry of conducting polypyrrole films , 1981 .

[72]  R. Hart,et al.  New polyampholytes: The polysulfobetaines , 1958 .